I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.
I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE
I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html
Similar Messages
-
I have purchased my first smart phone, an iphone 5. I would like to use some of the sounds from text messages for ringtones but don't know how to move them over. Any help would be appericated.
I'm sorry, had you already pointed out the rules which stated that lines from 2 separate accounts were eligible??? I don't see anywhere in the advertisement specifically stating that lines from 2 separate accounts would be eligible, so THAT is not what's advertised, either.
As far as I know Verizon's BOGO offers have ALWAYS been for lines on the same account. Possibly someone could chime in where they have received this offer on 2 separate accounts? The ONLY exception to this was someone getting the offer with 2 eligible lines on their account, reactivating the old phone on one of the lines and then giving one of the new phones to someone on another account.
Sorry if you think simply because someone disagrees with you, they are being condescending. That is certainly not the case. Good luck. -
I have a school ipad with iCloud using a different ID (my school email address) . I am leaving and want to buy my own ipad and transfer all my data and docs to my personal iCloud account but don't know how to do this without deleting all data and photos?
Heya Katie!!
So, the article you have there, HT4895, is pretty good. Just look at the FAQ section of it.
But basically, you will want to create a backup on your computer through iTunes...Just plug your current iPad into it and make sure your iPad and iTunes are logged in with the same Apple ID. At that point, just create a backup.
When you get your new iPad, and before you plug it in or set it up, follow the directions in this link to change your Apple ID. http://support.apple.com/kb/HT5621?viewlocale=en_US
Once you have that done, plug your new iPad into your computer to sync up with iTunes. Follow the directions for Restore from Backup and it should bring all that info back to your new iPad.
And changing your Apple ID email info will allow you to have your own!!! This should solve all your issues and GL!!! -
My MacBook Pro won't go beyond a white screen, after I pushed the restart button. How can I get it to a login? I have routinely backed it up, but don't know how to bring that up, nor if I have a boot file on that external disk. Help!
Take each of these steps that you haven't already tried. Stop when the problem is resolved.
To restart an unresponsive computer, press and hold the power button for a few seconds until the power shuts off, then release, wait a few more seconds, and press it again briefly.
Step 1
The first step in dealing with a startup failure is to secure the data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since the last backup, you can skip this step.
There are several ways to back up a Mac that is unable to start. You need an external hard drive to hold the backup data.
a. Start up from the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
b. If Step 1a fails because of disk errors, and no other Mac is available, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
c. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
d. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. You might be able to start up in safe mode even though you can't start up normally. Otherwise, start up from an external drive, or else use the technique in Step 1b, 1c, or 1d to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a startup failure can be resolved by resetting the NVRAM.
Step 4
If a desktop Mac hangs at a plain gray screen with a movable cursor, the keyboard may not be recognized. Press and hold the button on the side of an Apple wireless keyboard to make it discoverable. If need be, replace or recharge the batteries. If you're using a USB keyboard connected to a hub, connect it to a built-in port.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to start up, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can start up now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've started from an external storage device, make sure that the internal startup volume is selected in the Startup Disk pane of System Preferences.
Start up in safe mode. Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to start and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know the login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you start up in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, the startup volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 11. If you ever have another problem with the drive, replace it immediately.
If you can start and log in in safe mode, empty the Trash, and then open the Finder Info window on the startup volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)
If the startup process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select the startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.
Step 9
If the startup device is an aftermarket SSD, it may need a firmware update and/or a forced "garbage collection." Instructions for doing this with a Crucial-branded SSD were posted here. Some of those instructions may apply to other brands of SSD, but you should check with the vendor's tech support.
Step 10
Reinstall the OS. If the Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 11
Do as in Step 9, but this time erase the startup volume in Disk Utility before installing. The system should automatically restart into the Setup Assistant. Follow the prompts to transfer the data from a Time Machine or other backup.
Step 12
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a startup failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 13
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider. -
I have downloaded MAMP for Mac and want to use it for working with Wordpress. I'm on an Imac with Maverick OS 10.9. I had mysql installed before this and would like to uninstall it and use MAMP. It was easy to turn off Apache and PHP but don't know how to uninstall mysql. Please help!!
It depends on how you installed it. You have to shutdown the MySQL service first. If you used the standard, but obsolete Startup Item, you can do that with the Startup Item. If you created a launchd script, you can do it with launchctl. Once MySQL is no longer running, you can delete the Startup Item or launchd script and the rest of MySQL.
-
I have a new iPhone for work, set up on a new iTunes account (PC). I was told i can associate it to my home iTunes account (iMac) but don't know how. I want to save the work related apps as well. Any advice? Thanks
Thanks. I messed up with my husbands iphone because I was told the wrong thing. Now everytime I sync his phone it makes it look just like the other phone I had. Do you know how I can fix taht for his phone? Any settings I can turn off that will prevent all of my apps/contacts, etc from auto populating his phone?
-
I Can no longer synch my iPhone and iPad to Outlook using iTunes on a Win 7 Pc. I updated to iTunes 11.1.4.62 a few days ago. Don't know if that caused my problem. I've reset the Synch History, deleted any Notes in Outlook that don't have a subject. Grateful for any help.
You might have better luck in the iTunes for Windows community. I'll ask the hosts to relocate your post.
iTunes for Windows -
I added items to my iPad calendar yesterday but they wouldn't copy into the calendar on my IPhone. I switched both devices off and on again but to no avail. The calendars were all ticked the same. I have now deleted the iCloud calendar from the iPhone but don't know how to get it back.
My Errands app is also not syncing. If I mark something as Done on the iPad, it's not removing them on the iPhone version.Hi SwimmingMummy,
I have a couple of articles here for you that will help you troubleshoot these issues with Reminders and Calendar:
iCloud: Troubleshooting iCloud Calendar
http://support.apple.com/kb/TS3999
iCloud: Troubleshooting iCloud Reminders and Tasks
http://support.apple.com/kb/TS4000
Thanks for being a part of the Apple Support Communities!
Regards,
Braden -
i have just bought a macbook pro and i want to use an ext hard drive with it which i previously used on a windows computer, but when i plug it in it doesn't show up on my macbook pro, I've wiped it and just need to format it but don't know how, any help would be much appreciated
Try the other USB port. If it still doesn't show up in Disk Utility then there may be something wrong with your Mac. Try something else in each USB port and see if it is seen. If the other thing, like a USB thumb drive, does show up in disk utiltiy then the USB ports are fine.
Power down the system and restart with the drive connected, go to DU and see it it is seen. -
I have rented some movies and have them in itunes. I want to move them to my iphone but don't know how can someone help?
http://support.apple.com/kb/HT1390
Regards. -
Can someone please help. I have a really old MacBook that is running really slow. I want to wipe everything and reinstall the latest software but don't know how to do this. Also is there a way of keeping Microsoft Office when doing this? Thanks in advance
You do realise that wiping the disk means that everything on the disk is erased. Everything. Photos, music, emails, ...
So the first piece of advice is to make sure you have a back up of everything.
You need the OS disk to reintsall the operating system. You will use that disk first to erase the drive, then to reinstall the OS.
Here's the link for the US. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
As for MS Office, you will need the original disk that it came on to reinstall it. -
Every time an email comes in it's preceded by two telephone rings. I don't know what I did to create the problem so I don't know how to resolve it. HELP PLEASE!!!
settings >>>>notifications>>>>Mail >>>>allow notifications >>>off (your choice )
settings>>>sounds>>>new mail>>>>none ( will kill rings ) -
Hi have just bought a Sony Xperia J and am not able to tether my ipad as I did with my Nokia C3. Why?
What do I have to do to solve the problem so I can tether to my Ipad?
Is this phone another of the things that Apple does not support? How do I know before I buy a phone that it will be supported?How are you attempting to connect them?
Looking at the Experia J features it does seem to support Wifi Hotspot, but there is no mention of a Bluetooth hotspot. Different phones offer different things.
The iPad issues the message, because there doesn;t seem to be anything it can do with it. But this is not something apple is blocking its more a limitation or a non present feature of the phone.
From the Manual which I assume you've read through:
To share your phone’s data connection as a portable Wi-Fi® hotspot
1 From the Home screen, tap .
2 Find and tap Settings > More… > Tethering & portable hotspot.
3 Tap Configure Wi-Fi hotspot.
4 Enter the Network SSID for the network. Tap the Security field to select a
security type.
5 If required, enter a password.
6 Tap Save.
7 Mark the Portable Wi-Fi hotspot checkbox. The phone starts broadcasting its
Wi-Fi® network name (SSID). You can now connect to this network with up to
8 computers or other devices.
8 Unmark the Portable Wi-Fi hotspot checkbox when you want to stop sharing
your data connection via Wi-Fi®
When that is set up, you can use your iPad to look for the Wifi network the phone is providing and connect to it as you would any wifi network.
http://www-support-downloads.sonymobile.com/st26/userguide_EN_ST26_1268-7245.1_A ndroid4.0.pdf
http://blog.clove.co.uk//wp-content/uploads/2012/11/Sony_Xperia_J_ST26_User_Guid e.pdf -
How do I get iTune to send me the answers to my security questions or how to reset them. I do have a rescue email address but don't know how to have the answers sent to it.
1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
2. Here are two different but direct methods:
a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
b. Call Apple Support in your country: Customer Service: Contacting Apple for support
and service.
3. For other queries about Apple ID see Frequently asked questions about Apple ID.
4. Rescue email address and how to reset Apple ID security questions -
Have to install flash player (samsung tab), but don't know how
have to install flash player (samsung tab) but don't know how.
Unfortunately, Firefox for android doesn't support Flash Player. Yet. That feature will be coming soon in a very near future release ;)
Maybe you are looking for
-
Muse: How to set up a bilingual site with 2 different navigation bars?
Hi, I would like to create a website in 2 languages, desktop and mobile version. The structure of the page remains the same for each language. How should I create the site so that I get one navigation bar for the first language and a second one for t
-
Clock problem and shutdown problem! Are they related?
Having a problem with my Dual 2 GHz Power Mac G5 A few days ago I noticed that my clock was not showing in the menu bar in the upper right corner of my desktop. I went into System Preferences and went to Date & Time. Under the clock tab "Show Date an
-
Why my ipad have problem with the rotation screen
i have a problem with the rotation screen is locked, i try everything but nothing is happening help
-
Well I just got my NEW Logitech 530's connected up to my A. 2-ZS but int the process I had to take my Headset connector OUT of the Line Out on the Card to run a Line Out to the speaker amp in the Sub - NOW the only way to get sound to my Headset is t
-
Hi, I have a query like this: SELECT decode((select count(1) from patient_history b where (b.studyid =a.studyid and b.baseline_no= a.baseline_no and b.aeseq=a.aeseq and release_date IS not NULL)),0,'New','Current') status , a.* FROM patient_history a