I have problem with power button on my iPhone 5, doesn't work.
everything worked and suddenly button stopped working, they say it's a factory defect, bought in America live in Russia, can I put in for free repair to an authorized Apple store?
Your iPhone warranty/support is only valid in the US. Thus, to obtain any service you will have to physically return the phone to the US...you can't mail it directly to Apple. You can send it to a friend/relative, in the US, and they can take it to Apple for you.
You will not receice any authorized service, in Russia, for this phone.
Similar Messages
-
I have problems with activation, after delete mi Iphone from Icloud.
I have problems with activation, after delete mi Iphone from Icloud.
Hello Sikiz 21,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iPhone: Troubleshooting activation issues
http://support.apple.com/kb/TS3424
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
Best of luck,
Mario -
Hi,i have problems with the battery of my iphone 4s
hi,i have problems with the battery of my iphone 4s
Turning of the auto index for events and other unnecessary items ; Switching off auto brightness. - These 2 things really increased the battery life of my iphone 4s with ios7.
-
My sleep/wake button is now not working and than I faced problems with my sound, now my iphone speakers aren't working? What shall I do?
The problem isn't solved after the restore, shall I bring my phone to the AppStore? Will they give me a new one? Or I should pay for that. Warranty is until December 2013;)
-
The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks
The main button of my Iphone 5 doesn't work anymore. do you have a solution? thanks
Get a replacement phone. If it is still covered by warranty it will not cost anything. See: https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
The middle button on my iphone 4 doesn't work properly what can I do about it?
the middle button on my iphone 4 doesn't work properly what can I do about it?
Make an appointment with the genius and bring to the Apple Store.
-
I cant connect with my imessage and facetime in my iphone; i already upload de i os 7.02 but the message still have it; it said that they have problem with the network; i reset the network and doesnt work
Hello, Toro Silva.
Thank you for visiting Apple Support Communities.
The steps in the section labeled Unable to activate FaceTime or iMessage with phone number and Apple ID after waiting 24 hours (iPhone only) of the article below, should help resolve the issue. Make sure to create a current backup prior to processing these steps.
iOS: Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/ts4268
Cheers,
Jason H -
The home button on my iPhone 4 doesn't work
The home button on my iPhone 4 does not work. Any suggestions?
Hi I got two ideas for you, give them a read and let me know how you get on. I used the first about a month ago and not had a problem since This is defo not a software related problem.
http://applecor.info/how-to/a-z/85-iphone-4s-non-responsive-home-button.html
This one is just a work around but still cool to know
http://applecor.info/how-to/a-z/95-assistive-touch-buttons-iphone-gesture.html -
I HAVE I PROBLEM WITH POWER BUTTON
HI.......I had a problem with the power button, with less than 6 months of use, I had to warranty apple here in Brazil, to my surprise they said I would have to refer to the country that I bought in the USA ... and that guarantee that it was said that international.
very frustratingYour iPhone warranty/support is only valid in the US. Thus, to obtain any service you will have to physically return the phone to the US...you can't mail it directly to Apple. You can send it to a friend/relative, in the US, and they can take it to Apple for you.
You will not receice any authorized service, in Russia, for this phone. -
hi, I bought my iphone 5 last year in November. It seem to have some problem with its power button cause it doesn't work when i press it. Its still under warranty but the problem is im not anymore in the country i purchased it from which was UK and now im in Pakistan. Any help as to what my options are now?
Apple doesn't do such repairs only.
The iPhone would be exchanged under warranty by Apple only and that is your ONLY option if you don't want to pay for a 3rd party there to try to repair it.
An iPhone purchased in a EU country can be exchanged under warranty in any other EU country. -
Problems with power button HP dv5
Hello,
I have a HP Pavilion DV5 that warranty was over.
The main problem of this notebook is the power button ( I think ). When I click it, it blinks once the power led ( white color ) and the nothing happens. No screen image, no fan movement. Nothing.
I opened it and I noticed that the link from power button to the motherboard was not in very good status.
So I decided to try with another link cable from another broken laptop. The same thing happens.
Now I'm kinda stuck because I cant start my own laptop. There's any suggestion?
There's a way to "direct turn on" without the power button?
Any help is apreciated.
PS. Sorry for my bad english.Same problem I had,I removed the damaged white ribbon connector, taped the ribbon wires over the wires from the board,so that the end of the ribbon was over the leads, then,tacky as it sounds I cut about a 1/2inch of a cigarette filter and taped it over the area where the leads need to make contact . installed keyboard with its screws to hold down the cig filter tight over the taped down leads. quick fix that workes without soldering on another connection
-
Please help... I HAVE PROBLEM WITH MY BUTTONS OF MY NANO (1st gen)
my nano is freezing, when I restore it, the center button is working only for first time after restoring nano, I can reset it(center button + menu) anytime, after that the buttoms still are not workink. I dont know that do I do... please help me...
Hello
It would be very interesting to know how old is your notebook and the battery.
Did you remove the battery while the notebook was used with power supply?
As far as I know its not optimize for the battery life if it is always attached to the unit. If you used your unit with ac adapter, the battery pack should be always removed from the notebook. Please read in the user manual how to handle the battery.
Bye -
Morning !
We have many problems with PHOTOSHOP ELEMENTS 12 ?
After installation on MAC OS X YOSEMITE .
S O S !!Exporter vers photoshop do you receive any specific error messages? In what way is Photoshop Elements 12 not working?
-
Power button on new macbook pro doesn't work well
So I just got a snazzy new MBP 15inch with retina, my first Apple computer in almost 25years, and it's great so far. I am having a strange issue with the power button. If I'm trying to get the computer to turn on after shutting it down (not just closing the lid or letting the computer go to sleep) I have to tap the power button a bunch of times. I couldn't find anything in the manual that says you have to push anything other than the power button to get the thing to turn on, am I missing some kind of Apple voodoo that I wouldn't know coming from the PC world? Is the physical power button just faulty, or is there a software issue with the power switch? Do I have to hold the button for 3 sec or something to get it to turn on? Hold another button while pressing the power one? I'm extremely savvy with PCs and Windows, having built all of my own computers for close to two decades, but the last Apple (not counting my multiple iPads, iPods, and iPhone) computer I owned was a IIgs back in the 80s.
Also, yes the battery is charged, having same problem with it plugged in.
Message was edited by: Kronos76There is a CLICK to the button. Just Tapping it does not activate it. You have to actually Push it until you hear a CLICK.
If that does not work TAKE IT BACK for full refund and buy another. -
Power button on brand new iMac doesn't work properly?
Hello,
I am having problems with the power button on my brand new iMac which was purchased 2 weeks ago. Some days I press the power button and everything works fine. And then some days, I get no response from the power button. I then just unplug and replug the power cord from the surge protector back in and then the power button works!
I also shut down every night - I don't put the computer to sleep.
Can someone tell me what is going on? I've searched these message boards and see old post from others out there have also dealt with problem.
Any advice or insight would be most helpful! Thanking you in advance.A couple of things first your machine has a 1 year warranty and is covered by 90 days of complimentary AppleCare. You should contact AppleCare to get the machine fixed.
Next please carefully read your owners manual, below is what Apple specifys,
"If you'll be away from your iMac for less than a few days, put it to sleep. When your iMac is in sleep, its screen is dark. You can quickly wake your iMac and bypass the startup process."
Personally I only let the monitor sleep, my system has been running like this for 4 years and is the most reliable computer I've ever owned.
Maybe you are looking for
-
Cannot restart using 4 RAM Modules on 655 Max HT Ready (MS-6730)
When I use four 512MB RAM modules, my computer starts up and works fine. The only problem is, that I can't restart the it (D-LED boot-error: Memory Failure). To make it run again i have to turn it off and unplug the power cable. When there are only t
-
How to color a text(font) in GRID?
hii..can i color a <b>tex</b>t(not cell using slis_layout_alv-info_fieldname) in GRID display..if so please give me an idea or sample code... thanks in advance..
-
Create service Purchase Order automatically at goods issue in VL02N.
Hi Friends, Please give me steps on how to write the ABAP code To Create service PO automatically at goods issue. Technical Info BAPI BAPI_PO_CREATE1 is to be used for creating the service PO. The service PO will be only created for YLF
-
Exception handling in an RFC server
Hi, I've an RFC server coded in vb.net. Am trying to capture the exceptions raised by the server in an ABAP program. But it is giving a short dump. Can any one tell me the reason for this? Regards, Aravinda Sarma M. The following is the code:
-
N8 Belle Refresh email stuck in Outbox
Hello I have an N8 running Belle Refresh (updated a month ago). I've had an email stuck in the Outbox for over a week. I only found it by accident. I can't move it or open it, it just says "Unable to open while sending". It seems all I can do is de