I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

Hi miffyzoo,
If you are having bluetooth pairing issues with your iPhone and your Mac, you may find the troubleshooting steps outlined in the following article helpful:
iOS: Troubleshooting Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Similar Messages

Does the Mac Mini have some issues with USB mics?

Hi there,
I've been having issues getting my Mac Mini to register my Logitech usb headset. I originally thought it was an issue with Mavericks, but when I tested the headset on my friends Macbook, it works fine. I tried using my iPhone headphones in the headphone slot, and it picks up my voice fine. The Logitech headset is suppose to be Osx friendly, but is there something I'm missing and does anyone know why my logitech headset is not working with my Mac Mini properly?

For some Logitech devices you need drivers, for others you don't. Call Logitech support to find out if that one has been tested with 10.9.

Have some issues with Iphone

Need help

This has got to be one of those days. It goes along with the earlier post about how to get rid of the "E"

I have the issue with the sound going on my iPhone 4s I have tried everything undocking it works for a short period then it starts again phone out of warranty so Apple what do I do

The sound keeps going on my iPhone 4s ringer continues to work when volume buttons are pressed the word ringer comes up but none of the indicator blocks for volume level tried all the fixes undocking from PC works for a while then it happens again but phone not in warranty so Apple what's the fix

IF you are getting no messages period - not just no iMessages - then it is very likely a carrier issue. It is AT&T and not the phone. SMS travels via the carrier wave used to make phone calls - iMessages use data and go through Apple servers as you know
If you are getting no messages at all - then I wonder if your cell service is ok or if you are in an area of strong signal - then does your SIM card need to be looked at

Som issues with Nvidia GTX960 - dmesg error output posted

I have some issues with icons not showing up, eg. in pamac. Just red crosses or what it's called.
Here is my dmesg error output.
$ dmesg --level=err,warn
[ 0.000000] ACPI: RSDP 0x00000000DD7F6000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000DD7F6080 00007C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DD8041A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DD7F6198 00E009 (v02 ALASKA A M I 00000031 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DDD45080 000040
[ 0.000000] ACPI: APIC 0x00000000DD8042B8 000092 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DD804350 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: LPIT 0x00000000DD804398 00005C (v01 ALASKA A M I 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD8043F8 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD804938 000AD8 (v01 PmRef CpuPm 00003000 INTL 20091112)
[ 0.000000] ACPI: MCFG 0x00000000DD805410 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DD805450 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DD805488 00036D (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000DD8057F8 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000DD808D38 000038 (v00 ALASKA A M I 01072009 AMI 00010013)
[ 0.006274] ACPI: All ACPI Tables successfully acquired
[ 0.014978] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.014978] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.016204] Ignoring BGRT: invalid status 0 (expected 1)
[ 0.102300] #2 #3 #4 #5 #6 #7
[ 0.263542] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.265355] ACPI: Dynamic OEM Table Load:
[ 0.265358] ACPI: SSDT 0xFFFF8807FA42A800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20091112)
[ 0.265733] ACPI: Dynamic OEM Table Load:
[ 0.265736] ACPI: SSDT 0xFFFF8807FA419800 0005AA (v01 PmRef ApIst 00003000 INTL 20091112)
[ 0.266134] ACPI: Dynamic OEM Table Load:
[ 0.266135] ACPI: SSDT 0xFFFF8807FA46DA00 000119 (v01 PmRef ApCst 00003000 INTL 20091112)
[ 0.267060] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150204/hwxface-580)
[ 0.267063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150204/hwxface-580)
[ 0.285136] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.793801] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794140] ata1.00: supports DRM functions and may not be fully accessible
[ 0.794388] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.794391] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 0.795480] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20150204/psargs-359)
[ 0.795482] ACPI Error: Method parse/execution failed [\_SB_.PCI0.SAT0.SPT5._GTF] (Node ffff8807fe0d19b0), AE_NOT_FOUND (20150204/psparse-536)
[ 1.018384] usb 3-3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.018386] usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.040606] systemd-journald[181]: Failed to set file attributes: Inappropriate ioctl for device
[ 1.114596] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 1.230333] nvidia: module license 'NVIDIA' taints kernel.
[ 1.230335] Disabling lock debugging due to kernel taint
[ 1.235547] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 352.21 Tue Jun 9 21:53:31 PDT 2015
[ 2.072087] NVRM: Your system is not currently configured to drive a VGA console
[ 2.072090] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 2.072091] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 2.072091] NVRM: drivers including, but not limited to, vesafb, may result in
[ 2.072092] NVRM: corruption and stability problems, and is not supported.
My hardware is a desktop with i7 4790K (4 cores with HT enabled) ASUS Z87-K motherboard, 32 GB Corsair 1600 MHz RAM. Samsung 850 PRO 1 TB SSD.
My inxi -F
System: Host: archie Kernel: 4.0.5-1-ARCH x86_64 (64 bit) Desktop: Xfce 4.12.2 Distro: Arch Linux
Machine: System: ASUS product: All Series
Mobo: ASUSTeK model: Z87-K v: Rev X.0x serial: 130612439103584
Bios: American Megatrends v: 1402 date: 11/05/2014
CPU: Quad core Intel Core i7-4790K (-HT-MCP-) cache: 8192 KB
clock speeds: max: 4400 MHz 1: 4000 MHz 2: 4002 MHz 3: 4000 MHz 4: 4000 MHz 5: 4256 MHz
6: 4001 MHz 7: 4002 MHz 8: 4002 MHz
Graphics: Card: NVIDIA GM206 [GeForce GTX 960]
Display Server: X.org 1.17.2 driver: nvidia tty size: 108x41 Advanced Data: N/A for root
Audio: Card-1 Intel 8 Series/C220 Series High Definition Audio Controller driver: snd_hda_intel
Card-2 NVIDIA Device 0fba driver: snd_hda_intel
Sound: Advanced Linux Sound Architecture v: k4.0.5-1-ARCH
Network: Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
IF: enp3s0 state: up speed: 1000 Mbps duplex: full mac: <masked>
Drives: HDD Total Size: 1024.2GB (4.4% used) ID-1: /dev/sda model: Samsung_SSD_850 size: 1024.2GB
Partition: ID-1: / size: 48G used: 13G (27%) fs: ext4 dev: /dev/sda3
ID-2: /home size: 769G used: 154M (1%) fs: ext4 dev: /dev/sda4
ID-3: /boot size: 511M used: 25M (5%) fs: vfat dev: /dev/sda1
ID-4: swap-1 size: 33.55GB used: 0.00GB (0%) fs: swap dev: /dev/sda2
Sensors: System Temperatures: cpu: 29.8C mobo: 27.8C
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 172 Uptime: 10 min Memory: 1133.0/32119.5MB Client: Shell (sudo) inxi: 2.2.25
Have I missed something to post?
Last edited by dockland (2015-06-17 20:30:48)

I read that this line in my case
[ 1.115441] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
is a bug and unfixable.
What does that mean and why is it "unfixable"? Is that some hardware that is not compatible with Arch at all?

Some issue with appstore and software update

Hi all,
I have some issues with app store and software update.
Sometime App Store report that it was available software update for Mac OS X ML. When I enter in App Store to upgrade something goes wrong and I cannot do anything.
If I close and open again App Store, it start to look for update and aftware 5-10 seconds App Store reports that there aren't update available.
I take a look in /var/log/install.log and I found this:
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/03/60/041-5259/K4G5rj8jSCBBxxxLM2XHpjPJdGspgBHzFX/041-5259.English.dist.gz: Host cert invalid or otherwise insecure download
Jun 4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/32/52/041-5688/9zts9cfPJssQJdHBjQ2TFM5yxSgqwrT6rM/041-5688.English.dist.gz: Host cert invalid or otherwise insecure downlo
Jun 4 01:40:54 XXX.local Software Update[6741]: Failed Software Update - trust evaluation failed in SecTrustEvaluate with result: 5
Jun 4 01:40:54 XXX.local Software Update[6741]: Can't load distribution from https://swdist.apple.com/content/downloads/21/24/041-5260/876hzpgDST2NBNK2LKmjpPBhDwrL94sJ9x/041-5260.English.dist.gz: Host cert invalid or otherwise insecure download
Jun 4 01:40:54 XXX.local Software Update[6741]: Removing package source SUContentLocatorPackageSource from manager
Any ideas?
Thanks
Regards

Back up all data.
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be an item named System. If not, select
File ▹ Add Keychain
from the menu bar and add the following item:
/Library/Keychains/System.keychain
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu at the top, select
When using this certificate: Use System Defaults
Close the inspection window. You'll be prompted for your administrator password to update the settings. Revert all the certificates with non-default trust settings.
From the menu bar, select
Keychain Access ▹ Preferences ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out, log back in, and test.

Why does my iPhone 4 Bluetooth just keeps saying "Searching" but won't show devices.

When I go to my bluetooth settings, it says it's in discoverable mode & just keeps searching and not popping up any devices. I have iOS 7.0.2. I'm trying to connect my bluetooth headphones.

I even tried to use bluetooth connection on both my parents' iphones, it just keeps saying "searching".

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies

I am experiencing some major problems with my MacBook Pro. I have had some issues with it turning on/off at random times, but today, when starting, I get the grey start-up screen and a recovery bar. After filling in approx 1/4 of the way, the machine dies. After starting it in recovery mode, it will not allow me to download OS X Mavericks- it says the disk is locked. Any ideas? I do not have a back-up and do not want to erase everything before I have explored my options. Help?

try forcing internet recover, hold 3 keys - command, option, r - you should see a spinning globe
most people will tell you to do both pram and smc resets (google) and if you still have issues, either clean install (easy) or troubleshoot (hard)

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

I have a issue with my mac book pro. For some reason it won't stay powered on. I can't get past the apple loading logo. The battery is fully charged so it is not the problem. Can anyone tell me what the problem may be and how can i get it resolved?

The battery is fully charged so it is not the problem.
What happens when you use the MagSafe?

I have an issue with some PDF documents some MS Office documents, notably MS Word when received in eMail as attachments not displaying on iPhones, iPad 2s

Hi,
I have an issue with some PDF documents & some MS Office documents, notably MS Word when received in eMail as attachments not displaying properly on iPhones, iPad 2s & new iPads?
PDF docs - areas of the doc only show as grey splotches regardles of viewer
MS Word Docs -
inserted graphics don't display at all,
tables & lists especially with borders are broken &
tables & lists missing the borders &
tables & lists missing the 1st 1-2 lines of the lists/tables.
This is replicated on iPhone 4s, iPhone 4Ss, iPad 2s, iPad new (x2)
It certainly happens in iOS 5.1.1 & iOS 5.1
We believe it all worked aok in iOS 5.0.1(?) & prior
There is no problems reading/seeing these PDF & Word docs on anything other than iDevices.
This is rather critical for us & if not quickly fixed/rectified will prevent us from further purchases of these devices
Rolling back to iOS 5.0.1 or prior I believe isn't possible because of the BaseBand update(?) & isn't much of an option because of the quite noticeable Battery/Charging/WiFi improvements in 5.1 & 5.1.1

Hi,
I logged a call with AppleCare & have since had explained why this occurs (some time ago)
I'll try to explain what was indicated to me.
iOS has a limited Font Set & this affects what PDFs can display. You need to use iOS supported fonts in your PDFs to see/read them properly
These supported fonts are indicated here => http://support.apple.com/kb/HT4980
Regards MS office docs, iOS doesn't have much of an API to work with MS Office documents at all so is stuck with 3rd Party Apps to try to do it.
Unfortunately Mail in/on iOS uses the API to attempt to open/use MS Office attachments unless you tell it to use an App to open the attachment.
I have had success opening & reading MS office docs now with CloudOn, but find it slow & very awkward to use.
Not too sure if this helps others, but at least it explains why this is occurring

Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes. I think there is some issue with tunes new version .kindly support ASAP. Ra

Hi support please help me to sync my ipod and iphone 5 . Since i have installed new itunes version 12 , i am not able to sync to transfer data to my devices through itunes.
I think there is some issue with tunes new version .kindly support ASAP.
Rachna khanna
[email protected]

you might need to buy a new cable from the apple store.

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

I started to have connectivity issues with a linksys router. The linksys rep suggested ...Check from Apple if they have some particular ports for the Apple TV that we might need to open on the router, anyone have any suggestions for this?

Hi RonWM,
Thanks for visiting Apple Support Communities.
This article lists the ports that are used by the Apple TV:
Apple TV: TCP and UDP ports and protocols used
http://support.apple.com/kb/HT2463
Best Regards,
Jeremy

We have been having some issues with Email notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

What version of Solman are you using ? Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1 else in 7.01 you use auto reaction methods to monitor .
Regards
Jay

Withh some issues with itunes I removed then reinstalled itunes. Now it tells me "We could not complete your itunes store request. An un known error occured" Anyone have this problem?

With some issues with itunes, I uninstalled then reinstalled itunes. It now Gives me the message "We could not complete your itunes store request. An unknown error occured"

"Error 42023" through "Error 42408"
These alerts might occur when trying to authorize iTunes or during launch when iTunes checks for authorization information.
Install the latest iTunes from apple.com/itunes/download/
Remove the SC Info folder.
If that does not resolve the issue, see iTunes: "Error 42408" or "Error 42404" after upgrading to iTunes 9.0.3.
http://support.apple.com/kb/TS3297
http://support.apple.com/kb/TS3297Also see the applicable previous discussions listed on the right side of this page under the heading More Like This.

I have three issues with Creative Cloud

I have three issues with CC:
1. I want to be able to EDIT my work when I don't have income. The desktop model supported this. The cloud model does not, and that is unacceptable.
2. Adobe can keep raising the price, because they will be holding us all hostage. Sure at some point a percentage of CC users would drop off, but all that means is that Adobe can milk the absolute most from us using this model. It's not a vehicle for innovation, it's a vehicle for exploitation.
3. F--- the cloud. I'll be keeping my work on my laptop, thank you very much.

what's your home version (click help>about) and was that just a warning so you were able to open the file?

I have some issue with my bluetooth im using an iphone 5 its just keep on searching bluetooth devices it cannot detect other bluetooth device, any solutions to my problem?

Similar Messages

Maybe you are looking for