I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

You can solve this problem. Just follow these instructions:
http://support.apple.com/kb/ht1212

Similar Messages

Since iOS 5activation not possible. Tried it for a few hours but doesn't work. How can i solve this problem?

When I try to activate from my iPhone it says: iPhone could not be acticated, actication Server is unavaillable. When I connect to iTunes it says: No Sim-Card insert. But my Sim-Card is insert! How can i solve this problem? It's freaking me out. I try it since yesterday without any success...
Please help.

If you have to ship your phone back to the US, then you will need to ship is to a friend or a relative who actually lives out there. You CANNOT ship it directly to Apple as they will not accept it. Send it to a relative or friend that you have there and if you don't have any, then you are out of luck as there is nothing that you can do.
That is why is was not really a good idea to purchase an iPhone is the US when you are ultimately going to use it in China. With no international warranty on the iPhone you are stuffed really. You should have bought it in China and then you would not be facing this problem.
Nothing you can do except get on a plane and fly to the US or send the phone to a friend or relative.

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
After that is done reboot the machine and see if you can log in.
If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
Reboot and try again.
If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
Lots of work, but there is no Lion disks.
https://discussions.apple.com/message/16276201#16276201

I bought an i pad as second owner, the first owner said he just open it but when i returned to my twon, i realized that he make account and download some programes, i lost the opportunity to download free I work programes how can i solve this problem

i bought an i pad (4) on 2014 as second owner, the first owner said he just open it but when i returned to my town, i realized that he make account and download some programs, i lost the opportunity to download free I work programs how can i solve this problem?

If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.
IF the iPad is working ok but is signed in to another users Apple ID use the Settings app to sign out of the old ID and sign in to your Apple ID.
Settings > itunes and App Store > tap on the applie ID and sign out > sign in with your Apple ID.
you should then be able to download or purchase apps using your Apple ID.

TS2565 when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

when updated to 9.1.7 from 9. I need new serial and the old serial number doesn't work. How can i solve this?

There was no new serial needed to update from Logic 9 to 9.1.7
If your Logic 9 was an upgrade from Logic 8 it may be asking you for your original Logic 8 Full serial first and then your Logic 9 Upgrade serial...
Otherwise, it's best to call Apple directly and get them to help you...

I m using macbook pro my enter key is not working suddenly how can i solve this problem?

i m using macbook pro my enter key is not working suddenly how can i solve this problem?

I have tried to delete but Com.Apple.keyboardtype.plist is missing therefore I cannot reset the keyboard
/Library/Preferences/com.apple.keyboardtype.plist

Creative Cloud error message :could not implemented unzip a file on temporarily directory (EX11)I tried many times but it was not working.

Creative Cloud error message :
could not implemented unzip a file on temporarily directory (EX11)
I tried many times but it was not working.

Nobody can tell you anything without proper system information. Failing extractions can have all sorts of causes. Start with a little system maintenance:
Installation Preparations | Mylenium's Error Code Database
Mylenium

Trying to sync voice memos I get "was not copied to the iphone because it could not be found"

I recorded some "voice memos" on my iPhone 5 (iOS 6.1.3). I now just want to get them onto my computer. I have followed the instruction from other posts and selected the "Include Voice Memo" checkbox and also the "Voice Memo Genre" checkbox located on the Music tab. I then click on Sync and get the following error ... "Some of the items in the iTunes library, including ----- were not copied to the iPhone because they could not be found". So I understand that the memos were not copied to the phone ... this is good since I already have then on the phone. I want, instead for them to be copied FROM the phone to the computer. So what's the problem I thought that SYNC'ing meant copying new files from the iPhone to the computer as well as vice versa.
The Voice Memo is toolarge for me to simply email to myself so I need to understand what is causing this so that I can get around it. I have noticed that when I attempt to "Organize Library" and check "Consolidate Files" (suggested by some forum somewhere) when I close the dialog box and sync again, that when I return to the "Consolidate Files" checkbox i see that has actually cleared itself and is no longer checked. I am not sure if this is related or not.
I have a very business recording that is on my iPhone and MUST get this audio off the phone ASAP. Any help would be appreciated.
Sincerely,
gstenstrom

The dialog tells you the path to the song is wrong/not there. Make sure you can play it in iTunes.

Please can anyone solve this problem...it's taking over my life!!

Hi, I hope someone can hep me with this as it's driving me crazy!!...I have a magnify glass effect for my main movie and everything is working great, except I need the magnify glass to stay within certain boundaries on the stage...basically when someone moves there mouse away from the flash movie in the centre of the page in a browser, it cuts off the glass and it looks funny (see www.zoeglazebrook.co.uk)...
Kglad has very kindly donated many hours to trying to solve this but it still isn't working unfortunately.
This is the code on the main timeline, and I just need to add in 125, 127, 1095, 775 coordinates in there to make it not go past these points on the stage:
var moveGlass:Number;
magnifyingGlass.onPress = function() {
    moveGlass = setInterval(startGlass,1);
function startGlass() {
    magnifyingGlass._x = _root._xmouse;
    magnifyingGlass._y = _root._ymouse;
magnifyingGlass.onEnterFrame = function(){
     this.largeobject._x = (this._parent.original._x-this._x)*2;
     this.largeobject._y = (this._parent.original._y-this._y)*2;

I'm not sure I understand your question.
I think you are asking about how once you start clicking it doesn't go off? You can add something like this:
magnifyingGlass.onRelease=magnifyingGlass.onReleaseOutside=function(){
delete this.onEnterFrame;
If I'm following you correctly. Or not.
I'm actually more annoyed by also having the pointer still show. So you might add a Mouse.hide() when they press and a Mouse.unhide() when they release. BTW, you need the onReleaseOutside because if you are limiting where the magnifying glass can be dragged then the pointer might not be above the glass when they release. Most people forget the onReleaseOutside and it causes a lot of problems.
Also I'm confused about your confusion of "...whether it's better to have a start drag on there instead."
startDrag() does just that. It takes the item that is referenced and makes it follow the pointer. And it also gives you an easy way to limit the bounds of that dragging to a rectangle. However you can only drag one thing at a time using startDrag and there is no way to do other things as you drag.
In this case you need to also reposition the large view at the same time based upon the position of the pointer. Therefore you need some other kind of loop that says, "every little bit of time make the glass match the mouse coordinates and also align the large image." You could probably make some kind of combined solution that starts the magnifying glass moving with startDrag and uses an onEnterFrame to position the large view, but why make it more complex than it needs to be?

Seriously. Can anyone solve this problem?

HI, I'm still struggling with this problem.
I have reinstalled the software, all the CS4 programs work fine and Premiere Pro does too apart from the problem that when I export, it gives me the menu to choose the output format, the location to save to etc etc. I then click export and the media encoder doesnt open.
I opened the task manager and nothing appeared when I tried to export so...?
Help this is killing me. I've made an entire film that I cant export

What do you mean by installing web browsers?
I didn't say anything about installing web browsers. I said to be sure not to have anything open when you run the CS4 installer--particularly web browsers--as they frequently result in failed installations. Adobe has acknowledged this but done nothing to fix the situation presently. It does not sound like this is the problem, however.
Is it possible that cleaning the scripts has effected the copy of CS4 MC I had on my hard drive? If I delete the copy and try putting it onto my PC again it will remedy those problems? It doesnt seem to like anything about the copy of CS4 I have now, and before this incident I reinstalled it maybe 4 times for various reasons without any problems?
I think you're getting confused. We're not talking about "cleaning the scripts"... we're talking about a script provided by Adobe that is supposed to wipe all traces of a previous installation of the CS4 suite, that were not removed during a standard uninstallation routine. If you tried running the Clean Script while you still had CS4 installed, chances are fairly high that you've created more problems for yourself. The Clean Script should only be run after a complete uninstallation, and from the sounds of it, you did not do this. I'm assuming you're running Windows; you need to go to your Control Panel, and use Add/Remove Programs or Uninstall a Program (depending on your Windows version) and uninstall the CS4 suite. If it doesn't show up in the list of installed programs, you've got bigger problems, because now parts of the suite are still present on your system, but there is no way for the uninstaller to remove them. The Clean Script--run properly--might help, but I can't say for sure. At this point, your only recourse might be a complete wipe of the computer, operating system and everything, and start over from scratch. Not good news, I realize, but the CS4 suite is a massive set of programs that sends out tendrils deep into many parts of your hard drive, and it can't simply be deleted like a file.

I produced a video with my iphone. The file is about 800 mb. Several times I tried to download it to my computer but this did not work! how can I solve this problem?

how can I download my video from the iphone to my computer?

When you connect your iPhone to your PC, a pop-up box should open saying something like "What would you like to do?" and click import videos and photos. If it doesn't open automatically, go to Start>Computer>Then highlight your iPhone by clicking it once>Then on the tool bar about, near the navigation buttons and search box, click Autoplay (or something like that).
Sorry if my answer isn't as sharp as it should be, I switched to Mac and I use iPhoto for everything.

Its about Orkut whenevr i try to upload photos it shows that "it will appear soon" bt i cant if i try with google crome within minute it appear n many problem occuring with same website. can anyone solve this problem?

m facing problem with photo uploading n search in orkut instead of Firefox Google crome perform better, well m huge fan of Mozilla Fire fox.
== URL of affected sites ==
http://www.orkut.in

I have recently started having this problem in PSE8. The Adobe workaround
did work, but I don't fancy having to re register each time I use it.
What I have discovered is that it's nothing to do with the image metadata as it occurs before any image is opened.
It SEEMS to only occur if you use file/open with to open an image in the editor - IE start PSE with that command.
If you close elements down, and start it using programs/PSE/Elements (or your desktop shortcut) - the panorama feature magically works.
Each time I've opened the editor 'automatically' using image/open with, it seems to create the problem.
Hope this helps

My applications disk won't install. Can anyone solve this problem?

I've recently bought a refurbished MacBook Pro, however upon trying to install the applications using the applications disk, it repeatedly states 'installation failed' and advises me to contact the service provider. I have already installed the OSx Lion without any issues, however the issue with the applications disk remains unresolved. It appears to begin the installation process each time with a loading bar, but then always eventually says 'error installation failed'.
I really really want to use the iLife applications that come with the MacBook Pro (main reason i bought it), hence why this is really irritating me. I will therefore be incredibly thankful if anyone can offer any solutions without a price tag, as I don't want to download from the app store when I'm meant to install them free and simply using this disk.

My wife uses my Apple ID and password to download and install all her software because that way we only pay for it once and get essentially a family license. Otherwise we would each have to purchase and pay for our own copy. However, that only applies when we are purchasing software from the App Store or the iTunes store. We each have our own individual iCloud accounts where we store our personal Contact, Calendar, and other data. You can change the Apple ID on your wife's computer by going to System Preferences > Accounts and choosing her account then clicking on Apple ID: Set.
Now if you want to make things more intertwined you and your wife can share your contacts, calendars etc with one another with read only or read write priveleges.

Can anyone solve this problem

hello everybody,
i am trying to write a online quize, and for that i used backend access and front end as servlet/jsp with
tomcat server,
and my program is working very efficiently on same computer, but when there are more than 15 or 10 to computer to access quize it goes
to long sleep to access next question (my page is one question in each page).
what to do for fast access or speed up for next question
can i used backend as mysql
or
anyother problem

Verify whether you have hardcoded "localhost" in any of your code. Also adding debugging statements helps narrow down the problem.
Amar.

My iphone 4 did not make call. It can receive calls, send and receive sms, internet is working. How can I solve this problem?

My iphone 4 did not make calls but I receive calls, send and receive sms, emails, etc. How may I solve it?

I am having the same problem with ios 4.3.5

I have set a passcode for my iphone and later I forgot it, and I tried it so many times but it was not correct now the iphone is disable it doesn't work in tune, can anyone solve this problem??

Similar Messages

Maybe you are looking for