I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...

I have set up my airprint wifi printer which works perfectly with the HP eprint app. However, when i view an email and click on the top right arrow button and select "PRINT" on my ipad nothing happens????...
Also, when im viewing websites and i find something i wish to print, same again, if i simply click on the print option at the top right of the screen nothing happens... the only way I can print is if i copy the weblink of the site page then click on my HP eprint app and paste the web link, then select print, it prints off fine.. but its it such a pain to keep copying and pasting links or screen dumping emails just to print...

Just to recap, this is a collection of ports I have collected over time for people who needed this information when setting up the HP ePrint app so that they could view their email from within the app.  I am certain other applications also need this information.  Although lengthy, I could not find a more comprehensive place to retrieve this information.  Feel free to post additional information, faulty information, or other related topics below as this is simply a collection of data and it would be practically impossible to test all of them. Thank you!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

  • I have an existing new belkin modem router which works fine with quite a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then ju

    I have an existing new belkin modem router which works fine with quiet a few wired and wireless products in my house. My question is if i buy a time capsule can i put it in another room and wirelessly connect it to the belkin modem router, I would then just like my macbook pro and (imac future purchase) to wirelessly back up to it???????????

    Your will need to perform a Factory Default Reset on the TIme Capsule to clear out the current network settings and then reconfigure it to "join" your wireless network using the AirPort Utility setup application.
    To perform the Factory Default Reset on the Time Capsule....
    Pull the power cord from the back of the device
    Wait a few moments
    Hold in the reset button on the back of the Time Capsule and keep holding it an additional 8-10 seconds while you simultaneously plug the power cord back in to the Time Capsule
    Release the reset button after the hold period and allow 25-30 seconds for the Time Capsule to restart to a slow, blinking amber light
    On your Mac.....
    Open Macintosh HD > Applications > Utilities > AirPort Utility
    Click Continue
    Follow the guided setup and choose the "join" option when it appears duriing the setup
    You will need to know the exact type of wireless security that the Belkin router is using to enter this information during the setup of the Belkin. Otherwise, the Time Capsule cannot join the network, and you will receive an error message after the configuration process.

  • When I click on the button to select a pdf to export, nothing happens.

    I have a subscription to Export pdf so that I can convert pdf's to word or excel. I have signed in, and I get to the page that states, "click on the button above to select a pdf to export. When I click on that button, nothing happens.

    Hi,
    Which web browser you are using, Kindly try any other web browser or update your flash player.
    Please refer to forum mentioned below:
    http://forums.adobe.com/docs/DOC-1831
    ~Pranav

  • Mac OS X update (3/19/13) crashes my iMac.  After installing an automatic OS X update, every time I use Adobe Photoshop Elements 11 to print to my Epson R1800 printer (which worked perfectly just before the update), my entire system crashes.

    On 3/19/13 I was printing photos on my Epson R1800 printer using Adobe Photoshop Elements 11 with no problems.  I got an automatic Apple OS X software update which I installed.  Ever since, when I try to print photos my iMac crashes.  How can I unistall the OS X update?

    What you are experiencing is called a Kernel Panic and is NOT caused by the OS, they can be difficult to troubleshoot as they can be software or hardware relate. The X Labs writes and excellent article about them, in Kernel Panics. Please read it carefully. In order to troubleshoot your KP you need to post your last KP log, Apple provides instructions for doing so in How to log a kernel panic. Please follow the instructions in that article and post your complete KP report.
    As mentioned previously it is NOT caused by OS X! There are common causes, including RAM issues, outdated applications, hard disks failing etc. By posting your KP log we can look at it and determine if it's software and if it is then point  you to what is causing the issue.

  • Lion mountain newest update :I loos the internet connection, but the network shows connected. And IPhone, IPad stay connected and work. Only the MacBook Pro , which worked perfectly before with Lion unless I updated to Mountain. I have tried everything.

    I have a MacBook Pro, Early 2011, 2 GHz Intel Core i7 which I udated some days ago with Lion Mountain 10.8.2. Before it worked just perfect. Now, since the update,  I loos the internet connection after a wile, (at the beginning every 20 sec, now up to 4 hours) even that the sign of the WiFi network connection shows to be perfectly connected.
    My other divices like IPhone, IPad stay connected and work. The rooter is new and cannot be the problem. I tried nearly everything I found on the bloggs, but nothing helped actually. It must be a softwear problem on Lion Mountain, what can I do?
    Thanks for any help

    I FINALLY SOLVED THIS ISSUE!!!!
    New routers have "mixed" modes for your network; this means that it will automatically choose the best option between wireless-B, wireless-G and wireless-N network modes. I used to experience this issue using the 2.4 GHz. mixed mode wireless network.
    Thankfully, my router can create 2 networks: a 2.4 GHz. network and a 5 GHz. network.
    When I randomly changed this value to "use only wireless-B and wireless-G" trying to fix an issue with a wi-fi expander, the iMac wi-fi  issue dissapeared! I tried it with wireless-N only, but it didn't work.
    So, finally, I have a 2.4 GHz network with only wireless-B and wireless-G modes which works PERFECT with the iMac, and a 5 GHz. network with a mixed* wireless mode for everything else mode.
    *PD: by "mixed" mode it means that the router will automatically choose between B, G and N network modes as it fits better.

  • Is there a way to print from ipad 4 to a non AirPrint printer? I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer. Is there an app for this or adaptors which could work?   thank, Ric

    Is there a way to print from ipad 4 to a non AirPrint printer?
    I have a Canon Pixma MP 620 wifi which works fine with my PC but I don't want to buy a new printer.
    Is there an app for this or adaptors which could work? 
    Thank, Ric

    Printopia is another option but be aware that since these solutions effectively act as a print server and AirPrint receiver, they require a computer to be running on the same WiFi network.
    Canon also has a couple of apps in the App Store that might facilitate this on non-AirPrint printers. Check out...
    Canon Easy-PhotoPrint
    Canon Mobile Printing
    PIXMA Printing Solutions

  • My newly bought i pad is not letting me doing anything. it is saying 'this ipad hasn't been backed up. backups happen when this ipad is plugged in, locked, and connected to wifi'. i have tried to powered off by pressing the top right hand button

    my newly bought i pad 4(4gs), ratina display, is not letting me doing anything. it is saying 'this ipad hasn't been backed up. backups happen when this ipad is plugged in, locked, and connected to wifi'. i have tried to powered off by pressing the top right hand button till the red slide comes up. but it is not sliding to the right. could anyone help me out??

    Locked, refers to the device being plugged in with "slide to unlock" being displayed on the screen.  To recap - your device will automatically back up to icloud when it is connected to power, the screen is locked, and it is connected to a wifi network.
    -Wifi is required to limit impact on your data plan.
    -Power is to ensure the device has sufficient power to perform the backup.
    -Screen lock - to make sure the device is not in use - which could slow or stop the backup.
    The initial backup may take some time.  Plug it in to the wall before bed, and make sure it is connected to your wifi network.  The backup SHOULD be completed when you wake up in the morning.
    Hope this helps.

  • How do I enable double sided printing on my iPad through the HP ePrint app?

    HP Laser jet 1102w
    I have Windows 7 64 bit and a original iPad.
    I would like to save paper when I am printing from my iPad. Is there a setting to enable double-sided printing when printing from an iPad using the HP ePrint app?

    Hi,
    Printing a manual duplex printing is not supported by the HP ePrint app or AirPrint as well, it can only be done with printers who provide automatic two-sided printing.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • I recently got a iPad camera connection kit hoping to directly download my photos from the memory card for my camera, a Sony Cybershot. When I put my memory card in the adapter and plug it in to the iPad nothing happens. What am I doing wrong?

    I recently purchased an iPad camera connection kit hoping to directly download pictures from my camera to my iPad. When I put my memory card into the adapter and plug it in to my iPad nothing happens.  My camera is a Sony Cybershot and the memory card is a Sony memory stick PRO duo 512 mb.  I don't think I am doing anything incorrect.  Is my camera/memory card incompatible with this adapter?

    The Camera Connection Kit works with SD cards, not Memory Sticks.
    Maybe you can find an MS to SD adapter, or use the USB connection with the USB cable that came with the camera.

  • I have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    i have an HP Photosmart Premium C410. It worked great with Mountain Lion, but it doesn't with Mavericks. Can't install any printing s/w even though it's on the network. Anyone know why????

    So, this post, as well written as it is, went totally ignored by the HP personnel that are supposedto be "helping" us poor novices? WOW! No wonder this crap gets thrown out of the house so often.
    I have two HP network printers. An HP Officejet 4500 G510g-m, and a HP Photosmart Premium C410a, and they are the most unreliable pieces of "equipment" that I have in my network. This is absolutely trhe crappiest bunch of junk on the market. The only thing worse than these "devices" is the support from HP for them.
    I also have a HP Photosmart C5280 AIO, and a Deskjet D2345 Printer. I have little, to no, problems with these two. The "flagships" of my network imaging are the worst, of the worst.

  • I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content

    I have a word document that I have put hyperlinks in and turned into a pdf.  When I email and receiver opens in iPad the document is blank.  When I do a file save as pdf the document appears and the hyperlinks work but the document has much of the content turned into symbols.  What is going wrong?

    You select the printer properties and set the appropriate page size (I think there is a place to set it in PDF Maker too, but not sure). In the printer, this is equivalent to putting the proper paper in the printer.

  • I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. Is it Lion?

    I have set up a Netgear dual band modem which works well with the iPhone and an older MacBook, but with this brand new MacBook it asks for a password every time I reopen the computer and open safari. As you can imagine this is very annoying. It says I am not connected to the internet and offers me a choice of nearby networks including mine and then asks for a password when I select it. Why does it do this with our new MacBooks (also with my son's brand new one) and not with the iPhone, iPad and older MacBook? They happily automatically connect to our network after entering the password just the once.

    Sig, I appreciate you trying to be helpful. I have no idea what issues you were having or what issue exactly pgrounds has been having. Your assumption that everyone's set up is the same as yours is false however. There are many many documented WiFi issues that are a result of Lion installs. Many have been solved by 10.7.1 and 10.7.2. Others have been solved by a large variety of work arounds. Others have not had their issues solved yet.
    I am one of those. I have an IT background, and I spent the better of five hours digging up workarounds and attempting all of them. For the benefit oh anyone who is having similar issues, I have posted links to all of those workarounds here. None of them worked in my case, but hopefully they will help pgrounds or others.
    So, once again, if you have a new idea, I'd love to here it. But if it has already been posted in one of these links, it's not helpful, let it go.
    http://osxdaily.com/2011/07/22/wifi-dropping-in-os-x-lion-fixes/
    http://osxdaily.com/2011/11/06/lion-wi-fi-problems-solution-mac/
    http://blog.chron.com/techblog/2011/09/want-to-really-repair-permissions-on-your -mac-try-this/

  • I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    I have had my apple tv 2 for about 3 months which work perfectly fine when I use it with my iPad 3 ー all of the sudden I get the HDCP Error!  I read the forms and done everything!  Apple I name a loyal customer, please come out with an update soon!

    That's one of the weird things.. it recognizes it maybe 10% of the time. And usually, only after I do the two-button reset. Problem is.. since it won't charge above 2%, anytime I try to do a restore or anything like that using iTunes, my device shuts off and I lose whatever progress I'd made.
    So, an update... after reading through a bunch of similar complaints (there are literally 1000's of them so there's NO WAY this isn't somehow ios7 related, thanks a lot APPLE ) I decided to try a restore in recovery mode. After 3 hours and several disconnections... I ended up having to just set it up as a new iPad, as the restore did nothing. Weirdly though... as I was doing the restore in recovery mode.. I noticed I'd gotten up to a 10% charge.. higher than it's been since September, so after setting it up as a new device, I turned it off and plugged it in using the wall charger. 2 hours later and I was up to 38%. Still not great, as my iPad, before ios7 could've fully charged twice in the amount of time it took for me to now get 28% more of a charge. And that's with a fully cleaned out device.. so that really ***** and I'm now more confused than ever.
    But I'm gonna leave it overnight charging and see what I come up with tomorrow. Sadly, when I paid $600 for it in February, I never expected to have to play "wait and see" with it...

  • I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

    I have two devices (Iphone and Ipad) on the same Apple ID. When I go to Icloud and click at the "find Iphone" I see only one of my devices. How can I do to see both of them?

    Obvious question, but have you got 'Find My iPhone' set on both devices?  Settings>iCloud>Find My iPhone.

  • I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift command V screen is still stuck

    I cannot start my mac book. Apple logo and spinning wheel on gray screen. Tried pressing shift key on start up nothing happen. Tried shift+command+V screen is still stuck

    Reinstall OS X without erasing the drive
    1. Repair the Hard Drive and Permissions
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    2. Reinstall Snow Leopard
    If the drive is OK then quit DU and return to the installer.  Proceed with reinstalling OS X.  Note that the Snow Leopard installer will not erase your drive or disturb your files.  After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.
    =======================================
    Reinstall - Mavericks, Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.
    Reinstall Mountain Lion or Mavericks
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

Maybe you are looking for

  • Add a row after Total row in ALV report

    Hi Experts, I have a report is displayed by  ALV format(not use function module to display it but use Class cl_gui_custom_container),I want to add a row after the total row. for example, Customer   amount1    amount2    amount3  10000         1,234  

  • Re: Out of memory NT 4.0

    Alvaro Martínez Alvarez wrote: <snip> We have modified the virtual memory (150 Mb, 500 Mb), and also modified the properties of the direct access with the -FM (n:30000, x:40000) parameter, but even with those changes the problem continues. <snip> I'v

  • Can't get embedding characters to work

    Hi I have to embed VAGRounded bold. I can't seem to get it to work reliably. I have created 4 dynamic text boxes, one for each of the 4 styles and embedded the characters into each one for the 4 versions of the font. I then wrote some text directly i

  • How to control the mesh tool?

    I am wanting to use the mesh tool but I need to know how to control my lines. I want a starting point and an end point but when I click the starting point is decided by me but the end point is decided on its own, and it is not the end point I want. I

  • Photoshop Elements 12 PC Download license transfer for Mac

    I recently purchased a PC download for Photoshop Elements 12 and I'm going to be converting over to a Mac. Can I just transfer my elements license to a Mac or what do I need to do so that I can use this on my Mac? Thanks in advance!