I have problems with creating new projects in iMovie.
I have problems with creating new projects. When i try, the mac says the following "Make sure there is enough disk space and that you have permission to write the projects to the drive." I have 8GB available, so its not that.
thanks for your support
lol
Similar Messages
-
Problem with creating new user in portal = portlet is not visible
Hi,
I've got a problem with creating new users in portal. In the Administer tab of the builder is the user portlet not visible.
How can I make this portlet visible?
Please Help
thank you...
GilbertHi..my problem slightly similar.
I created one new user, and didn't select anything from "Public Groups Assignment" and "Privilege Assignment" for him.
I expect the user will be a public user.
But, when he try to logged in the portal,
He cannot see all the PORTLETS related to database values..
All he can see just LINKS -that all in my portal right now beside the report from database that the user cannot see :)
So, what did i do wrong?
Plz Advise, and thanks. -
Does anyone else have problems with the new macbook pro trackpad?
I exchanged my new macbook pro last week because there was a major trackpad lag. Every time I put it to sleep and woke it up, the trackpad would delay 5 or more seconds. I took it in to the Apple store and they said it could be a software issue and I exchanged it. However, I just opened up this one up from the package today, and there's still a lag. Does anyone else have problems with that? I don't want to exchange it again, so is there something I can do?
Also, is it mandatory to run software updates when you first turn on your computer?
-
Problems with creating new WinHelp 2000 projects (RoboHELP 7)
We changed to RoboHELP 7 one week ago. Before we used
RoboHELP X5. On the Computer where I installed RH7 the demo of RH7
was installed before. It is a Windows Vista sytem. But after
encountering problems I set up a VM Ware (Windows XP SP 2). The
problems remained the same.
Editing our old X5 projects is no problem. But when creating
a new project it is impossible to set a non-scrolling region. I
figured out that the paragraph mark for setting up a non-scrolling
region in RH5 is right before a pagebreak in the word documents
(Topics 2 to X). In RH7 it is place directly in front of Heading 1.
By creating a new document in the project and deleting the default
document you can work on as normal. Editing the DOCX template works
fine either. But from my point of view this cannot be the final
conclusion.
The second problem is that changes in the help window
configuration oviously are stored but not compiled anymore. You can
change color and dimension of your main help window and these
changes are stored correctly. But when compiling the project there
are no changes to the default values in the output. More worse:
when you open the HPJ file directly with Microsoft Help Workshop
application there are written some strange marks (like
“”) into the first lines and the help
file cannot be compiled by Help Workshop application anymore. The
error message sounds like this: HC3073: Warning: hhtrace.hpj: No
section is defined for the line ".".
Anyone out there who encountered the same problems and solved
them?Thank you for your replies! :)
By reading your answers I became aware of another fact: we
use a german version of RoboHelp 7 on german or multi language
versions of Windows. I set up a VM in English this morning (US
version of WinXP SP 2, US version of Office 2007, English RoboHelp
7 Demo). Indeed I had NO Problems. So it may be an issue of the
german version of RH7.
Of course I know how to set a non scrolling region manually
for a topic. But the result remains the same (for the german
version of RH7). Creating a new project you face the default
document. Now I was adding some topics (in the following linked
screenshot ‘Topic 1’ and ‘Topic 2’). If you
now add non scrolling regions to all the topics (manually or
automatically), the result will be as follows:
http://img223.imageshack.us/my.php?image=nsr01gg6.gif
After compiling the first topic in the document will have a
non scrolling region, the others won’t. As I said in my first
post, the problem only occurs in the default document. Creating a
new document the topics with non scrolling regions look like this
and compile correctly:
http://img220.imageshack.us/my.php?image=nsr02fm5.gif -
STRANGE PROBLEM with "Create New Mail Account.scpt" when creating POP acct.
I am using "Create New Mail Account.scpt" to create a POP account. It creates the account successfully. It fetches the mails successfully. Now the problem begins. After fetching all the mails once if u click "Get Mail" in mac mail, it fetches all the emails again and has now 1 original and 1 copy of the email set which is on the server. I just need 1 copy of the mail set not multiple. Please give me a solution or direct me to a help.
Thanks
SCRIPT
global theUsername
global thePassword
set success to 1
set theResult to true
if theResult is not equal to false
#set theAccountName to getAccountName()
#set theUsername to getUsername()
#set thePassword to getPassword()
#set theEmailAddresses to getEmailAddress()
#set theFullName to getFullName()
-- POP Account
if accountTypeString is equal to "POP" or accountTypeString is equal to "IMAP" then
set theHostname to "THE HOST NAME"
-- POP specific options
if accountTypeString is equal to "POP" then
set deletionPolicy to my getDeletionPolicy()
if deletionPolicy is not equal to false then
set deletionPolicy to item 1 of deletionPolicy
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
setDeletionPolicy(theNewAccount, deletionPolicy)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
-- IMAP specific options
else if accountTypeString is equal to "IMAP" then
set theNewAccount to my createAccount(accountTypeString, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
if theNewAccount is not equal to false then
getAndSetCachingSettings(theNewAccount)
getAndSetAuthenticationScheme(accountTypeString, theNewAccount)
getAndSetSMTPServer(theNewAccount)
else
set success to 0
end if
end if
end if
if success is equal to 1 then
display dialog "Account created!"
else
display dialog "Account creation failed!"
end if
end if
-- Convenience handler for creating accounts
on createAccount(theAccountType, theAccountName, theUsername, theHostname, thePassword, theEmailAddresses, theFullName)
tell application "Mail"
try
if theAccountType is equal to ".Mac" then
set theNewAccount to make new Mac account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "IMAP" then
set theNewAccount to make new imap account with properties {name:theAccountName, user name:theUsername, server name:theHostname, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
else if theAccountType is equal to "POP" then
set theNewAccount to make new pop account with properties {name:theAccountName, user name:theUsername, server name:theHostname, include when getting new mail:true, password:thePassword, uses ssl:true, full name:theFullName, email addresses:{theEmailAddresses}}
end if
on error
set theNewAccount to false
end try
end tell
return theNewAccount
end createAccount
-- Ask the user what they would like to name the account
on getAccountName()
repeat
set theResult to display dialog "What would you like this account to be named?" default answer "Example: My Home Account"
set theAccountName to text returned of theResult
if theAccountName does not start with "Example:" then
exit repeat
end if
end repeat
return theAccountName
end getAccountName
-- Ask the user for the user name for their email account
on getUsername()
repeat
set theResult to display dialog "What is your email user name?" default answer "Example: janedoe"
set theUsername to text returned of the theResult
if theUsername does not start with "Example:" then
exit repeat
end if
end repeat
return theUsername
end getUsername
-- Ask the user for the password for their email account
on getPassword()
set theResult to display dialog "What is the password for this account?" default answer ""
set thePassword to text returned of theResult
return thePassword
end getPassword
-- Ask the user for the email addresses for their email account
on getEmailAddress()
repeat
set theResult to display dialog "What email address would you like to use for this account?" default answer "Example: [email protected]"
set theEmailAddress to text returned of theResult
if theEmailAddress does not start with "Example:" then
exit repeat
end if
end repeat
return theEmailAddress
end getEmailAddress
-- Ask the user for the full name for their email account
on getFullName()
repeat
set theResult to display dialog "What is the full name for this account?" default answer "Example: Steve Smith"
set theFullName to text returned of theResult
if (theFullName does not start with "Example:") then
exit repeat
end if
end repeat
return theFullName
end getFullName
-- Convenience handler for asking the user what settings they would
-- like to have for their special mailboxes. This handler also sets these
-- values in Mail.
on getAndSetSpecialMailboxes(theAccount)
-- Sent messages default to storing locally
set theResult to display dialog "Would you like to store Sent Messages on the IMAP server?" buttons {"Yes", "No"} default button 2
log theAccount
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store sent messages on server to true
else if button returned of theResult is equal to "No" then
set store sent messages on server to false
end if
end tell
end tell
-- Drafts default to storing locally
set theResult to display dialog "Would you like to store Drafts on the IMAP server?" buttons {"Yes", "No"} default button 2
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store drafts on server to true
else if button returned of theResult is equal to "No" then
set store drafts on server to false
end if
end tell
end tell
-- Trash defaults to storing on the IMAP server
set theResult to display dialog "Would you like to store Deleted Messages on the IMAP server?" buttons {"Yes", "No"} default button 1
tell application "Mail"
tell theAccount
if button returned of theResult is equal to "Yes" then
set store deleted messages on server to true
else if button returned of theResult is equal to "No" then
set store deleted messages on server to false
end if
end tell
end tell
end getAndSetSpecialMailboxes
-- Convenience handler for asking the user what IMAP
-- caching setting they would like to use and configuring
-- it in Mail.
on getAndSetCachingSettings(theAccount)
set theResult to choose from list {"Cache everything", "Cache everything but attachments", "Cache when read", "Don't cache"} ¬
with prompt "Choose a message caching setting for this account:" default items {"Cache everything"} without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
tell theAccount
if (item 1 of theResult is equal to "Cache everything") then
set message caching to all messages and their attachments
else if (item 1 of theResult is equal to "Cache everything but attachments") then
set message caching to all messages but omit attachments
else if (item 1 of theResult is equal to "Cache when read") then
set message caching to only messages I have read
else if (item 1 of theResult is equal to "Don't cache") then
set message caching to do not keep copies of any messages
end if
end tell
end tell
end if
end getAndSetCachingSettings
-- Convenience handler for asking the user whether they want to use
-- an already defined SMTP server (if any) or whether they want to
-- define a new one.
on getAndSetSMTPServer(theAccount)
tell application "Mail" to set everySMTPServer to every smtp server
if ((count of everySMTPServer) > 0) then
set listOfSMTPServers to {}
repeat with eachServer in everySMTPServer
try
set listOfSMTPServers to listOfSMTPServers & name of eachServer
end try
end repeat
createNewSMTPServer(theAccount)
else
createNewSMTPServer(theAccount)
end if
end getAndSetSMTPServer
-- Handler for creating a new SMTP server, if the user has none set up
-- already or if they choose not to use one of their existing servers.
on createNewSMTPServer(theAccount)
set theServerName to "THE SERVER NAME"
tell application "Mail"
set theSMTPServer to make new smtp server with properties {server name:theServerName, port:25, uses ssl:true}
set smtp server of theAccount to theSMTPServer
end tell
getAndSetAuthenticationScheme("SMTP", theSMTPServer)
end createNewSMTPServer
-- Handler for asking the user what authentication scheme their server supports.
-- The options are different for POP, IMAP, and SMTP. Unless you are told otherwise,
-- it's best to leave these at their default settings.
on getAndSetAuthenticationScheme(accountType, theAccount)
if accountType is equal to "POP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "KPOP", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "IMAP" then
set theChoices to {"Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
else if accountType is equal to "SMTP" then
set theChoices to {"None", "Password", "Kerberos 4", "Kerberos 5", "MD5"}
set theDefault to {"Password"}
end if
set theResult to choose from list theChoices ¬
with prompt ¬
"Choose an authentication scheme for this " & accountType & " server. Most servers support 'Password' authentication." default items theDefault without multiple selections allowed
if theResult is not equal to false then
tell application "Mail"
set theScheme to item 1 of theResult
tell theAccount
if theScheme is equal to "Password" then
set authentication to password
else if theScheme is equal to "Kerberos 4" then
set authentication to «constant exutaxk4»
else if theScheme is equal to "Kerberos 5" then
set authentication to kerberos 5
else if theScheme is equal to "MD5" then
set authentication to md5
else if theScheme is equal to "None" then
set authentication to none
else if theScheme is equal to "KPOP" then
set authentication to «constant exutakpo»
end if
end tell
end tell
if accountType is equal to "SMTP" then
set theSMTPLogin to theUsername
set theSMTPPassword to thePassword
tell application "Mail"
tell theAccount
set user name to theSMTPLogin
set password to theSMTPPassword
set uses ssl to true
set port to 25
end tell
end tell
end if
end if
end getAndSetAuthenticationScheme
-- Handler for asking the user what POP deletion policy
-- they would like to use for their account.
on getDeletionPolicy()
set theResult to choose from list {"Immediately after being downloaded", "After a specified number of days", ¬
"When I remove them from the inbox", "Always leave them on the server"} ¬
with prompt ¬
"Choose a POP message deletion option:" default items {"Always leave them on the server"} without multiple selections allowed
return theResult
end getDeletionPolicy
-- Handler for setting the deletion policy established in getDeletionPolicy()
on setDeletionPolicy(theAccount, thePolicy)
tell application "Mail"
tell theAccount
if thePolicy is equal to "Immediately after being downloaded" then
set delete mail on server to true
set delayed message deletion interval to 0
else if thePolicy is equal to "After a specified number of days" then
set numberOfDays to my getDeletionInterval()
set delete mail on server to true
set delayed message deletion interval to numberOfDays
else if thePolicy is equal to "When I remove them from the inbox" then
set delete mail on server to true
set delete messages when moved from inbox to true
else if thePolicy is equal to "Always leave them on the server" then
set delete mail on server to false
end if
end tell
end tell
end setDeletionPolicy
-- Handler for asking the user what deletion interval they
-- would like to use, if they are setting up a POP account
on getDeletionInterval()
set theResult to display dialog "After how many days would you like POP messages to be deleted from the server?" default answer "30"
set numberOfDays to text returned of theResult as integer
return numberOfDays
end getDeletionIntervalHi amiaba, and a warm welcome to the forums!
I can't quite tell what it's doing, but open Keychain Access in Applications>Utilities, click on your Keychain on the left, put .mac in the search bar, once you find it, double click on it and click show password.
If you have no mail in there try this with Mail quit.
Drag this file to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.mail.plist
Start Mail & see if it steps you through it.
Not sure on the .uk thing, but is Date & Time>Time Zone set to the UK? -
Issue With Creating New Projects
Hi there,
I've been using PP for a long time with no problems. However, I've been using a single project (and multiple sequences within it). I recently tried making a new project with different settings - upon watching the video exported from this, it freezes (In Quicktime, VLC and even when uploaded to video sites such as Youtube and Vimeo).
So, this was a disappointment after I'd worked on a project for a while - I tried making new projects, even with the same settings as my single project that does work, and found the exact same - the video exported freezes a few seconds in.
Is this a problem many have come across? I have an issue in that I have no way of re-accessing registration details - this account was simply made for a trial download. If there are any solutions that do not involve reinstallation, I'd love to hear them.Try this: http://blogs.adobe.com/genesisproject/2009/11/having_weird_behavior_with_an.html
Other than that, I think you'd need to provide more information about the media used, the system used and what you're trying to accomplish.
Dennis -
I have Problem with my new macbook with Retina display
my new macbook with Retina display i have Problems
(Suddenly Stuck) stop working don't thing move even mouse even caps lock light in keyboard it not work it is totally Stuck till shutdown it from keyboard and restartHmm sounds like a saved application state issue and memory related.. I hate to ask are these graphic intensive apps. ?? games ??
Try these two things and restart if it still occurs then i recommend contacting AppleCare
disable the Resume and App Restore feature completely in Mac OS X 10.7.
Launch System Preferences and click on the “General” icon
At the bottom of the “Number of recent items” list, uncheck the checkbox next to “Restore windows when quitting and re-opening apps”
- Click on the Apple on the top left. Choose shutdown "Uncheck" Reopen windows when logging back in
**use your mac normally just like you were if the issue reoccurs then contact AppleCare.. Enjoy.. -
Problem with "Create New Extrusion from Selected Layer" CC 2014
Hello, I'm experienced with Photoshop but am new to 3D text in Photoshop. I type in some text and convert to a shape. When I choose Create New Extrusion from Selected Layer I get dialog box I don't see in any tutorials. It says "You are about to create a 3D layer. Would you like to switch to the 3D workspace? Yes/No, Don't show again." Which should I use for 3D text?
If I choose Yes, all the panels go away and the content in the tool options bar (ribbon?) just under the menu bar go away. I have to restart Photoshop to get the tool options back. What could I be doing wrong?
Thanks - DaveI just chose "No" and didn't look back. I like my workspace just as it is, and don't prefer Photoshop to change it for me under this particular case.
You can make the 3D panel visible yourself via Window - 3D. I find it's a good alternate for the Actions panel, as I don't have any actions at the moment that work in the 3D world.
The panels you'll want to see easily if you work on 3D are the 3D panel and the Properties panel, among a few others.
Regarding getting your workspace back the way you like it... Note the little selector near the upper-right corner of the Photoshop main window. That can be used to select a workspace. I suggest you experiment and get familiar with the concept of workspaces. You can define your own and save it with a name, and that truly can be helpful.
-Noel -
Alter updating my IPad, I have problems getting new apps. After filling in my Apple Id, and answer my 3secret questions, I get THE answer that this session had to be ended without results.
Wow ! I got it running again ! :-)
I called support and got helped by a very friendly guy:
We tried serveral things, what worked for me was to reset my cookies:
- Close all apps by doubleclicking the "home" button - you see all running apps in the lower part of the screen. Then click an hold the first icon until it starts "shaking". Klick the small minus, proceed like that until the row is empty.
- Go in to the control center (don't know what it's called in english, in swedish it's "Inställningar")
- Klick the tab "Safari"
- Klick on Clear cookies and data ("rensa cookies och data")
- Close the control center and start App store
If you now try to download an app you still get the request for the three safety-questions, but when filling them in it works and you can proceed after that. The questions will not turn upp again afterwards...
Good Luck !
Other things we tried was:
- disconnecting the wifi and restarting it
- log out from app-store (in control center, tab "itunes and appstore") -
Solman_project - problem in creating new Project
Hi everybody,
i want to create a new implementation project in SOlution manager to upload my Blue print in the system.so i am creatng new project using SOLMAN_PROJECT. in order to create Project IMG from solution managar, i selected the project name under System landscape-->img project, i was asked to "create a transport request for the IMG project immediately?". i gave yes but i get this meassage
"S:The ABAP/4 Open SQL:000 y insert results in duplicate database records. records in the data base"
please help me in resolving the issue
ergards,
siva kumarcheck project name is uniqe or already used on setellite servers.
Thanks
Gyan -
Newbie advice needed re: creating new project on iMovie
I have tested the iMovie with some test video. I only used part of it and am impressed and may want to input the rest of it later on. In the meantime I want to create a new project of an old video I did in Alaska. I set up the new project but find that I still have the video clips of my old project in the lower area, where I expect the Alaska clips to go, before dragging into the work area.
How can I get rid of the old clips? Do I just trash them, if I do it says that I will not be able to play the video again! I am confused, can someone please advise me what I should be doing, so That I have a clear area for my new project?A project only organizes information, it does not store the actual data for that project. The clips for that project are in the events area. If you make a project by dragging event clips into the project window, and then trash the event clips, you will not have a movie anymore.
If once you make a project and need to free up the harddrive space from the events (say you use only a % of the events in your project) you have options. Or you could export your project to various media and eg save the movie as a QuickTime movie, and then trash the video. but once you toss that video you will not have access to it again in iMovie. Or you could save the events on an external HD, but tis has to be done a certain way for iMovie to access it. Sound like this "old video" is on tape? if so you just keep the tape and you dont necesarily need to keep the event files. BUT dont toss them until you have made an actual movie out of your project.
post back with questions
roger -
Problem with CREATING NEW DATABASE
Please help...
When i am creating a new database by using DBCA, i got the error like this " *Cannot create directory"C:\oracle\product\10.2.0\db_2\cfgtoollogs\dbca\COLLEGE* ".
Edited by: D.S.Reddy on Aug 4, 2012 5:34 PMPl post OS and database versions, along with the last 100 lines from the dbca log file. Does this directory exist ? Are you using an account with administrator privileges ?
HTH
Srini -
Problems with Creating New Users after migration to EOP
My company uses EOP only for spam email protection as we have an on premise Exchange 2010 server. The issue I am having is after I manually create a new user through the Office 365 Admin Center they do not show up as a user in the Exchange Admin Center
part of EOP. Please let me know if any additional information is needed.Hi,
Thank you for your post here.
Please firstly double check your configuration as the follow article.
http://technet.microsoft.com/en-us/library/office-365-user-account-management.aspx
Best Regards
Quan Gu -
Having problems with creating new webapplication,
hi all,
i created an exploded new webapplications by creating a folder called mywebapp
under config/examples/applications/
and i tried to access this one http://host:port/mywebapp
but it says 404 error, so i guess i hv done something wrong, cananyone just help
me out in this issue,
thanks in advance
Sanhttp://host:port/myWebapp should try to display the welcome-file if there is one
defined in the web.xml otherwise it defaults to index.html
If your welcome-file is logon.jsp but if you don't have this in your webapp root,
WLS returns 404 (doc not found) error. Do you have logon.jsp in your
doc root?
san wrote:
hi,
i created one (index.html) and moreover i hv a welcome -file a logon jsp file,
still iam not getting it,
accutally how do i access this webapplication from browser,
i did http://host:port/myWebapp
is it right?
Kumar Allamraju <[email protected]> wrote:
Do you have "index.html" in config/examples/applications/mywebapp
or else define a weblogic file list in web.xml?
Kumar
san wrote:
hi all,
i created an exploded new webapplications by creating a foldercalled mywebapp
under config/examples/applications/
and i tried to access this one http://host:port/mywebapp
but it says 404 error, so i guess i hv done something wrong, cananyonejust help
me out in this issue,
thanks in advance
San -
Problem with creating new view and binding it wht existing ViewSet/viewArea
Hi All,
I created a new view.
Now I am trying to dynamically change the veiw in ViewArea : product of ViewSet : BupaMainViewSet .
I added my new view in the views for viewarea : "product".
Now I wanted to get this new view based on some button clicks on view BupaSearchB2B.
If search Account button is clicked my new View has to appeared. Othewise the standard view in the Product view area shud appear.
I dont know how to do.
Your response will be highly appreciated with your reward points.
kindly assist me on this.
Thanks,
SR.Hi,
You can find detailed information at the following link:
<a href="https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf">https://portal.wdf.sap.corphttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/go/km/docs/corporate_portal/ws%20service%20%26%20support/product%20support/workspace_public/product%20support%20knowledge%20base/crm/crm-ic/crm-ic/icwc_cbk_crm50_290306.pdf</a>
Please reward points if helpful
Best regards
Reyes
Maybe you are looking for
-
Can i buy an iphone or ipod with a credit money from alot of gift cards?
Can i buy an iphone or ipod without a credit card because i have money as credit in my apple account from gift cards so i wonder if i can buy anything beside apps,music....etc ?
-
PDF reports generation problem from single oracle reports in 10G
Hi All, i am generating 4 PDF reports from one Oracle reports in 10 G. i used RUN_REPORT_OBJECT built in 4 times with some different parameter list at a single time. some time it generates but some time it generate 2 or 3 out of 4. Can you anyone hel
-
G5 to use as file server?
I have an old G5 1.8DP that I want to set up in the office as a file server. I also have a Netgear ReadyNas box that I use as for RAID storage for my archive, plugged into my LAN via a Netgear gigabit switch. Problem is that the ReadyNas has permissi
-
Ical date in dock no longer updating
Ever since aug 1st the ical icon in dock isn't showing the current date. Its nothing major but it was the cool part about the new version in leopard. how can I fix this? I've looked for something in preferences but I don't see anything. What can I do
-
Hi there, I'm using the Multisim 13.0.1. There's a 8-pin mosfet driver NCP5355D available in the library. I wanted to use it for switching half-bridge MOSFETs, but a simulation error has occured. The report said that 'Transient time point calculation