I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for this file DSC-ARW. Whatelse I should be doing to see my pictures? Can someone help?
Anita

The support for that camera was added in the very latest release of Lightroom, version 5.7.1. Having downloaded Camera Raw 8.7.1 will have no effect on Lightroom because Lightroom doesn't use the Camera Raw plug-in. You need to make sure you have updated Lightroom to the very latest release in order to have support for that camera.

Similar Messages

Issues with iphone 5 and Lightroom 5.5 preview unavailable for this file

Hi, I've just started to use lightroom but it's been giving me a lot of issues. I've downloaded all of my iphone 5 photos onto my desktop and I'm trying to import those files into Lightroom 5.5 However every single one of those files says "Preview unavailable for this file". I've tried searching for answers but couldn't find a solution so easily. Wondering if anyone can help?

I have images in iPhoto too (pocket camera/phone stuff) and have added some of them to my LR catalog. In the LR import dialog the iphoto folder location should be: macintosh HD/users/(your user name)/Pictures/iPhoto Library/originals from there you should see separate subfolders for each year.
Another test: go to the iphoto library in the finder and copy(not move) some of the images that aren't behaving to your desktop and then try importing those to LR.
Hopefully your HD isn't corrupted or the files themselves corrupted. I agree that you should use the format card option and not the delete all images when clearing images from CF or SD card in camera.
Did you see my post about purging your raw cache? To do that go to the Lightroom drop down menu at the top next to the apple, select preferences (shortcut is command + ,), then go to the file handling tab, at the bottom you will see camera raw cache settings, click the button that says purge cache.
To render standard previews go to the application menu bar along the top, Library/Previews/ then there's the option to render standard previews, render 1:1's or discard 1:1's. This step only deals with previews in the library module. The purge raw cache option deals with the raw previews generated in the develop module.
If they were raw files I was going to suggest opening them up in bridge ACR or PS to check file integrity. Like a second opinion. You could download a trial version of the software from adobe.
You might also want to check the image's file info as well. Locate the original raw file in your finder window, select a raw file giving you issues and hit command + i if the file size is several mb that's good. if the file is 0 or a few kb then you have a problem.

How to view .shtml files locally? I have added "Open in Browser" but still not able to see the local .shtml file.

I have added Open in browser add ons in Firefox browser, but still not able to see the .shtml files on local machine.
Can any one please tell me how to view .shtml files in Firefox?

SHTML files are regular HTML files that make use of Server-Side Includes. In some server configurations, the special file extension is required to instruct the server to parse the file for SSI code.
If Firefox doesn't recognize the file type, it is likely the MIME type is incorrect.
Try this Addons
*https://addons.mozilla.org/en-US/firefox/addon/open-in-browser/

When i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

when i want to create a face time it tells me to vertify my email address. When i go to do this i have to type in my apple ID and password on the Apple website, however when ever i do this i get a message saying Invalid account for this Email Address..

Same problem here. Whats the deal?! Apple??

HT3529 I am still not able to text several people on i message,since we updated our devices

I am still not able to text several people on i message,people I used to always text ,one has the i phone 4s and the other one has the i phone 3
ever since the update I can no longer send them any messages ,they will not send , the send button is blue and then turnes green please help, this is driving me crazy,I have tried everything I could including taking them out of my phone comletely, and they have done the same.

I am still not able to text several people on i message,people I used to always text ,one has the i phone 4s and the other one has the i phone 3
ever since the update I can no longer send them any messages ,they will not send , the send button is blue and then turnes green please help, this is driving me crazy,I have tried everything I could including taking them out of my phone comletely, and they have done the same.

Users not able to see remote users on the node network

Users that belong to one node are not able to see users in another calendar
server node. Both calendar servers are pointing to the same directory server.
Some errors that occur in the log files:
DEXOTEK ERRCODE Ox13608 -> SchedBaseOpen: Section name too long
DEXOTEK ERRCODE Ox13608 -> OpenConnection: SchedBaseOpenOnHost
And when uninode -cws nodeID is run, it does not report being able to see all
the users and resources on the remote nodes.
uninode: connected to hostname.net.xxx.com, node 10000
directory of items: 10 (USERS = 10/RESOURCES = 0)
CONNECTION EX AV Q-SIZE IN-PROCESS IMPORT-DIR
(10000)->xxxxxx.xxx.com(10001) 2 2 0 0 370 (U=370/R=0)
Here is the nodes.ini file:
+ H=xxxxxxx.xxx.com/N=10000
+ H=xxxx.xxx.com/N=10001
all=2
There is a reported bug, that 16 chars is max on domain names for the nodes.ini
file, which means that you need to change that file and use:
     a) an alias that can be resolved on the network with either DNS or local
     host files
     b) use the IP address.
As documented in the release notes, here is the procedure on how to modify the
hostname when it is too long. Or how to modify the hostname for any reason.
Fix for long host names problem
If the fully qualified domain name for your network exceeds 16 characters, it
will be necessary to shorten the host name of all the servers in the Calendar
Server network . These instructions must be carefully followed to avoid causing
problems with the network. Ensure that the procedure is applied to ALL nodes in
the Calendar network.
1) The following procedure should be carried out on each server in the
Calendar network:
a) Bring the Calendar services down.
% unistop -y
b) Run the unidbfix command in export mode.
% unidbfix -export -n node-id
This will create a remotenode.ini file for each node on the server. The file is
located in the node's perm directory.
Example:
If you have two nodes on the server ROCK, node 1(in N1) and node (in N2), the
files are:
/users/unison/db/nodes/N1/perm/remotenode.ini
/users/unison/db/nodes/N2/perm/remotenode.ini
The remotenode.ini file will look something like this:
[1]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni2"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
[2]
RN_NUMCONNECT = 2
RN_SURNAME = "unison"
RN_GIVENNAME = "unison"
RN_ORGUNIT1 = "uni4"
RN_ORGUNIT2 = "openmail"
RN_ORGANIZATION = "ABC Corp"
RN_ACCESSMETHOD = 2
RN_SERVICENAME = "unieng"
RN_HOSTNAME = "rock"
2) Once you have run unidbfix in export mode on all the servers, proceed as
follows:
a) Compare the remotenode.ini files and verify that the entries are the
same. In each file, you will note that an entry for the local node is not
included.
b) Edit one of the files (on any of the servers). This file will be
referred to as the master file. Add the appropriate entries for the
local node (copy the section from one of the other files). Modify the
RN_HOSTNAME in each of the sections of the master file to shorten the
name.
c) Copy the master file in the perm directories of each node on all the
servers.
3) Once the master file is in the perm directory of all the nodes, proceed as
follows on each server:
a) Run the unidbfix command in the -import mode.
% unidbfix -import -n node-id
b) Edit the nodes.ini file on the hub server and make the same changes to
the host names. You do not need to apply the changes.
c) Edit the [UTL] section of the /users/unison/misc/unison.ini file and
change the host name.
d) Start up the services.
% unistart
4) After all the changes have been made, run the uninode -cws all and
uninode -snc all commands and verify that the results are accurate.

See this:
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8203.html
You should then see your pcs listed in Finder's sidebar under the shared section.
Regards

Not able to see requisition line in the PO after autocreation

Hello Friends,
When i am autocreating a purchase requisition onto a purchase order , i am not able to see that line.Though in the header it reflects the line amount but i am not able to see the line.
What could be the problem?
Thanks for all help.
Regards,
Amit

Your problem is not clear.
Which line do you not see? The PO Line or the Req line?
Have you tried saving and requerying the PO? Does the PO line show up?
Sandeep Gandhi

File Monitoring - Not able to see File Path on the Detail Information Tab

Hi Experts:
I am setting up the "File Monitoring" in the Solution Manager. I am having STA/PI01L_CRM570 on the Solution Manager.
And on the Satelite System - ECC I have STA/PI 01L_ECC600
While I am setting up the parameters, I am supposed to provide the file path in "Detail Information" tab page.
But I am just able to see two tabs:
Count and Short Text (optional).
I checked all the other tab but not able to locate where I need to provide the file path.
Can any one let me know, If I am missing anything or do I need to do any further steps.
Similarly for the File Size setting:
I am not able to see where I can define The parameter "File Pattern (e.g. *.log, *.txt or any string)" is mandatory.
Pls let me know.
Regards
John

Hello Johns,
You can find the FilePath in the 'Detail Information' tab if you double click the initial and predefined counter 001.
Best regards,
Goncalo Mouro Vaz

Not able to see useSecurity property in the Managed BPEL Domain page

Hi,
I have installed Oracle BPEL PM 10.1.2.0.2 (Developer version) but i am not able to see the useSecurity property in the page. Are there any settings required before i can see the same.
Thanks,
-Ulrich.

I have posted an entry on my blog describing this
http://clemensblog.blogspot.com/2006/02/bpel-security-changes-between-1012.html
hth clemens

HT2474 I am not able to see my dock on the MacBook v 10.6.8

i am not able to see my dock and also getting error 13014 for itunes?.

If your trying to put pictures that are on your phone to your computer you import it see link below
http://support.apple.com/kb/HT4083

Not Able to see SAP systems in List of Available SAP Systems for Crystal R

Hi All,
We have installed Crystal reports 2008 and SAP integration KIt client software on my machine. I am trying to create Crystal reports based on the BI query and I could see SAP Connections in the 'Create new connections list' but not able to see any SAP systems in the list of 'Available SAP Systems'.
How to Add SAP systems to this list.
Thanks,
Chindam Praveen Kumar.

1. Define an environment variable (user or system) with the name SAPLOGON_INI_FILE . This variable should contain the path to your saplogon.ini file including the file name eg. if the saplogon.ini resides in the folder c:\windows the variable should contain the following value c:\windows\saplogon.ini
2. Open your saplogon.ini file using Notepad and go to File->Save as. Choose All Files in the field Save as type and DO NOT change the name of the file. In the field Encoding make sure that UTF-8 is selected.
ingo

Not able to see GC information in the logs even if verbose:gc is set

Hi,
We have IAS 6.0 SP4.
My iasenv.ksh script is set to :
if [ "$script" = "kjs" ]
then
## Set all User Level JVM flags for KJS here.
SPACE=" "
# set this variable to YES to run SmartHeap enabled kjs
MEMOPT_KJS=YES
## Desired JVM flags. A grab bag of interesting JVM Tuning options:
## -Xoptimize -verbose:gc -Xss512k -Xms128m -Xmx256m -Xgenconfig:32m,32m,se
mispaces:64m,512m,markcompact
## Read the Solaris JDK 1.2.2 FAQ for more information.
JAVA_ARGS="-Xgenconfig:64m,64m,semispaces:64m,128m,markcompact -Xss512k -ve
rbose:gc -Xms128m -Xmx196m"
I tried to change the position of the verbose:gc to different places - still I don't see any GC information logged to KJS.
Am I missing some thing?
Thanks in advance
Sangeeta

Sangeeta,
Just try with <b>"-verbose"</b> option in JAVA_ARGS (no :gc).
Should you require further information, get back.
Thanks visiting our forum,
Rakesh.

Adobe Photoshop Lightroom 3 updates won't work? Also tried DNG converter but will not work either.

Does anyone know how to get the Adobe Photoshop Lightroom 3 to update so you can use it? I can't process raw files with my new Canon SD Mark 3.
It looks like they stopped doing updates.
Next I tried the DNG converter but it was useless. It could not find any of my photos.
SOS - I needed to complete a job with this last night and their site won't help and they finally respond by saying we will get back to you in a few days.

That camera requires at least Lightroom 4.1. There is no update for Lightroom 3 that will support the files from that camera. I'm guessing that you're having the typical problem that new users at the DNG converter encounter. The converter prompts for the *FOLDER*. If you open that folder then the DNG converter will tell you there are no files to convert. Just choose the folder. I know, it's really stupid prompt and method. But it is what it is.

I want to update my Mac from 10.6.8 to Mavericks, but every time it says update unavailable for this computer. How do I check for space available or how much space I have used? Help please, I am new to using Mac computers.

I am a new Mac user and I bought a refrubished Mac that has Mac OS X VERSION 10.6.8. I have been wanting to upgrade to Mavericks, but every time I go to do that a message comes up saying OS X Mavericks cannot be installed on this computer. Is there anyway I can instal it? Better yet how can I look up how much GB of memory I have and the available storage?

1. No, but you might be able to upgrade to Lion. Choose About this Mac from the Apple menu, check that the computer has at least a Core 2 Duo(not Core Duo) CPU, and if so, click here.
2. Check the RAM from the About this Mac window, choose Computer from the Finder's Go menu, control-click the internal drive, and choose Get Info. If the computer has a 32-bit EFI, it can't be upgraded to Mountain Lion or above regardless of the RAM and free drive space.
(111990)

Not able to see elements to design the screen.

I have ECC 6.0 in our company.
I started learning ABAP Webdynpro.
When I opened the screen to design the first screen of my application with the elements like label, input field, button etc...left hand side under favourites, only lines are there instead of icons.
May I know that in any ECC 6.0, we can practice webdynpros.
Can you please say that do I need to do any setting or
the ECC i am using is not given priviliges to pratice webdynpros ?
Thanks in advance.

Hi,
U check the system settings with ur ADMIN.
for system settings,following link would help you.
In the view of Web Dynpro- "Page cannot be displayed screen"
Regards
Sajid

I have Photoshop Lightroom 5 and have downloaded Camera Raw 8.7.1 &DNG converter successfully. I have a new Sony Alpha 7 11 model ILCE-A7M2 that is supported by LR5. I am still not able to see the RAW pictures. The message says preview unavailable for thi

Similar Messages

Maybe you are looking for