I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.
I have purchased a new mac book pro and I'm trying to install CS6 from old mac. I have installed cs6 upgrade but, software is asking for cs4 number which is not being accepted.
I should add that it's an HP photosmart 4280.I found it online and it shows the Mac 0SX operating system.
Similar Messages
-
I just purchased a Macbook pro laptop. I want to be able to backup and restore as I did in windows with Acronis. In Acronis I take an image of the hard drive, I can then wipe it clean, (format, Dban, etc) and boot off the acronis boot cd, go to my backup and crestore it. After the restore Windows comes up and everything from my pc before I wiped it is now there again, no reinstalling or configuring anything. And it takes about 10 mins or less.
I am looking for a package that will do the same for the MacBook. Any suggestions please?
Thank youThere is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that. -
Can anyone help please? daughter in panic. Has new Mac Pro - decided to put all her old mac on new pro via back up disk - result old mac - can she reset somehow?
Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?
Just brought a new Mac Book Pro and wondered how to move my apps from the iPad to this?
iPad apps will not run on a Mac.
iPads use the iOS operating system. Macs use the OS X operating system. Apps for one won't run on the other.
The most that you can do is store the content on your iPad in the content libraries of iTunes for Mac. You can play the music, movies, TV shows, and podcasts from the iPad using iTunes on the Mac. As well as, read iBooks from the iPad in iBooks for Mac.
http://manuals.info.apple.com/MANUALS/1000/MA1595/en_US/ipad_user_guide.pdf -
I recently purchase my first Mac Book Pro. I copied all my Word documents from my old PC to a USB flash drive with the intention of downloading the content into my new computer. I installed Word for Mac previously. I can not figure out how to download the content of the flash drive into the Mac. Probably very simple but obviously I am a new user. Any suggestions?
Drag them from the drive to the Documents item in the Finder's sidebar.
(60701) -
I have a Mac Book Pro with 10.7.5 and I am trying to upgrade to the free Mavericks but when I click on the download it doesn't do anything. What am I dong wrong?
A couple things to try.
1) Quit the App Store, wait a few minutes, then open it and check the Purchases tab. Is there a progress bar.
2) Boot into Safe Mode and try to download it: http://support.apple.com/kb/HT1564 -
How do I install on a 2nd laptop?
I'm having a similar problem, I have a creative cloud membership for six more months, my computer was set back to factory settings, and I am not seeing my purchases when logged into my adobe id just the free trial options.
The above advice was not helpful because it is not that there is an error with the program it is not being able to find the programs I purchased. -
I start my mac book pro and the screen goes white with an apple in the middle
I start my mac book pro and the screen goes white with an apple in the middle. Starts like charging but then it turns
off againReinstall Snow Leopard without erasing the drive
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install Mac OS X 10.6.8 Update Combo v1.1.
Reinstalling Lion/Mountain Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion/Mountain Lion: Select Reinstall Lion/Mountain Lion and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless. -
I have a new mac book pro and and older MAC desktop. Both are backing up to my time capsule but it is close to full (1TB). If I purchase a new time capsule (2TB) can I bridge them or access both and back up to it still from both computers? If so how do I do this? Thanks in advance.
If you add another Time Capsule, you can have one or both Macs backup to that new device.
However, please note that it is not possible to have backups "carry over" seamlessly from one Time Capsule to another.
If you add a new Time Capsule, each Mac that is backing up to the new device will make a new complete backup and then backup incrementally after the master backup is completed. -
I have updated my mac book pro and am trying to get icloud and the new lion version. The lion version will not download and my biggest problem is finding icloud on my system preference. Can anyone help me?
Welcome to the Apple Support Communities
Connecting your MacBook Pro and your MacBook Air will be the fastest way, but you have to spend money on cables and adapters (also, your MacBook Pro doesn't support Thunderbolt).
As you have a Time Capsule, one thing you can do is to start your MacBook Pro and make a Time Machine backup. Then, turn on your MacBook Air and set it up. Setup Assistant will ask you to restore a backup, so select the option to restore the backup from the Time Capsule and be patient. This can take a lot of time if you have to migrate a lot of files -
I have purchased the last Creative Suite available on disk. It will load on my old Mac Book Pro. I just bought a new Mac Book Pro and just realized there is no place to put a disk. Is there any way to load the programs to my new computer?
Buy an external optical drive such as the Apple USB SuperDrive that is made specifically for that model.
Use the optical drive of your old MBP to clone the DVDs to USB flash drives, then install from the flash drives.
Connect both computers to your local network and then share the optical drive to install the software. -
I have bought a new Mac Book Pro, and I need to know how I can move Aperture from my old Mac Book to the new one..
It begins with: F-285-NER-151-QBQ-and continues with 5 more 3 or 4 letters/numbers..
Yes, that is the number. And what version of Aperture have you installed? The same version as on your old Mac?
But it don´t work on my new Mac...
In what way does it not work? Does it require you to enter a licence number for Aperture 2 as well? That will be necessary, if your serial number is an upgrade serial number. Then you will have to enter all previous numbers as well.
Or does Aperture not accept the number as correct? Then check the spelling; some letters are easily confused like "I" and "1" and "O" and "0". Do not use the number pad to enter the numbers.
See: Troubleshooting Professional Application Serial Numbers
Regards
Léonie -
My wife and I have 2 new iPhones and also have a mac book pro and an iMac. How can we share apps, music and contacts between all these?
Use the same Apple ID and password for purchasing in all these devices.
-
I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html -
I just upgraded to the New OS on my Mac Book Pro and now my trackpad does not zoom in or out. I looked at system settings on trackpad and it is set, but does not work How do I get it started?
This is really unfortunate. I'm sorry that nothing works. I was going to mention holding down the power button and doing a force shutdown but you already did that. You might need to take it into the Apple store. I don't know if booting into safe mode would help. You would have to turn off the machine again, hit the start button and hold down the shift key after you hear the tone, but normally you would let go of the shift key when you see the apple logo and spining wheel. Maybe by holding down the shift key after you here the tone will cause the screen to come back on? The other option is to start up from the 'install disk' if your machine came with one. You would insert the disk, then shut down the computer, and hold down the C key right after hitting the start button.
Here's the link for the safeboot
http://support.apple.com/kb/HT1564?viewlocale=nl_nl
Maybe you are looking for
-
Master data Process chain running long time
Dear SDN Team, PC Process Chain: General Master Data - time running is about 4.5 hours . how we can improve running time. There are 15-25 info objects are loading from this process chain. any steps to improve the performace thanks and kind regards, L
-
Error message when burning audio CD from iTunes
I tried to burn an audio CD and got the following error message: "The attempt to burn a disc failed. The device failed to calibrate the laser power level for this media." Can anyone help?
-
A year or so ago I had turned on a toolbar that sat at the top with the other toolbar, and had many tools for development and checking of websites. You could turn Java on/off, javascript on/off, turn on source view, and many other things. Now I cant
-
Where do I get my serial number for a trial version
I have downloaded a trail version of LiveCycle Designer ES4. During installation it is asking for a serial number. I have the product code but the message returned is that it is invalid. I cannot find the serial number. Do you know where to get t
-
Install the oracle patch with OPatch
Hi: the error "ORA 3106" happened when the BW system was drawing out the data from the CRM system . I found the note "1005758 - ORA 3106 in Oracle 10.2.0.2",so I downloaded the oracle patch p5092134 and p6646850. I upgraded the opatch version to 10.2