I have recently installed Lion on my iMac but now I cannot use attachments in hotmail in any browser
I have recently installed Lion on my iMac but now I cannot use attachments in hotmail in any browser. I am using an early 2009 21 iMac.
Try https://discussions.apple.com/message/23672167#23672167
Allan
Similar Messages
-
I installed Mountain Lion on my iMac. Now I cannot access the Internet. All the other computers and tablets on the network have no problem. I did PRAM and MC reset, modem reset, etc., all the usual ju-ju. I also cannot connect on my local network to any other computer. Yet Network control panel says I am connect to the modem, and Network Diagnosis says I am connected to the Internet. It's like the blind man who has eyes that cannot see. BTW, I am not some newbee. I have been a Machead since the early nineties and set up a half dozen networks, including the one I am using at home to which the iMac mysteriously is there but not. This has me stumped! I am considering going back to 10.7!
Select ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP. What values are shown for the following:
Configure IPv4
IPv4 Address
Subnet Mask
Router -
hi all i have recently bought a second hand imac but didnt recieve the administrator passwords any suggestions?
If you can't get the discs, call Apple with the serial # and ask for them. They should send them to you for a reasonable charge.
-
I misplaced my ipad, so I remotely erased it. Then I found it, but now I cannot use all of the options in the settings. I have restored from backup, but it still is not letting me use all functionality. Help!
Would throwing it in Recovery mode and restoring as new clear it up?
(same for Ipad)
Step 1: Turn off the iPhone. To do this press and hold the power button till you see the “Slide to Power off” screen. Now slide the button to turn it off.
In case your iPhone is stuck in an infinite loop and the previous option is unavailable, press and hold the Power and Home button till the screen goes off. Remember to leave both the buttons as soon as the screen goes off and before the Apple logo appears again.
Step 2: Connect the iPhone’s USB cable to your computer but not to your iPhone yet.
Step 3: Now hold down the Home button and while you are holding it connect the USB cable. Keep holding the Home button till you see the Connect to iTunes screen on your iPhone(Screenshot shown below). iTunes will show an alert saying a device in recovery mode has been detected.
Here’s what your iPhone screen will look like once its in the iPhone Recovery Mode.
Read more: http://www.callingallgeeks.org/15018/how-to-put-iphone-or-ipod-touch-into-recove ry-mode/#ixzz296y04ygX
Under Creative Commons License: Attribution No Derivatives
THEN RESTORE THE DEVICE AND SETUP AS NEW. JUST YOU WILL HAVE TO DOWNLOAD YOUR APPS AGAIN(FREE) ETC....
LEAST THE SECURITY WORKS HAHA!!! I also wouldnt get upset, be thankful you found it. -
I recently installed iOS 5 on my iMac. Pages no longer has the "Save as" command in the file menu. Can anyone help?
It's not you, it's Lion, Save As is gone.
-
This is my first attempt at using this forum so please be patient with me. I am new to the apple world. Bought an Imac desktop computer back in October and installed Microsoft Office for Mac 2011 because I was used to Word, Excel, Powerpoint, and outlook. Now I am being told that I should be using ical for my calendar so that I will be better able to move to icloud for use between my Imac, Ipad2, and Iphone.
The question is: how do I move my calendar which is in "Outlook for Mac 2011" into ical on my Mac? Do I have to remove the Outlook entries from the computer and reinstall them back to the same machine or can I somehow move calendar entries within the machine? I appreciate any help I can get. Thanks.I also already deleted my phone number from iMessage on my MBP.
-
I have bought OSX Lion 1 month back paying $29.99, and now new OS is getting released, there will any updates for the OSX Lion with new features or I have to again buy it paying $19.99, Please let me know??
http://www.apple.com/osx/uptodate/
-
I have recently done the applie upgrade on my iphone 4 but now my itunes just goes blank any ideas
Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)
-
I get the message "iTunes was installed incorrectly. Reinstall iTunes. error 7 (windows error 127) And the following message. I have uninstalled ALL Apple software twice but the problem remains. Can anyone help with this?
problem solved see https://discussions.apple.com/message/24604581?tstart=3#24604581?tstart=3
-
OSX version 10.9.4
Aperture version academic 2.1.4Aperture 2 is not supported on OS X 10.9, in fact it has not been supported since 10.6. While some of the functions might work overall it will not run sufficient;ly well to use and corrupting your library is a real possibility.
So yes you will need to upgrade to the latest version of Aperture by buying it in the Mac App Store. Keep in mind that Apple has announced that Aperture is being discontinued. It will work with the new OS coming out in the fall but will be replaced by the new Photos app now being developed.
regards -
Help
The Yosemite update wrecked your Ps CS5.1 installation. Thank Apple for that.
The workaround is to uninstall CS5, look for, download and run the Adobe CS Cleaner Tool, Repair Permissions with Apple's Disk Utility, install CS5 from scratch, apply all available updates to it, and then Repair Permissions with Apple's Disk Utility once again, in that precise order.
You should know that there are bunches of bugs and issues that Apple still has not managed to fix in Yosemite. Users have been advised to downgrade to a more stable issue of OS X and some have. -
I have just installed Lion and the text window for web addresses in safari has disappeared. Any ides how to getit back?
Select Customize Toolbar from the View menu, select the item and drag into the toolbar. Place where you want it to be.
-
HT201210 I have updated my iphone and now I cannot use it. Error says no sim installed?
I have updated my iphone3 but now I cannot use it. Error message says that no sim installed?
contact the carrier maybe the sim card is damaged
-
Please help.. I have just tried to install lion on my iMac and it can't complete because of 'disk error'.. can i delete lion and go back to leopard as there was no problem there?? can't get past grey screen
Just restore your bootable backup/clone or Time Machine backup.
-
Hi guys, I have recently installed window vista by using boot camp under Lion, and how do i install the drivers for vista?
I don't have any installation disk come with this mac, therefore i have no ideas how it work?
thanks.You should visit the Boot Camp forum, https://discussions.apple.com/community/windows_software/boot_camp. This issue has been asked and answered several times.
There are no Vista/XP drivers for Lion or for the newer Apple computers.
Maybe you are looking for
-
ACS 5.1 "Launch Monitoring & Report Viewer" not working
I'm trying to view the logs on the ACS server via the web interface. When I click on "Launch Monitoring & Report Viewer", it opens a new window and I get the error "cannot display the webpage". This happens on both Firefox and IE. The URL it's try
-
Billing document VF02 (Payment Terms )
Hi, We have an issue, we need to change the Payment Terms field at billing header info after generating a Billing document; but the field is protected. As I read at the help text, it says: "Terms of payment key Regardless of whether or not a key is d
-
[moc] Why not write a C library?
Hi there, I'm just a novice, but I wondered why moc developers didn't write a C library for Music On Console. I think this is the only drawback compared to mpd. I'm learning C and I am writing a little program which needs moc, and I can imagine using
-
hello everybody , can anyone give me a brief idea on how do IDoc's(SAP) and mercator tool (non-SAP) talk to each other. any idea would be lot of help. TIA
-
PLSQL does not support 'Sum Over Partition'
I have something (and many obvious syntactical variations) like the following which works great in SQLPLUS but not in PLSQL: select table1.aField, table2.bField, sum (table1.type) over (partition by type) from table1, table2 where aField = something;