I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure
I have Snow Leopard ver.10.6.8 and I have uninstalled iwork, because I don't have the equation writer on pages. So I re install it from the iwork's disk and when I tried to open any of the Apps, the system told me " check with the developer to make sure Keynote (for example) works with this version of Mac OS X "
iwork was running in my computer just a few moment ago !
Can anyone tell me what can I do? thanks
So I re install it from the iwork's disk
Did you repair permissions and restarted your computer after the installation? Check SU?
Similar Messages
-
have Mozilla Firefox as my browser vs Internet explorer. This morning when I tried to open Mozilla after several attempts it said it had crashed with a window that I could check the box to send the report to Mozilla but it wont even let me send the report I can get on the internet with explorer but dont want to go back to that so would I just delete mozzila and start all over or will that not clear up the problem? Im lost help
Have you tried any of the solutions in [[Firefox crashes when you open it]]?
-
i have a problem with my Macbook Pro. When i tried to open it, something appeared : "enter your system lock PIN code to unlock this Mac". What should i do?
Question is did you lock your Mac from Find my iPhone using iCloud or is the Macbook really yours?
If you have in fact locked your Mac using Find my iPhone on iCloud then you will need to enter the PIN you have set when you locked the Mac.
*If you have not iniate the remote Lock then someone else has used your Apple ID and Password to lock your mac.
Message was edited by: Ammadz -
This morning when I tried to open my CC2014 Photoshop, it started to open, then quit suddenly. Same with Dreamweaver and InDesign. I am a professional and do not have the time to screw around with this. When I tried to run CC app, I get an error that says "Adobe creative cloud is needed to resolve this problem. However, it is missing or damaged. Please download and install a new copy of the Creative Cloud from 'http://www.adobe.com/go/adobecreativecloudapp'." I did so and tried to run the app and got the same error. I tried the cleaner and it removed all of my apps, then I tried to install again, and got the same error. I am getting desperate now, I have clients waiting for their projects. I need help, please.
Allisonf55952352 have you utilized the steps listed in Error: "Failed to install" | Creative Cloud Desktop to resolve the current error? If not do you have any questions regarding the steps listed with the document?
-
I have iWorks 9 that includes Pages 4.3. I created a document and saved it as a "pages" file. When I tried to open the document the next day, a dialogue box told me I needed a newer version to open the file. The information provided stated the new app would cost $19.99 and the customer ratings are quite low. Why can't I open a previously created document in iWorks, regardless of the version. This is the first time Apple has demanded that I pay for a new version to open existing documents.
I am with Peter on this issue. Additionally, if you installed the latest IOS Pages (v2.01) on an iPhone or iPad and opened a .pages file on iCloud that was created by Pages ’09 v4.n, or IOS Pages v1.7.n — that document is now in the new .pages file format and only Pages v5 on OS X can open it.
-
I have rented a movie on the iPad but I don't have enough memory for it to download - so I wanted to make it available on my Apple TV - looking at the FAQ it doesn't look like I am allowed to do this! Why not - I've purchased/rented this movie I should be able to watch on any device??! Can I get a refund for something I can't watch??
As it says on the page that you posted from :
If you download a rented movie on your iPhone 4 or later, iPad, iPod touch (4th generation or later), or Apple TV: It is not transferable to any other device or computer.
Why it's like that I don't think that Apple have said (these are user-to-user forums). If you haven't downloaded it on your iPad then have you checked to see if you can download it on your computer's iTunes (Store > Check For Available Downloads menu option) or Apple TV ?
If it doesn't show on either of them then you can try contacting iTunes Support and see if they will let you download it on a different computer/device or refund or credit you : http://reportaproblem.apple.com
If the 'report a problem' link doesn't work then you can try contacting iTunes Support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page -
If i still have snow leopard...will i be able to get mountain lion or will i have to buy lion first ???
chef261 wrote:
If i still have snow leopard...will i be able to get mountain lion or will i have to buy lion first ???
Check first if your Mac might be compatable.
http://www.cultofmac.com/146957/mountain-lion-kills-os-x-support-for-a-number-of -macs-heres-the-list/
Good Luck
Pete -
I just upgraded OS from 10.4.1 to Snow Leopard 10.6.8. Now when I tried to open Reason 4 it asks for me to insert a disc and prompts me to enter my ID for permission. What can I do?
First off, you can't have upgraded from 10.4.1, as that won't run on a MacBook. 10.4.4 is minimum. 10.4.10, and 10.4.11 are different from 10.4.1.
Secondly, it appears Reason 4.0.1 is needed for 10.6:
http://www.propellerheads.se/products/reason/
There may be other upgrades on:
http://snowleopard.wikidot.com/
Check with the developers in question if they are aware of any bugs in the upgrade process. -
Firefox hangs on opening requiring force quit I have snow leopard Mac It even hangs when I try safe mode. I need to know how to remove all traces of firefox on my mac so I can reinstall. I have tried terminal as advised on firefox webpage. Please advise me
== This happened ==
Every time Firefox opened
== I tried to update firefox add-ons ==
== User Agent ==
Mozilla/5.0 (Macintosh; U; Intel Mac OS X 10_6_3; en-us) AppleWebKit/531.22.7 (KHTML, like Gecko) Version/4.0.5 Safari/531.22.7Try a new profile. See [[Recovering important data from an old profile]]
-
I have purchased and used Adobe Products for 25+ years and I own CS6 Design Standard outright.
I had previously subscribed to Adobe Creative Cloud but did not renew the annual subscription.
The CS6 Design Standard serial number is listed in my Adobe user account. I have run the the Adobe Creative Cloud Cleaning tool, uninstalled the Adobe Creative Cloud App and all other CC apps from my iMac. I reinstalled fresh copies of the CS6 software two different times, first from my CS6 DVD disk and then from the Adobe Download page. During each installation of CS6, all seemed to run normally and I was prompted to enter the license number and it was accepted. However, when trying to open the software after completing the installation, I am being prevented from doing so without renewing the Creative Cloud subscription.
Who knows of a solution to this problem?
Contacting Adobe’s Chat support and Customer Support portal has not resulted in a solution, even though they have confirmed the license number as being accurate and linked to my account. After weeks of waiting on their responses, yesterday I was told to go to the Forums to find a solution….Please Help Me….ThanksI am not familiar with the process involved with the link I am providing so please accept my apology if it is a repeat of something you have already tried...
How do I prevent Creative Cloud from taking over my CS6 perpetual license?
https://forums.adobe.com/thread/1584746 -
Prety much what the question says. HELP!
stephenfromlynchburg wrote:
No the mac had come with Leopard. Then I bought the snow leopard DVD and did a clean install of snow leopard.
If you just stuck the disk into the Leopard Mac and run the upgrader, you didn't do a "fresh install" you basically upgraded from 10.5 to 10.6 leaving all the programs and files intact.
The white Snow Leopard disk was the right one for that machine as it had Leopard (10.5) on it previously.
So you already have Snow Leopard installed, if you want to erase the entire drive (along with all your programs, files and OS X) and want to install Snow Leopard again, you hold the c or option/alt key down and boot the machine off the disk. Then use Disk Utiltiy to erase the entire drive, then quit and install Snow Leopard.
How to erase and install Snow Leopard 10.6
Once Snow Leopard is installed you log in and use Apple Menu > Software Update until clear to get to 10.6.8 and fix security issues.
Now I can't get it to do the install again.
To install Windows into BootCamp, you read and run the BootCamp Assistant located in the Applications > Utiltiies folder
It's important to change the drive format from FAT32 to NTFS before installing Windows using the Windows disk.
Windows is rather complicated to install, if you boot to a blinking line with "press any key to continue" you need to press and hold the power button down and reboot holding the Option/Alt key down to get back into OS X.
https://www.apple.com/support/bootcamp/
If your Windows programs are not going to be as CPU/GPU demanding, you may rather prefer to use a virtual machine instead
Windows in BootCamp or Virtual Machine? -
after trying to restore from time capsule, I get the following message when I try to access the folder "data": "The folder “Data” can’t be opened because you don’t have permission to see its contents." Any ideas?
Are you restoring from a TM backup??
Check the methods Pondini outlines to do restore.
Q14-17
http://pondini.org/TM/FAQ.html -
I've installed Snow Leopard on existing iMac. I backed up on a 1TB external HD but when opening any folder from that HD I receive the error: 'The folder i can’t be opened because you don’t have permission to see its contents'.
Any help very gratefully received!Select it and open the Info dialog. In the Sharing & Permissions section, you should have read & write access, and everyone (else) should have read access. If that's not the case, click the lock icon, authenticate, and make the necessary changes. Close the window and try again.
-
I have used Final Cut Pro 7 for about a year. Two weeks ago when I tried to open it, it opened for 15 seconds and then the icon disappeared. I have tried to reinstall and it didnt help. any one has similar case or can help?
Please post your problem in the Final Cut Studio (Final Cut Pro 7) forum:
https://discussions.apple.com/community/professional_applications/final_cut_stud io?view=discussions
You'll get the help you need in that forum. -
When I tried to open itunes I was informed files were missing and I needed to reinstal . I have attempted to do this but keep getting fault messages. Any idea's please
C:\Users\paphos203\Downloads\iTunesSetup(2).exe.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator.
C:\Users\paphos203\Downloads\iTunesSetup(4).exe.part could not be saved, because an unknown error occurred.
Try saving to a different location
Maybe you are looking for
-
Hi, I am trying to get the SOAP Adapter in the PCK running, but always get an error while sending a SOAP message to the adapter. I configured the send adapter as described under help.sap.com and when I try to check the availability of the channel by
-
Problem exporting uncompress AVI
Problem exporting uncompress AVI. The output file will have in-between frames that appear like this: Help!
-
Transform an XMLType using xslt
Hi, I have a table where I'm saving xslt programs using XMLType and I want to use the xslt document(); function to refere to xml data stored in an other table using XMLType Exemple : CREATE TABLE STYLSHEETTABLE ID INTEGER, XSLT SYS.XMLTYPE CREATE TAB
-
Post Author: ehmd CA Forum: Migration to XI R2 I need to upgrade a Crystal Reports Server XI installation, which came with Crystal Reports Developer XI, to Crystal Reports Server XI R2. I cannot find any upgrade for Crystal Reports Server XI R2 on th
-
Hi all I was wondering if there is any way that i can turn a job ON and OFF through JavaScript in the web page of a production line monitor page... Best regards Tks in advance