I have some problems and queries on Q10 ...

Good morning ...
First, BBM very bad design, and the blue color of the broadcast very tired of the eye , and device does not vibrate when you work Ping!!! .
Second, Android applications that are supported by BlackBerry 10 does not work well and often cause a lot of problems.
Finally, we await descent of a new update to the Software 10, taking into account the support of more fonts, and more applications, and support the Arabic language more, and attention from RIM.
thank you...

Try reset
Reset: Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Note: You will not lose any data
If no joy, restore backup using iTunes.
Finally last attempt, rsetore as new and sync content back manually.

Similar Messages

  • My iPhone 5 the speaker probably doesn't work, I feel upset because my friends said to me don't buy it because the software of iPhone 5 have some problems and I didn't listen to them , now I would like to see how apple will help me !!!!!

    The speaker of my iPhone 5 probably doesn't work and I don't know the reason although some of my  friends said to me don't buy it because the software of iPhone 5 have some problems but I didn't listen to them

    Check this support document for SIM issues http://support.apple.com/kb/TS4148. No one here is Apple, we are users like you. We can only recommend you try Apple again, unless you are close to an Apple store and can make an appointment to go in there.

  • Firefox have some promlems and it block when is opeining hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    Firefox have some problems and it block when is opening hotmail, in my laptop always have that problem, so i need check my email using another programs...that problem is in my laptop or it´s a problem of navigator??

    I know you can't help with my Yahoo problem, however, apparently at some time in the past I have went to the Sync and tried to figure it out on both my laptop and my desktop, because I have the long snyc key information. However, when I go to try to sync both computers I never get the box to enter that key on either one. That is my problem. So should I try and get a new sync key and see if that works.

  • Some problems and questions

    I have some problems and questions about my MSI MEGA PC 180 system...
    One problem is that MSI live monitor only works one time after every new installation then is just say "The URL is invalid" every other time I try to search for updates.
    One problem is that one of the fans  doesn't turn off when I turn of the computer and the only way to get i to turn off is to turn on the hifi mode and turn it off then the fan stops. And some times the fan can start after a while when the computer has been turned off.
    There are two fans for the cooling of the CPU but PCALERT only shows the speed of one of them.. why? according to the manual one of the is called CPU fan and the other one is called sysfan but only CPU fan showes i PCALERT.
    Are there no other way to control the Tv other than with the Home Teather system than I find way to slow if you use 1280x1024 resolution on the screen like I do. And are there no way to sort and remove channels in home teather? As i is now I can't move the channels in the order I want and I can't remover channels that the auto search thaught was channels but aren't?
    An other thing that I find annoying is that the fullscreen mode of home teather doens't cover all off the screen it doesn't hide the systray and leaves a small but annoying kolumn to the right that showes the backgrund and that is very annoying to watch tv if you have a light backgrund because the kolumn are so bright.

    Welcome Kabbo,
    I see you agree that MC III is far from perfect. Perhaps you can try the combination of Media Portal and Ir2Key. Just read some of the other posts including "WinIRX.ocx internals/usage" by ddookie.  Another possibility is to try Dscaler, but this program is only for watching TV.
    Regarding the processor fans: its normal that only one of the two shows up in PcAlert; when you look closely to both fans you'll see that one has only a two-wired connection.
    The problem of a fan not shutting down is new to me, I suppose you have checked the connections to your mobo?
    Greetz,
    JaDi

  • Hi! Everyone, I have some problems with JOIN and Sub-query; Could you help me, Please?

    Dear Sir/Madam
    I'm a student who is interested in Oracle Database and
    I have some problems with JOIN and Sub-query.
    I hope so many of you could help me.
    if i use JOIN without sub-query, may it be faster or not?
    SELECT field1, field2 FROM tableA INNER JOIN tableB
    if i use JOIN with sub-query, may it be faster or not?
    SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
    Thanks in advance!

    Hi,
    fac30d8e-74d3-42aa-b643-e30a3780e00f wrote:
    Dear Sir/Madam
    I'm a student who is interested in Oracle Database and
    I have some problems with JOIN and Sub-query.
    I hope so many of you could help me.
    if i use JOIN without sub-query, may it be faster or not?
    SELECT field1, field2 FROM tableA INNER JOIN tableB
    if i use JOIN with sub-query, may it be faster or not?
    SELECT field1,field2,field3 FROM tableA INNER JOIN (SELECT field1,field2 FROM tableB)
    Thanks in advance!
    As the others have said, the execution plan will give you a better idea about which is faster.
    If you're trying to see how using (or not using) a sub-query affects performance, make the rest of the queries as similar as possible.  For example, include field3 in both queries, or ignore field3 in both queries.
    In this particular case, I guess the optimizer would do the same thing either way, but that's just a guess.  I can't see your execution plans.
    In general, simpler code is faster, and better in other ways, too.  In this case
    tableB
    is simpler than
    (SELECT field1, field2  FROM tableB)
    Why do you want a sub-query in this example?

  • I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

    I need advise and help with this problem .
    First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
    At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
    In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
    Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
    trace in Spotlight , Library . Nothing could be find .
    Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
    ''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
    With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
    I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
    Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

    Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
    To remove it, see:
    http://www.thesafemac.com/arg-genieo/
    Do not use the Genieo uninstaller!

  • I have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    i have some problem with my computer because when i turn it up, the screen turns in a blue colour and the sound doesn't work and in this way i can't hear anything

    Will u help me or not?

  • I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

    I have some problem when I want to download app in iTunes some security question ask me about my visa when I right my visa number I got an errors and on top of the page told me go to iTunes support I do these things and now what should I do

    Most of the people on these forums, including myself, are fellow users - you're not talking to iTunes Support here.
    You can contact iTunes Support via this link : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...

    Can i install Illustrator CC with Photoshop CS6 and Indesign CS5.5 or can i have some problems of compability? I use Windows 7. Thank u...

    Generally this should work, but of course there may be occasional compatibility issues across the different programs and their different versions.
    Mylenium

  • Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it

    Hi guys. i have some problem with a link from a pdf on-line,when i click on it,the page adds a "%" at the and of the link and says "page not found" because of it.
    This happens only when a load my pdf file on my server, because if i click on the link when the file is on my iPad, the page opens without problem.
    Any help please?
    thanx

    the % sign is often used when there's a space in a name. HTML doesn't like spaces so it fills them with % or %20
    try, on the end of that link, see if there's a space built into the page or the link when the page was made
    On the web address you may be able to 'backspace' at the end and erase that space to get the address, but whomever made the page possibly put a mistake in the link

  • I have one problem and I think it is a settings issue. When I google the web I get results. Now, when I visit some website and I return to my search results I don't have any markers (diffrent link colour for visited sites in IE).

    Question
    I have one problem and I think it is a settings issue. When I google the web I get results. Now, I visited some website and then I want to return to my search results and pick another search result. And there is a problem: I don't have any markers (diffrent link colour for visited sites in IE) that would help me to distinguish visited and not visited sites.

    Why start a new and very similar thread to your other one which you have not responded to (have you read the replies?)
    I suggest that no response is made to this duplicate thread. 

  • HT203433 my issue is that my itunes store have some problem i cannot update my app and i also purchase app or download free app on it . it keep on tell me that ;an unknown error occured (0x800b0101)

    my issue is that my itunes store have some probleme i cannot update my app and purchase app or download free app also it keep on tell me that an unknownerror occured (0x800b0101)

    You could try this.
    Back up all data.Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
    Right-click or control-click the line and select
    Services ▹ Reveal
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Credit for this solution to ASC member luis.pinhor.

  • HT2534 hii i am using iphone 3g mobile i have some problem in downloading free apps    here is asking an credit card details    so i want to download with out entering credit cards details      and here i have there is not havening an option "NON"

    hii i am using iphone 3g mobile i have some problem in downloading free apps    here is asking an credit card details    so i want to download with out entering credit cards details      and here i have there is not havening an option "NON"

    How did you create the account ? Unless you followed, exactly, the instructions on the HT2534 page that you posted from when creating an account then credit card details will need to be entered before the account can be used to download any item from the store.

  • I have some problems with element Panel Label and Message.

    I have some problems with element Panel Label and Message. When I create form from VO attributes then I have Label for input text element. If I use Panel Label and Message element then I need to copy LABEL from input text element to Panel Label and Message element LABEL PROPERTY. Can I define in View object that I don't need label and want all attributes in Panel Label and Message element?
    BEST REGARDS

    You can simply remove the label attribute for the input text on the page.
    sid

  • I have iphone 4 and have never updated itsince i've bought it. now i would like to update it to iOs 7. maybe can i have some problems in doing this due to the fact that i've never updated it until now?

    I have iphone 4 and have never updated itsince i've bought it. now i would like to update it to iOs 7. maybe can i have some problems in doing this due to the fact that i've never updated it until now? thanks in advance for every reply

    Did you follow this article to update your phone?
    iOS 4: Updating your device to iOS 5 or later
    iOS: How to update your iPhone, iPad, or iPod touch
    If your device has modified software installed (jailbreak), you might get problems using the phone after updating it.

Maybe you are looking for

  • External monitor resolution in Vista on MacBook Pro

    I am running Vista Ultimate on a MacBook Pro. I have a Dell 24" external monitor plugged in, which supports a top resolution of 1920 x 1200. But Vista thinks it's a generic non-PnP monitor with a top resolution of 1024 x 768. I have installed the Win

  • Windows 7 SP1 client file lock on network share hosted ny WIndows 2012 Server

    Hello I have one strange problem after migration from Windows 2003 Server to Windows 2012 Server R2 Standard.  All migration tasks went well but two things do not work. In Computer Management you have The Opened Files feature and if you open any file

  • MacBook Pro Target to G4 Blue & White (350Mghz)

    Trying to target my old G4 to use hard drive as file back up from MacBook Pro - but it doesn't seem to be targetable or recognize a targeted CPU - any suggestions? Wireless connection too slow...

  • How to set up so that 1920 x 1080  h.264 files don't need to be rendered when importing onto timeline

    Is there a way to set up final cut express to default to the proper settings so that 1920 x 1080 h.246 mov files don't have to be rendered when dropped onto the timeline? It is really not efficient to work on something when it takes hours to render.

  • Doubt in LO

    Hi all, I have the following questions in LO extraction. 1. when exactly is the set up table created ? Is it during activation of the extract structure or during something else ? 2. In LBWG, we enter the application number say '11' for 'SD' for delet