I have photoshop cs3, and often get "no disc error in drive -x-" error (optical drive)...

Frequently when I startup my PS CS3 within the startup sequence for the software it pops up the error "No Disc in Drive E:" - which refers to an optical drive on my computer which I very rarely even use. I click "Continue" and it pops up again - sometimes 3 times - after which PS loads perfectly fine.
[Yes, I know it's old software - I work for a not-for-profit, so please indulge my use of old software...]
I double checked my scratch disc settings and they don't refer to the E: drive of course it's not even available as an option, but I figured I'd check anyway.
Any other places / settings I can check to remedy this? Any one else come across this?
As to some background for my usage of PS - I work as a graphics designer and media director in a not-for-profit and work several hours each day with it - so typically it is 'open' in my windows XP system for several days at a time until I see memory / performance hits begin to surface and completely close it to restart later in day. I have 2.33Ghz Dual Core with 2G of Ram. My 'threshold' for considering closing the app is when the Virtual Memory (or Working Set Memory) gets up to 850-900meg.

were you able to get help on this? I need help on error 5002 as well. thank you

Similar Messages

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

I keep trying to download Photoshop CS3 and a get a 404 error page, does Photoshop CS3 not working with a new Mac operating system?

you must also use a browser that allows cookies. try a different browser or download from adobe.com
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 12 | 11, 10 | 9, 8, 7
Photoshop Elements: 12 | 11, 10 | 9,8,7
Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Photoshop CS3 and ATI Radeon 2600XT Graphics ERRORS

I am Running photoshop CS3 on a mac pro 2.8GHz 8-core with and ATI Radeon 2600XT graphics card. On any size file, from a small jpeg to an enormous tif, any time I pan around the image, the monitor will repeat a section of the image over and over to fill the screen. That is to say, panning vertically will fill the screen with copies of a random horizontal section of the image (20pixels wide or so). The effect goes away as soon as I perform another action that affects the entire image (zoom, action undo, create new layer, etc.). I have updated photoshop and osx with all available software and firmware updates.
An example of what this looks like: http://www.flickr.com/photos/26107441@N02/2450960322/

I am running the same Mac hardware with a Mitsubishi 2060u, 1600x1200, 85Hz (CRT). I am having no such issues with PS CS3. I tried the monitor at 60Hz as well which also worked fine.
Do you have all the latest updates installed including the 2600 firmware update?
-Keith

I have photoshop CS3 and just upgraded to Yosemite on my Mac. Asking me to install the legacy Java SE 6 runtime?? How do I do that??

Asking me to install the legacy Java SE 6 runtime?? How do I do that??

This is the java you need from apple
http://support.apple.com/kb/DL1572

I have installed axis but i get the following error java.util.MissingResour

i have installed axis and i get the following error when i try to acces from
http://localhost:8080/axis/axis/index.jsp
java.util.MissingResourceException: Can't find bundle for base name i18n, locale en_US
     java.util.ResourceBundle.throwMissingResourceException(ResourceBundle.java:836)
     java.util.ResourceBundle.getBundleImpl(ResourceBundle.java:805)
     java.util.ResourceBundle.getBundle(ResourceBundle.java:576)
     org.apache.jsp.axis.happyaxis_jsp.getRB(happyaxis_jsp.java:325)
     org.apache.jsp.axis.happyaxis_jsp.getMessage(happyaxis_jsp.java:421)
     org.apache.jsp.axis.happyaxis_jsp.getMessage(happyaxis_jsp.java:359)
     org.apache.jsp.axis.happyaxis_jsp._jspService(happyaxis_jsp.java:557)
     org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

the following is the entire error:
org.apache.jasper.JasperException: Exception in JSP: /axis/i18nLib.jsp:20
17: * limitations under the License.
18: */
19: %>
20:
21: <%@ include file="i18nLib.jsp" %>
22:
23: <%
Stacktrace:
     org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:506)
     org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:395)
     org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
     org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
     javax.servlet.http.HttpServlet.service(HttpServlet.java:810)
     org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)

I have photoshop cs3 on a mac powerbook running Os 10.10.2 I am getting a" licensing has stopped working" text box. I can reinstall because I can't get a copy of CS3 from eh website

I have photoshop cs3 on a mac powerbook running Os 10.10.2 I am getting a" licensing has stopped working" text box. I can reinstall because I can't get a copy of CS3 from eh website

https://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7.1| 5 | 4 | 3 | 2.7(win),2.7(mac)
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

How to get accurate photo printouts using calibrated FlexScan S1932 , Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

How to get accurate photo printouts using FlexScan S1932 screen, Photoshop CS3 and Canon MX925 ? ALL ARE calibrated with i1Pro . WHO SHOULD GOVERN THE PRINTOUT , THE CS3 OR THE PRINTER ?

You need to work with the calibration parameters to get a good match from screen to print. There are no fixed values - basically whatever settings produce a match are the right ones.
First, set the white point - luminance and color - so that screen white is a visual equivalent to paper white. You can be very specific about this, with a viewing booth right next to the display and a particular paper as target. Or you can take a more generalistic approach. That too will usually work well, as long as you keep the aim in sight: screen white = paper white.
Don't trust the white point presets. You will usually have to adjust to compensate for your working environment. Make sure you can adjust both along the blue/yellow Kelvin scale and the green/magenta axis. Any given Kelvin value may well be wrong on the green/magenta axis.
Next set a realistic black point. This is important. Monitor manufacturers throw about completely unrealistic contrast ranges that you will never see on paper. A good glossy inkjet paper will be in the vicinity of 250-300:1, or a black point around 0.4 - 0.5 cd/m² if your white point is at 120. If you have a monitor that goes down to, say, 0.2, which most monitors today will, you're in for an unpleasant surprise.
Leave gamma at 2.2. Gamma is remapped from profile to profile and is "invisible" - the net result is always linear. You just want to stay close to native so that the monitor behaves at its best.
If you have a wide gamut monitor soft proofing in Photoshop can be useful. With a standard gamut monitor it's mostly a waste of time since monitor gamut is the limiting one.
Oh, and let Photoshop manage color. Make sure you have the right paper/ink profile and also make sure you have the right paper selected in the printer driver. This controls the total amount of ink.

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9. According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When I try to open Nikon D810 NEF files, I get photoshop error that says "cannot complete

Currently Have Photoshop CS3 & Adobe Bridge CS3 2.1.1.9.
According to Adobe, Camera Raw 4.6 supports Nikon D810 NEF files. I have downloaded Camera Raw 4.6 Update. When
I try to open Nikon D810 NEF files, I get photoshop error that says
"cannot complete request your because it is not the right kind of
document. These NEF files wont open in Bridge at all. What am I doing wrong?

Camera Raw plug-in | Supported cameras

I have Photoshop CS5 and am trying to download the Camera Raw plug in which will enable me to look at RAW images from a Nikon D800 . The download appears in my " Downloads " folder but when I try to open a RAW image I get a message up which says it can't

I have Photoshop CS5 and am trying to download the Camera Raw Plug in that will allow me to open images taken with a D800 camera .
It appears the download has been successful when I look in my " Downloads " Folder but I still get a message up saying the installed version of Camera RAW won't support the Camera model ( i.e. D800 ) . What am I missing ??
Tony Fletcher

You need to download and install Camera Raw 6.7.1 for CS5. Once you have downloaded it, you need to install it while CS5 is closed.
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Once downloaded, unzip/unpack the file, and run the executable to start the update, following the instructions.

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

I'm new to Photoshop Elements and just getting started. While in the organizer I have one group of photos up to learn with and now it says Edit in Progress with a padlock icon. How can I remove this so that the photos will be restored to normal?

Go back to the editor and close the photo there.

I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?

I have Photoshop CS5 and my image processor and batch tool are gone. How do I get them back?
I went into edit preference and all the start up scrips are selected so what else is there?

When you installed CS5, you have a chance to register it. If you do, your serial number is on file under your Adobe (My Products). If you did not, you have no serial number on file and even worse, no proof you own it.
You do not have your serial number copied down anywhere? Hard to believe you tossed the dvd box and all the documents away.
So Help > Register might give you a chance to do this without you knowing the number.
If not, you may want to consider the Photography Plan. Creative Cloud Photography plan | Adobe Creative Cloud

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

I have photoshop cc and a mac book pro. I cannot access my photos from photoshop. I can go to iPhoto and click edit to edit them in photoshop, but photoshop won't open them. I want to do a collage, so I need to get to more than one photo.

See if exporting them helps:
Exporting From iPhoto | Apple Support Communities
Gene

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that?

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

I have photoshop cs5 and want the cs5 extended for the 3D option. How do I get that? And whats this Creative cloud crap? I dont keep up new adobe stuff.

Canon 5D Mark II, Photoshop CS3 and Lightroom 2.4

All,
I know that this has to have been answered elsewhere, but I have not found what I'm looking for.
I have purchased a new Canon 5D Mark II camera which will arrive Wednesday. As far as software on my Mac Pro, I have Adobe Creative Suite 3 Design Premium, which includes (obviously) Photoshop CS3. I am also running Lightroom 2.4. I am under the understanding that in order to open RAW files from the 5D Mark II, you need to have Adobe Camera Raw 5.X, which is not supported by Photoshop CS3. I also understand that Lightroom 2.4 CAN open the 5D Mark II RAW files. First off, are both of my statements to this point accurate? If so, can I use Lightroom to open the RAW files, do whatever adjusting I would like in Lightroom, then export the modified file (in TIFF, for example) to Photoshop CS3, and go on my way? Or will this not work?
If the answer is no, what are my options for using the software that I have with my Canon 5D Mark II? Am I REQUIRED, now, to upgrade to Photoshop CS4? If so, can I buy the CS4 Upgrade for Design Premium, if my CS3 Design Premium is the Education version?
Thanks for any help on this...I'm hoping to avoid spending any more money than I need to in software just to be able to process images from my new camera. I'm sure I could always use the Canon supplied software to open the RAW files, but I'd prefer to do so in the Adobe family of programs.

cabasner,
I upgraded to CS4 when I got my 5D2, and I can't stress enough how much better CS4 is. It's worth the upgrade even if you didn't get the 5D2. It's more stable that CS3, and ACR is insanely better (as is the Bridge... that's actually usable now!). ACR in CS4 has Adjustment brushes for Exposure... that's right, touch-up areas in ACR and it's totally non-destructive. Vibrance has been added also. In PS, your Dodge & Burn tools have a totally new algorithm which works so much better it's nuts. You even have a Legacy checkbox to see the difference. With the insane amount of image data in the 5D2, those tools work very well. You also have OpenGL support in CS4 now, which means you can view the image at any percentage and it looks like 25/50/75/100. And since your graphics card is now used, Photoshop CS4 is FASTER. And with the Clone Tool you can see what will be put down on the image inside the tool's circle, BEFORE you press the mouse. Talk about an easy way to line up the edit! Oh, then there's all the Adjustment layers... man, talk about a non-destructive time-saving edit! And the panels now stay off to the side, not covering up the image anymore. There's more, I'm, not even remembering everything. Adobe got PS right with this version. I would spring for CS4 in a New York minute, it's the perfect partner for our 5D2s.

Photoshop CS3 and Epson R2400

Since I installed Leo on my Mac Pro, my R2400 will not work as it used to. I can not access the printers option menu where I can setup the paper, printer resolution, etc. When I am printing out of photoshop CS3 I will only get a standard printer menu provided by Mac OS and not by epson. I can´t change any settings and the prints come out terrible. I use the latest Epson driver - 6.12 - but nothing works as it should. Does anybody experience the same problems or might have a solution for this? I got plenty of print jobs to do before christmas! Thank you for any hints ... Jochen, Germany

Jochen,
I managed to get my 2400 printing OK now. I spent a completely wasted hour e-talking to Epson UK Support yesterday. They offered nothing useful and spent all the time telling me to do obvious things, which was very frustrating. Then I decided to go back to basics. I ditched all the personalised settings in all the print dialogue boxes and tried printing with only basic settings. I had professional print profiles for each of my papers and printers, but none of these will now work and I think that they were the crux of the problem.
This is what I did:
Step 1 - I turned off my printer. After ditching the entire Epson folder from the library and restarting Leopard, I downloaded the current Mac drivers from the Epson Support website and started by reinstalling the 2400 from scratch. I turned on my printer. I ran the downloaded installer and then went into Apple/Preferences/printers and faxes and removed the 2400 that leopard had installed with the gutenburg driver. I then installed the 2400 again through this screen and checked that the downloaded Epson 6.12 driver had installed. It had.
Step 2 - I went to page set-up for the photo I wanted to print in Photoshop CS3 and in Format For: I selected Epson Stylus Photo R2400 and in paper size: I selected A4 (sheet feeder - borderless) and clicked OK
Step 3 - I selected File/print. In Printer I selected Epson Stylus Photo R2400. In colour handling I selected Printer Manages Colour and in Rendering Intent I selected Relative Colorimetric. The I pressed the Print button.
step 4 - I then pressed Proceed in the larger than paper dialogue box taht then appeared and this closed.
Step 5 - This brings you to the Epson Printer Dialogue box. I selected the Print Settings section and selected Premium Glossy Photo paper as the Media Type. In colour settings I selected Epson Standard (sRGB). and selected the Advanced radar button below and best photo as the print quality. When I pressed print I got a good quality print....and it seems to work every time now!
I have also tried this with my Epson 950 and it also works. In fact I am getting better prints with this one than I was before Leopard!
Don't ask my why it is working this way. I don't know. I used to let Photoshop CS3 manage the colour using my profiles, but this will not work now. I suspect that as my profiles were done in tiger they are Tiger dependent. I will contact my supplier next week and discuss this with him. I am still disappointed that I seem to have lost complete control over my printing and blame Apple and Epson in equal measure. From my "discussions" with Epson support it is clear that their "fix" is aimed at the amateur user and not those requiring control over the production phase!
I hope this helps.
David

I have photoshop cs3, and often get "no disc error in drive -x-" error (optical drive)...

Similar Messages

Maybe you are looking for