I have PCI-4452-this card does not work with XP. Are there fixs available?

I have the PCI-4452, i fould that when i installed XP on my system, the card does not work. Does this card have any drivers for ir to work on XP. Or do i have to stay on NT.

Hello,
This card is actually supported under XP for use with drivers since 6.9.2 and above (only traditional driver).
Kind Regards
Steven Bird
Applications Engineer
National Instruments

Similar Messages

  • Want to open Kodak Photo CD files (.PCD) in Photoshop CS5.  In CS4 i copied file "Photo CD.8BI"  from an older version into the File Format folder.  This does not work with CS5.  Any fix?

    I have several old Kodak Photo CD with PCD image files.  I am now using Photoshop CS5.  Some years ago while using Photoshop CS4 I copied a file:  "Photo CD.8BI" from an older, CS2, version to the Plug-ins/File Format folder of CS4.  This does not appear to work with CS5.  Any fix?

    It can be made to work, but you have to run the 32 bit version of Photoshop CS5, and as I recall there's an additional DLL called pcdlib32.dll that's needed from the old installation.
    See also:  Open Kodak PhotoCD files in PS CS5 - is it possible? (Win XP)
    -Noel

  • Help!! after I upgrade os vga card does not work with my ipad2...

    I use ipad2 my class presentations. VGA cable was fascinating to show most of ipad screens, but after I upgraded os it does not working any more.... os bugs? Please give me advices.... I need to use it this week!
    Dan

    As of Firefox 4.0 and newer one needs at least OSX 10.5+ and Intel hardware.
    The latest you can use on your Intel with OSX 10.4.11 is Firefox 3.6.25 (released recently) which can be found at http://www.mozilla.org/en-US/firefox/all-older.html
    If you were to update to say OSX 10.5.8 then you can use Firefox 9.0.1

  • HT1414 I have intelos and my Iphone does not work in some areas or in my house. I have had Apple replace it 2 times with the same problem. My android worked fine in all places....what's wrong with this? It's killing my business!! Any ideas to fix it??

    Please help me understand why my I phone 4s is not working in some places and my HOME!! I have been to Apple 3 times and Intelos 5 times and no one knows whats wrong and they are telling me that no one else is having this problem. It's hurting my business because I can't get calls at home. I paid a lot of money for this and may have to pay to get out of it.  I thought Apple was a good company but am changing my mind quick.

    OK, restart in Safe Mode, this will clear some caches. It's possible one or more is corrupt. To restart in Safe Mode when you hear the start up tone hold down the Shift Key until you see a progress bar. Let it fully boot then restart normally and test.
    Also I am assuming you have checked Finder - Preferences  - General and see what boxes are checked in "Show these items on desktop." You can also mount an item in Disk Utility, simply highlight it and then look in the File menu for Mount.....

  • Satellite Pro 4600 Wireless card does not work with WIN2K ?

    I have a Satellite Pro 4600 with UK dealer installed PA3070U-1MPC wireless card running with Windows 2000
    The wireless client manager finds the network of my wireless router and reports the signal is excellent and I see all green bars swhowing.
    However I can't mske a connection, in 'connections' the wireless one says 'network cable is disconnected'
    the router works ok with other laptops in my house.
    I have latest version of Win2K also have downloaded and installed latest versions of client manager and WLAN card driver for win2k from toshiba website.
    The 'toshiba support in Turkey' told me 'I need a different driver for Win2K for my wireless card cause the win2K driver on the toshiba website is not for 'this' wireless card'. I have waited for this for 3 weeks now and have been unable to reach the elusive UK Level 3 support who supposedly have this driver. I have seen on the internet the same wireless card is has been sold as a 'made by toshiba' accessory and it says it is compatible with Wim2K
    What do I do next please ? Does this run at all with Win2K , is there 'another driver' and so on ?
    Thanks

    hello
    please be more scpecific - what do you mean by 'disconnect the LAN' - I have nothing conneced there anyway ? do you mean 'disable' the LAN even though there is nothing plugged in ? can you please post the exact sequence of this so I can try ir too.
    In the meantime my laptop has been to Toshiba for them to sort out at their highest level UK support base. I was hoping my troubles would be over - but no, read below what happened. They are basically saying my win2k is not in order but I had just installed and updated it so right now I haven't a clue what to do next.
    START QUOTE of Toshiba Support response:
    Sat Pro 4600
    Serial No: 31474181G
    Windows 2000 SP4 (customers build not recovery CD)
    BIOS V1.80 not current therefore updated to V2.60
    The notebooks wireless card is functional and has the correct driver installed, it also has the correct and latest version of the Wireless Client Manager. The wireless function appears to see the router but will not connect and obtain an IP address. Irrespective of the settings applied within Internet Explorer or the Wireless client manager you cannot obtain a connection. The customer did not have any Toshiba utilities installed such as, Power Saver, Common Modules, Chipset drivers, network device switch, I therefore installed these missing components and updated the BIOS to the most current revision. However despite this the unit will still not connect to the wireless.
    I therefore removed the customers HDD and replaced his HDD with a Toshiba loan HDD with a fresh build that I had created. When using the machine with this build the wireless connected without issue and I was able to browse the internet etc. I placed the customers HDD into our machine and the problem with the wireless was replicated on our machine here, therefore the problem is not with the wireless card or any hardware aspect of the machine, the problem lies with the customer's build of Win 2000. I examined for anything obvious but could not find anything, therefore I'm sending this machine back to customer with the advice that his build needs addressing or he needs to reload Win 2000 his machine.
    As you can see from the above comments, the machine performs as per specification with loan HDD and fresh build of Win 2000 installed, the problem is only present with you HDD and build in the machine. In addition to this I have replaced the missing screws on the base of the machine ensuring the machine is structure is maintained.
    5 x B16 Screws
    1 x B6 Screw
    1 x Memory Cover Screw
    END QUOTE

  • ESATA express card does not work with Mavericks. Any suggestions?

    This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
    Thanks for any help or suggestions.

    The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.

  • Airport card does not work with Airport Extreme when security is turned on

    I have an iMac running OSX 10.4.11 with an Airport card installed (firmware version 9.52).
    I recently replaced my Netgear wireless router with an Apple Extreme Base station and now I am not able to connect my iMac to the wireless network when WEP security is turned on - I get an error from the Airport Setup Assistant when I attempt to connect to the wireless network.
    It works fine if the wireless security on the Extreme Base station is turned off.
    Please help and thanks in advance.
    Motasim

    First, I highly recommend that you switch to either WPA or WPA2 as WEP is no longer considered secure. If you must use WEP, I suggest that you try the following:
    o Re-create the Network Name (SSID) on your AirPort Extreme Base Station (AEBS)
    o Try using 128-bit WEP, with a 26-Hex character key for the encryption type.

  • PCI USB Card Does NOT Work With Mass Storage Devices

    I have a StarTech PCI card with 6 USB 2.0 ports that I inserted in my 500 MHz (overclocked) B&W Power Mac G3. It works great for any USB device EXCEPT for any hard drive or DVD/CD-RW drive. I checked the system.log file for errors. Nothing shows up in System Profiler or Disk Utility, obviously. Here's what it consistently says:
    Dec 16 23:33:28 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 674.997 [0xf9c000] The IOUSBFamily is having trouble enumerating a USB device that has been plugged in. It will keep retrying. (Port 6 of hub @ location: 0x62000000)
    Dec 16 23:33:33 Geoff-Myers-Power-Mac-G3 kernel[0]: USBF: 679.977 [0xf9c000] The IOUSBFamily was not able to enumerate a device.
    I'm running the latest version of Mac OS X Tiger 10.4.3. What is wrong? StarTech doesn't have a driver, but nothing should be necessary. Is there a 3rd party USB Mass Storage Device driver that might work better than the Apple generic driver? PLEASE HELP ME! I cannot live with USB 1.1.

    Some users have reported problems with certain brand cards and their controller chipsets, so trying a different card may resolve the problem. Keyspan and Macally are often mentioned as being more "Mac-friendly" than some other lessser-known brands or generic cards. Does the card have a mini-power port to supplement the power requirements? With USB 2.0, each port is on a separate bus, so a card with six ports should have one. To minimize the overall draw on the available power, I prefer to install USB cards with as few ports as are needed.

  • Sonnet pro express card does not work with lion 7.3.4 warning

    After upgrading to Lion 7.3.4 my volumes attached via a Sonnet Express Pro 34 card via SATA no longer mount.
    I have the current driver from Sonnet 2.2.8
    The volumes appear in Disk Utility, AND pass both the disk verify and repair
    However, attempts to mount the volumes result in a message from Disk Utility to attempt repairing the disk

    Tried deinstalling and reinstalling the Sonnet driver. Doesn't help.
    Really odd that the drives will readly pass Disk Utility's first aid checks and repairs, spin up and down under Disk Utility, but simply won't mount.
    Revereted back to 10.7.3 and now back on line.
    Hopefully Sonnet will create a fix, but wow, could be Lion 10.7.4's fault given that the underlying drive structure looks sound to Disk Utility (even under 10.7.4).  Lion 10.7.4 dislikes something about the Sonnet Tempo Pro Expresscard/34 sata connected drives.

  • Microsof VX 3000 or 6000 Webcam does not work with Lync 2013 under Windows 8.1

    Hi,
    The problem is that i cannot use the Microsoft VX-3000 or VX-6000 with Lync 2013 under Windows 8.1.
    If i go in settings under Video i can see the preview from the webcam just fine, so it works there no problem.
    Wenn i try to enable my camera in a conference it does not work, i get an error: Your video cannot be started.
    Now, there are no Windows 8.1 drivers for the Webcam so i installed the latest Windows 7 drivers. Because of that this webcam does not work with apps, that is fine i understand the driver problem and the way the new apps work.
    But this Webcam works with skype under Windows 8.1 and it works with Lync 2010 client.
    The same Webcam works just fine with Lync 2013 under Windows 7.
    Is there anything i could do so that i get this Webcam to work with Lync 2013 desktop client under Windows 8.1?
    Thanks

    Hi,
    According to your description, it may be caused by driver.
    You can try to install the latest version of Display Driver to fix the display issue.
    Since there is no driver for Windows 8.1, I suggest you wait for updating.
    You can also post a case on Windows 8 forum, thank you for your understanding:
    http://social.technet.microsoft.com/Forums/en-US/home?forum=W8ITProPreRel%2Cw81previtpro&filter=alltypes&sort=lastpostdesc
    Best Regards,
    Eason Huang
    Eason Huang
    TechNet Community Support

  • I bought this iPhone from Apple Retail Store for the full amount, but  it does not work with my SIM card only works with AT&T

    Hello,
    I have an iPhone 4S 32Gb White AT&T, product part No. MC921LL/A, Serial No. C39GMLPWDTDC
    I bought this iPhone from Apple Retail Store (from Fifth Avenue, NY) for the full amount. Now it does not work with my SIM card only works with AT&T. I restored the phone several times, but I have not received "Congratulations your iPhone has been unlocked". Please activate my iPhone to work with different SIM cards
    Thanks,
    Best Wishes

    When did you buy it?
    Apple did not begin selling an unlocked version of the iPhone 4S in the US until 11/11/11. I believe it went on sale only through the online store at that time. I'm not sure if it's available at retail yet.
    What you purchased was a phone without a contract commitment. It is still locked to AT&T. AT&T will NOT unlock iPhones for any reason.  Return it and get your money back, then use that to purchase an unlocked phone.

  • HT1409 I have done this but it does not work with one of my albums and I dont know why??

    I have done this but it does not work with one of my albums and I dont know why??

    That would be it. Sometimes you can tweak the album & artist names enough for iTunes to download matching art from the store, or you could add a bonus track featuring 1 second of silence and attach artwork to that, or you could convert the files to Apple Lossless.
    tt2

  • I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your

    I have a comment.  I am very upset with Photoshop and all your tutorials regarding the quick select tool.  I have watched many tutorials and read instructions until I am blue in the face.  This tool does not work.  It is all over the place and all of your tutorials make it look so simple.  How can you advertise this as a viable tool when it just doesn't work?

    It is all over the place and all of your tutorials make it look so simple.
    This is a user to user Forum, so you are not really addressing Adobe here, even though some Adobe employees thankfully have been dropping by.
    How can you advertise this as a viable tool when it just doesn't work?
    Concluding something does not work because you fail at using it is not necessarily always justified.
    The Quick Selection Tool certainly has limitations, but your post seems to be more about venting than trouble-shooting – otherwise you might have posted an image where you failed to get an expected result.

  • Wireless Card does not work in Windows 8.1 for G585

    I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
    For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview .  If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

    neilwar wrote:
    Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
    Please refer to the dedicated thread on "Blue" 8.1.
    Thread locked
    Andy  ______________________________________
    Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
    Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
      Deutsche Community     Comunidad en Español    English Community Русскоязычное Сообщество
    PepperonI blog 

  • I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Question
    I have upgraded firefox 4 to firefox 5 but it does not work with real player record plugin 14.0.3......so I want to revert the upgrade to 4....please give me solution or firefox 4

    Go to your actual realplayer (program), click the top right button (Realplayer with an downwards arrow) and update your software. Make sure Firefox is closed while you do this.
    ::Worked for me::

Maybe you are looking for