I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support

I have put Ipod in restore mode and about 1/2 way through download it goes back to message "disabled type in passcode" ?? I have turned off all security and tried all trouble shooting ideas, any suggestions?? besides paying $$$$ to apple tech support

What appears to be happensin is that before the actual download finishes/restore starts. the recovery mode is timing out. I would do a manual download using the instructions here:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
Then place the iPod in Recovery mode and restore using the instructions in the link.

Similar Messages

  • When i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    when i turn on my iphone 5s gold,it keeps on showing the apple logo then turns off. i have put it in recovery mode twice. it will work a week or two then back again. please help! thanks you

    hi
    ... i  have  a similar problem
    but  just  with  the sleep botton.
    fist use  your adapter with other iphone/itouch ... is posible itś the  problem
    second ..  let your  phone charging
    ...normally if  we  conect  our  phone ... after  some minuts  it's put on.
    after 2 hours ... trate   to use  it ... if  after  it  your phone continue same... could  be qaa electrical/physic problem
    please  if you  have a guaranty use it.
    im  sorry but  my english   is terrible.

  • HT1414 I cannot turn off McAfee security and my phone is stuck in restore--what do you suggest?

    I cannot turn off McAfee security on my laptop and my phone is stuck in restore mode---what am I to do?

    Why can you not turn off the antivirus software?

  • Somehow i turned off the sound on the green midi loops.any suggestions?

    been using Logic a lot and now when i play MIDI green loops there is no sound...i have check the track is not muted in any way and there are difinitely notes there. Also when i use the MIDI keyboard by pressing caps lock there is no sound there too.Sure it's something simple...checked in system preferences/sound and everything apppears fine.I know it is not my speakers as i can hear music and the clicks on volume, plus also audio regions.Any suggestions folks? :-)

    Master volume setting?
    Wave-out volume setting?
    Correct output hardware selected? I looked in the Java API docs and found the package for
    javax.sound.midi . Which one of the below classes
    might have those parameters so I can check them ?
    Thank you in advance
    Instrument
    MetaMessage
    MidiDevice.Info
    MidiEvent
    MidiEvent
    MidiFileFormat
    MidiMessage
    MidiSystem
    Patch
    Sequence
    Sequencer.SyncMode
    ShortMessage
    SoundbankResource
    SysexMessage
    Track
    VoiceStatus

  • I updated my 3GS to os5 and set up icloud and it backed up, although, the backup says incomplete. I turned off the contacts and they are now all gone off the iphone. How do i get them back? I feel like they are in icloud, they are on other iphone i have.

    I updated my 3GS to os5 and set up icloud and it backed it up, although, the backup says incomplete. I turned off the contacts under icloud and they are now all gone off the iphone. How do I get them back? I feel like they are in icloud, because the contacts went to another iphone i have.

    I did turn the contacts back on and it didnt work. I am hoping the wi-fi connection I am on at school is not compatible, and it will work when I get home. Thanks!

  • Dropped my Ipod, I have put it in Disk Mode, I have downloaded the new software, tried to restore it and it has seized please help?

    I dropped my Ipod (4TH Generation Ipod Nano) I have got it start up again I have put it in disk mode and connected it to Itunes,
    I have downloaded the new software through Itunes, that went well, it came up as normal.
    I have got it to restore to factory settings. (Although before hand it synced and all that)
    During this process it has seized and not done what it was suppose to, only displaying the Apple Symbol.
    I disconnected, and it has gone flat and now is telling me to connect it to power, when I do so nothing happens.
    It won't connect to itunes.
    Please help.
    MJ

    Hello there pipem90,
    Heres an article about that very issue. Check out this article named iPod not recognized in 'My Computer' and in iTunes for Windows found here http://support.apple.com/kb/ts1369.
    There is more to the article but start here:
    1. Start with the iPod Troubleshooting Assistant
    If you have not already done so, try the steps in the iPod Troubleshooting Assistant which applies to your iPod; this will often solve your issue.
    If you're still experiencing the issue after going through each of the steps in the assistant, continue with the steps below in this article. The most likely solutions are listed below (for both USB and FireWire (IEEE 1394) iPod connections). Check each section starting from the top of the list to see if that is what's keeping your iPod from appearing.
    Note: To determine if your iPod syncs via USB or FireWire, check the table in the Additional Information section below.
    All the very best,
    Sterling

  • Anyone have a syggestion on how to get my Ipod touch working again besides putting it into restore mode

    Anyone have any ideas on how to get an Ipod touch to charge or sync without putting it into restore mode, I've prettymuch tried everything thats been put online so far

    Tried DFU mode?
    To do this follow these instructions:
        1. First, Open up iTunes, plug in your iPod Touch/iPhone to the Computer's USB port. Turn on your Computer's speaker and make sure it is loud enough that you can hear it.
        2. Hold down the Home button (top left for iPod Touch and top right for the iPhone with the screen facing you) and the Power button (located on the front bottom of your iPod Touch/iPhone) simutaneously, until the screen goes black and the device turns off. (past the red slider/slide to power off screen)
        3. Now let go of the Power button, but continue to hold the Home button. Your iPod Touch/iPhone should have turned off and the screen should not be on.
        4. After around ~10-20 seconds, you will hear a noise (beep/ding) from your Computer as if it had just recognized a new hardware device, now iTunes should recognize it in DFU mode.
        5. After iTunes recognizes the iPod Touch/iPhone, let go of the Home button otherwise it will go into recovery mode and you will have to do the entire DFU process over again.
        6. You will know when you have put your iPod Touch/iPhone correctly into DFU mode when the display is blank and that you do not have anything on your device.
    Once you have done this click restore and iTunes sould start to dowbnload and install the latest firmware.
    #Please note this will reset your iDevice to factory settings
    Syther101

  • My iPhone will only open apps in landscape mode. I have turned off/on, reset, and restored so far nothing has worked. Any other suggestions on how to fix this?

    My iPhone will only open apps in landscape mode. I have turned off/on, reset, and restored so far nothing has worked. Any other suggestions on how to fix this?

    Hello, bravy114. 
    Thank you for visiting Apple Support Communities. 
    Check to see if screen-orientation lock is enabled in Control Center.  Here are the steps on how to enable or disable this feature.
    iOS: Understanding Control Center
    http://support.apple.com/kb/HT5858
    Cheers,
    Jason H.

  • Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?

    Ever since updating my iPad with the iOS 8 and 8.0.2 it has been much slower in every way. Any suggestions besides restoring to last iOS?

    Hi Arianelleangel,
    Welcome to the Support Communities!  If you are having issues trying to update your Aunt's iPad, the troubleshooting steps below may help:
    Resolve issues with an over-the-air iOS update - Apple Support
    Update does not complete
    If you're installing the update and the progress bar appears to move slowly, be patient. The time an update takes depends on the size of the update and the number of files on the device.
    When you're updating over the air, keep your device connected to a power source so that it doesn't run out of power. If your device does run out of power, connect it to a power source and turn on the device to let the update or restore complete.
    If the update never completes and the progress bar hasn't moved for an extended time, try restarting your device. If you still see the issue after you restart, see what to do if your device appears frozen or won't start.
    I hope this information helps ....
    - Judy

  • I had a friend replace the battery in my iphone4 and now the itunes store does not recognize it. I could put it in restore mode and then I would loose all my data. the phone just has the apple on the scree right now. any suggestions

    I had a friend replace the battery in my iphone 4 and now itunes does not recognize it. The phone just has the apple coming on and off on the scree.
    I put it into restore mode last night but did not apply it because I would lose all of my data.Any suggestions on what I can do.
    Thanks
    ted

    Make an appointment at the genius bar. Take your credit card. An out of warranty replacement is $229. It's cooked.

  • Ok so I was getting the IOS 7 update and when i got it, it had an error during the download. so now it says if i want it to put it in restore mode, if i do will my ipod loose everything and if it does will i get it back

    ok so I was getting the IOS 7 update and when i got it, it had an error during the download. so now it says if i want it to put it in restore mode, if i do will my ipod loose everything and if it does will i get it back

    I went back to iOS 7 and my backup file is restoring but when its done nothing is on my phone still and only takes 11-15 minutes to restore the backup instead of taking 25+ minutes like usual so I guess the backup is corrupted. How can I fix this?

  • I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    I have a shuffle. When I plug it into Itunes, it tells me that it has not been ejected properly, and it will not recognize the Ipod. I have turned off the computer, and tried this with another shuffle with the exact same results. Any ideas?

    Do you remeber the exact (or close to it) wording of the error message?
    Try manually placing the iPod in Recovery mode and then try to restore
    Next try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    You can also try another computer  to help determine if you have an iPod or computer problem.

  • I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I am using system 10.8.2 and have an issue with the screen saver not filling the screen. the desktop does, but not the screen saver. I find adjustments for the desktop, but not the saver. Would appreciate any suggestions.

    I have a group of my images that rotate, and yes it happens oneach. I do believethat I have at one time had the images cover the entire screen, however I cannor remember how I made that happen, just like the desktop. I am sure it is old'ites setting in!

  • I bought a second hand ipod 4 and it's not letting me sign into icloud. A message saying the five free accounts have already been registered to this ipod.? what can I do?

    I bought a second hand ipod 4 and it's not letting me sign into icloud. A message saying the five free accounts have already been registered to this ipod.? what can I do?

    From a previous post:
    UPDATE:  it is possible to remove an iCloud affiliation from a device when the maximum number of free accounts has been used.  I used the "reset and erase" option from Settings | General | Reset | Erase All Content and Settings.  When this was finished, the iPod was like new - not just "restored" as we can do within iTunes and I had done with this device - it was legitimately restored.  I signed in with my son's newly created Apple ID and it was accepted and now the device works like a charm.  It also still uses my Apple ID and password for the iTunes and App stores, however I have restrictions in place to prohibit him from downloading or buying any content.  I hope this helps anyone else that has reported this question.

  • How to put ipod in recovery mode without a home button ???

    how to put ipod in recovery mode without a home button and i cant get in to my devise what can i do ???????????

    Place the iPod in recovery mode using one of these programs:
    For PC
    RecBoot: Easy Way to Put iPhone into Recovery Mode
    or
    http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
    If necessary:
    Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
    and                                           
    RecBoot tip
    RecBoot may have problems on 64X windows, then try:       
    Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
    For MAC or PC       
    The Firmware Umbrella - TinyUmbrella
    Installs blootware on PC too

Maybe you are looking for

  • Can not activate EAX and SVM Support in Media Source Organizer with Audigy2 !!!!!!!!!!!!!

    Please there must be somebody out there able to me!Ive got an Audigy2 SB0240 (driver: SBAX_WBUP2_LB_2_09_006.exe)? and Media Source (CMS_PCAPP_LB_3_30_2.exe) Windows XP Pro SP2So after the CORRECT Installation and?Updates to the actuall securely work

  • How to remove cached images in html whe going from one page to another page

    can anybody help how to remove cached images in html pages.i tried with response.setHeader("no-cache") but it is not working

  • I CAN'T BELIEVE: iSub and 10.4.4,there's still the issue!

    so...it's from April that we iSub (USB plugged) and Mac users are waiting for this. No updates solved our issue,not 10.4.1,not 10.4.2,not 10.4.3 10.4.4. they say that is improveet the USB hardware support...and the iSub?? whay do we have still the vo

  • Albums vs Folders

    New user to PSE11. Is it recommended that ALL photos be in albums or is the idea that photos in albums are a subset of the photos in folders? With all the sort and search functionality, I don't understand the benefit of albums. I name my image folder

  • DDE is not working in 10gr2

    Hi.. I am using dde package for importing data from excel files , it's working in my pc , but when we deploye it on apps server it's giving error message. is it possiable to use dde in FORMS 10gr2.