I have problem with wireless print HP after iOS 7 !? What can i do

I have problem with wireless print HP after iOS 7 !? What can i do?!

Tap Settings / General / Reset / Reset Network Settings if your having a problem with your network. If you have another problem go to the same place in "Reset" and just reset all settings

Similar Messages

TS1398 I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I have problems with my wifi connection after update the ios6 any advice

I have problems with my wifi connection after update the ios6 any advice

Ask your question in an iPAD forum.
This is the OS X Mountain Lion forum.

TS3694 i have problem with my iphone 3g. after restoring, theres an error occured in 1015,somebody help me what to do?

hi
i have problem with my iphone 3g, after the recovery in itnes, theres an erroroccuredin 1015, what will i do next to resolve this problem?

Google "Error 1015". You will find your solution.

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart

I have problems with my printer says the ink system failure error 0xc18a0206 what do I have new cart. Printer is Hp Photosmart c5180

This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

I have problem with the mic....sometimes others can hear me and other times not at all

i have problem with the mic....sometimes others can hear me and other times not at all

can anybody provide me with the solution

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

Windows 7 detects problem with iPod shuffle and after troubleshooting say it can't fix and disconnects it. What's up?

You might get some help over on the shuffle discussions.
http://discussions.apple.com/forum.jspa?forumID=822

I have problem with my macbook pro after installing lion

i have problem with macbook,after i install mountain lion its totaly go bad,its start to stack,get wery wery slow( i have macbook pro with i7 procesor) and its works like computer 20 years back.what shud i do? can i uninstall lion?? i want that my macbook be the same like before.pleas help me!

You can do some basic diagnostics, first open Disk Utility and Repair Disk Permissions. If that does not help I woudl think you got a corrupt download of ML and need to re-download from the Mac App Store and reinstall. Hopefully you have been backing up and have a stable backup system.

Connection problems with wireless printer

Unable to connect my hp officejet wireless printer to my computer now.

What is your Cisco / Linksys home device? What steps have you undertaken to troubleshoot the issue? What errors have you encountered?
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

Problems with wireless mouse/keyboard after upgrade to snow leopard

Hi!
I am wondering if someone has some insight for me. I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years. I am now having problems with them irratically.
1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left. This does not happen in Word.
2. When in boxes with dropdown options, only occasionally does that happen. The dropdown either doesn't show, or it flashes quickly. Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
3. When I use my function key or mouse to display all windows, I can't choose the one I want. Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
5. For a while, my left mouse button wouldn't work. I reconfigured it, that seems to have done the trick.
6. Today, I can't open any of the menu items on Firefox. I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded. Thanks in advance for any help!
Donna

Update all your third party software or uninstall and reinstall 10.6 versions.
If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
http://roaringapps.com/apps:table
IMO save for a new 10.8 machine after this summer.
See #1-15 here, tune yourself up good.
 Step by Step to fix your Mac

Problem with wireless printer HP photosmart by using iPad

How can I use my wireless printer HP photosmart D 7460 with my iPad?
jacques

I don't see your printer on the list of AirPrint capable printers: http://support.apple.com/kb/ht4356. If it isn't AirPrint capapble, the options are as follows:
HP may have an app in the App store that will allow your printer to have limited capabilities (not AirPrint).
One or more of the 3rd party printer apps in the Apps Store may work with your printer (again not AirPrint).
Download a 3rd party program to your PC/MAC that will allow you to use shared printers as if they were AirPrint capable. Your iPad will see the printer as an AirPrint cabable printer, but the PC/MAC the software is installed on must be up and running. A few such programs are Printopia, AirPrint Activator, FingerPrint by Collobos.

HT6030 Do you still have problems with Mail in Maverick after the Mail update 1.0

After the Mail Update 1.0 in Maverick I stil had problems with my passwords and with syncing my mail acoounts (google, icloud and my provider), Finally I removed Avast Antivirus and ..... all my problems are gone. Everything is working fine now. Avast is incompatible with Apple's new mail client!!!

Hello is anyone from Adobe out there? Is anyone from Adobe monitoring the forum? The 1.6 update has stopped the app from crashing when you were trying the sync function to the creative cloud.
However, the sync function is not working as it did in the past. If you make a change in an already existing file in the Photoshop touch app and save it, the sync to the creative cloud results in an explanation point instead of a check to the left of the filename. Toggling the sync button on and off doesn't change the exclamation point to a check. The blue line goes across the file as it normally would when syncing but the explanation point remains. As a result, the changed file is not being synced with the creative cloud.
I am not sure of the exact amount of time it takes, I am guessing about 24 hours. After about 24 hours when you do a sync, the file that had the explanation point to the left of it does change to a checkmark. However, you now have two files. One that reflects the change and has the word conflicted now added to the file name. As well as a file with the same name that doesn't reflect the change and no conflicted added to its file name.
For me at least the sync function no longer causes the Photoshop touch app to crash. However, the 1.6 update also doesn't sync properly to the creative cloud.
Making a change to a file in the Photoshop touch app and trying to sync it shouldn't result in the file not being synced or in a conflicted file. Could someone please help me in regard to this issue.

After upgrading to 8.0 I have difficulties with connecting to wi fi;any suggestions what can be the problem?

After upgrading to the new 8.0 I have difficulties with connection to wi fi.
Any suggestions to what I need to do ?
Paul

Hello there, Paul.
The following Knowledge Base article offers up some great in-depth steps for troubleshooting Wi-Fi connectivity on your iOS device:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

I have problems with pci-gpib card under windows me, What I need to know what to do in order to fix this problems?

Hi, I have installed a pci-gpib card in my computer, I have a problem with
installation, the message of troubleshooting wizard is as follow:
"One or more missing GPIB interfaces.
There are several reasons why you might encounter this problem:
Reason: Your GPIB interface is incorrectly installed.
Solution: Please verify that your GPIB interface is correctly installed
and rerun the NI-488.2 Troubleshooting Wizard.
Reason: You are using a non-Plug-and-Play interface (e.g., AT-GPIB/TNT,
GPIB-PCII/IIA, GPIB-ENET) and you did not use the Add New Hardware Wizard
to add the interface to your system properly.
Solution: Click th
e Add Hardware button and the Add GPIB Hardware wizard
will guide you through the process of adding GPIB hardware.
Reason: For the GPIB-USB and GPIB-1394, the host controller (USB or 1394)
must be working properly in order to use the GPIB interface.
Solution: Click on the System Details button for details about the USB and
1394 host controllers.
Reason: For the PCMCIA-GPIB and PCMCIA-GPIB+, the PCMCIA host controller
must be working properly in order to use the GPIB interface.
Solution: Use the Windows Device Manager to verify that your PCMCIA host
controller is functioning correctly. Start the control panel by selecting
"Start>>Settings>>Control Panel", open the System icon and select the
Device Manager page. If you select "View devices by type", you can look at
the PCMCIA socket properties to ensure it is correctly enabled."
And on system details the message is the next:
"USB Driver type: USB universal host controller"
"This version of windows does not su
pport IEEE 1394."
I am using Windows Me, so i want to know what i need to do to fix this
problems.
Best regards.

If you have a PCI-GPIB card, you needn't worry about the USB port or whether or not Windows ME supports 1394. All you need in NI-488.2 version 1.70 from National Instruments. Install this driver and then insert your card. Windows should detect the card and find the proper driver.
If this did not happen in the proper sequence, look in the device manager and see if the card was installed as an "other device". If this happens, remove the card in the device manager and have windows redetect it. If this is not a solution, you may consider the ask an engineer page at www.ni.com/ask. Provide as many details as possible.

Serious problems with iPhone 5 camera after iOS 7.0.3 upgrade

Problem with the camera or its related application: sometime freezes, showing the image field all black or blurry and it does not respond to any command, or purple bands appear (I am not referring to the effect of "lens flare", but to big purple stripes that cover part of the image!).

Similar problem here. The camera can focus on macro but nothing else. The camera is almost useless now. I made an appointment with Apple, brought my phone in and they said they can't do anything about the camera. They said I'd have to get a new phone. That's rediculous!!

I have problem with wireless print HP after iOS 7 !? What can i do

Similar Messages

Maybe you are looking for