I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Similar Messages

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • I have some questions about student versions of software.

    I am creating a website for my business, and I need Photoshop CS2 and Dreamweaver 8 right now. But I know that CS3 should be out soon, and it will be Universal. If I get the student versions now, can I upgrade them or will I be forced to buy the versions again? What is my best option? Thanks.

    For that you would need to ask the vendors.

  • Some questions regarding CO-PA

    Hello Experts,
    I have some questions regarding de COPA module:
    1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
    2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
    3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
    Thnak you for your support!
    Leandro.

    Hi,
    a) VKOA transaction
    b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
    c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
    Regards,
    Eli

  • Clean installing Lion- have some questions.

    I'm gonna clean install Lion on my macbook pro and have some questions regarding the same...
    should I update to 10.7.2 and then clean install or will i have to update again anyway after a clean install?
    is it true that downloading mac app store apps again from the app's page reincurrs the charges?
    any best/worst practices i should consider while reinstalling Lion? I'm gonna perform a clean install.
    most important... how do i initiate a clean install?!
    Thanks for your time, in advance.
    Neerav

    Thank you, that definitely suggests that it isn't actually doing anything useful!
    I switched it off, cleared the PRAM and re-formatted the drive unencrypted (I found the option, it was in the dropdown for filesystem).
    That appears to have been the issue, as the download and install immediately identified the disc name, which it wasn't doing before. Guess it was having an issue with my encrypted drive. I guess it's handy I'm not a secret agent or an political dissident I shall run unencrypted...

  • I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?

    I will address your second question.
    First, make sure your iPhone and iPad have absolutely identical Apple IDs.  If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option.  Lo and behold, all your iCloud notes should appear on your iPhone.

  • Some question regarding time evaluation

    Hello,
    I have two questions regarding time evaluation:
    1. Is it possible (if yes, how) to still include a employee in time evaluation even if this employee is inactive (status P0000-STAT2 = 0). We need this in order to calculate weeks of not working (this has to be calculated). I know that for payroll this is possible wih a setting in infotype 0003.
    2. Is it possible (and how) to read data back from payroll into time. For example in payroll you export something to ZL table, can you then pick this up in time evaluation schema, as there is also ZL table. Or is there another way to do this?
    Thanks for you answers,
    Liesbeth

    hi Schrage
    Why you want to evaluate the time for inactive person.
    If you want you can do.
    Process :
    First of all you have to group your employees. and sub groups.( for inactive emp)
    Assign the employee sub group grouping for PCR in Basic Pay ( IMG ).
    Then come to Time Evaluation Schema. Put the Day grouping nn nn nn nn in the Parameters. and run the time evaluation. You will get the output in DZL table.
    For the above process you need to configure the T510S table.
    Yes you can read the payroll into time.
    the same concept will run in both of the modules.
    the output should appear in the ZL table only.
    Here the concept is.....Some companies, they will not use the payroll wage types. only they will use the time wage types.. these wage types has to be configure in the T510S. and we have to do the wage type copying from the part of time management only if they are not using the payroll. So either in Payroll or in Time management the evaluation of time willbe the same.
    Cheers
    Vijai

  • I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought.

    I have a question regarding my txt/alert tones. I recently updated my iPhone 5's software without first backing it up on iCloud or my computer (oops). After my phone finished updating, i lost the new ringtones and txt/alert tones i had bought. I connected my iPhone to my computer and sync'd it hoping that it could download my purchases from the itunes store and then put them back on to my phone but no such luck. When i look at my iphone on my computer and look at tones, they do not show up at all. However, if i click on the "On This iPhone" tab and click on "Tones" the deleted ringtones and altert tones show up...they are just grey'd out and have a dotted circle to the left of them. I also tried to go to the iTunes store on my phone and redownload them and it tells me that i have already purchased this ringtone and asks me if i want to buy it again. I press Cancel. I know when i do that with music it would usually let me redownload the song without buying it again but it wont let me with the ringtones...so how do i get them back? any help would be greatly appreicated

    Greetings,
    I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
    At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
    The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
    I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
    You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
    Good Luck - Cheers,
    M.

  • Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Does anyone use a LaCie external hard drive with their Mac using imovie '09?  I have some questions.

    Are you actually having a problem with the new Lacie drive, or are you just asking is the Lacie drive somehow different from your old G-Drive?
    From a connection standpoint, most Lacie desktop drives have both USB and FireWire connections, just like the G-Drives do.  You would connect and use it the same as a G-Drive.
    Regarding capturing to the external HD, if you are using a camcorder that has FireWire (iLink) connection, it is not advisable to have an external FireWire HD connected to your Mac at the same time as your camcorder; there are often communication conflicts between the camcorder and the hard drive if they are connected at the same time.  The conflicts usually appear as either dropped frames or a complete freeze.   This is more common with Canon miniDV camcorders but I have also seen this behavior with Sony miniDV camcorders.  (The problem is the camcorder's FW implementation, not the hard drive.)  The workaround is to capture to your Mac's internal HD and later copy the captured video to your external HD.

  • I'm going to install Arch this weekend but I have some questions

    Currently I use Linux Mint on my primary PC, but I've installed Arch on my older PC at my parents house.  I like it a lot and I think I want a distro that is rolling release and also that I build myself (as opposed to installing all of the bloat on Mint).  However, I do have some questions; Linux is pretty new to me (been using it since about November) so I don't know exactly how everything works.
    1)  How do I know what packages I have to have installed for building C/C++ programs?  I know in Ubuntu install gcc/g++ by itself doesn't get the job done, you need build-essential to get all of the libraries.  Also, what packages do I need for OpenGL and SDL?  I'm a CS major and I'm in an OpenGL class so I need to be able to compile OpenGL programs; SDL is for my own purposes, but I'd still like to have it.
    2)  I use Amarok to transfer songs to my iPod.  Amarok 1.48 and libgpod 0.6.0 are in the repos and I know both of those are compatible with my 6th gen.  However, I do have a question about transferring album art.  On Mint, Amarok transfers the album art as I transfer the album, but someone told me that Amarok doesn't do that by default; there must have been a setting changed somewhere to do that.  I looked through Amarok's options and didn't see anything like that... anyone know if I can do that in Arch, and how?  There's no real information about Amarok in the wiki.
    3)  I'm going to use Gnome environment but some KDE apps (like Amarok).  Will there be any problems with that that I should know about in advance?
    I'll probably have some more questions once I actually install Arch, but that will do for now   Those are the important ones.

    1) You know by seeing its dependencies on pacman or by the developer documentation. Unlike other distros, you don't need to install dev packages. Example: You have gcc and all the basic gnu tools installed, and you want to compile a program that is not in a arch linux package yet (if theres a package, you can build it using abs / makepkg and pacman will handle the dependencies) and requires, for example, a library called "xyz", you only need to download "xyz" from pacman, and all the dev stuff will come together (like header and etc).
    I hope it helps.

  • I have a question regarding emails being marked as unread when syncing with an exchange account.

    I have a question regarding emails being marked as unread when syncing with an exchange account.
    In the evening I can see I have 10 unread emails on my exchange account. I leave them unread. The following day, at work, I view and read all my mails from today and yesterday, so that I have NO unread messages. When I then sync my iphone it marks only the mails from today as read but, leaves all the mails from yesterday marked unread. Only solution so far is for me to go through the mails on my iphone one at a time for them to be marked as read.
    My mail account is set to sync 1 month back.
    I have had this problem on all the iphones I have had.
    I currently have an iPhone 5 and my software is up to date.
    What am I doing wrong?

    Hey kabsl,
    Thanks for the post.
    What type of email account is attached to your BlackBerry Z10? (POP3, IMAP, Exchange).  Also have you tried removing and re-adding the email account to test?
    Is this email account only setup on one computer or several computer?
    I look forward to your reply.
    Cheers.
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Some questions regarding x-fi pro 5.1

    Hi guys, i have some questions that i cant seem to find answers to that i hope someone can help me with.
    I recently bought an X-FI Pro 5.1 USB sound blaster.
    I have it plugged into my computer, and i have an optical cable from its spdif output connected to my wireless surround headphones (sony ds6500). These headphones can accept up to 7.1 signals in dolby digital and DTS and they "emulate" a surround through its 2 speaker elements.
    As a reference i can add that i have tried these plugged directly into my PS3 system and the 5.1 DD signal i get is really good! You can clearly hear what is behind and what is in front of you!
    I have installed the latest drivers and all available software from creatives website.
    1:
    And when reading about this card i often see people refering to the diffrent modes available (entertainment, game and cinema). But nowhere in any software can i find any option to change my mode, which seems to be stuck in entertainment. Whats up with this?
    2. I am getting a DD signal to the headphones, they indicate this so the system has the basics properly set up.
    But the biggest gripe i cant figure out is why it send the same audio from the FRONT and REAR.
    That is, i can hear no diffrence between the signal that is suppose to be the front speaker and the one that is suppose to be the rear speaker. What am i missing?
    3. I have about .5 sec delay of the audio when playing a game for instance, can this be solved?
    Please ask if you need any more info to help me solve this.
    Thanks in advance

    Okay, btw. you mixed point 1 with 2 i'll stay at original numbering
    1. [2.]) Well, i must confess the manual from creative isn't working correct (while the ones for other creative card work, just checked), it just shows the menue but the browsing page shows an error (if the one that is packed with your software is working and you could upload it that would help a lot). So i just searched for modes and found one so i thought it would have them. But now i took a deeper look and there is just the Entertainment Mode in Creative Software Suite. Also the Quick Start Guide shows there is not much software available, so i guess this card simply doesn't have it.
    2. [1.]) That should work either you can try 2/2.1 or Headphone (in X-FI Console and Windows Audio Console) as the Headphone is Stereo only with kind of virtual Surround like CMSS does. Btw. on your first post you wrote: kind of nice DD you hear. Thats wrong AFAIK. You hear Sonys Virtual Technology or maybe (as other Surround Headsets feature that) Dolby Headphone. Anyway it might be some of the creative options mix up with Sony way of surround sound. So did you try enable/deable CMSS (3D/Headphone/Virtual etc)? Else it just can be the configuration of speakers in Windows: Please note that the channel settings in Windows® Vista/7 can be set in Windows Audio Console, not in the X-Fi Audio Console. (Right click the speaker icon at the system tray, Select playback device, “Speakers”, Speaker Configures)
    3. Concerning the Delay: Under 'Creative audio control panel,' be certain that 'high speed' (2.0) is checked, and not 'full speed' (1.1) . Else you might need to switch back to Vista or XP drivers that obveausly helped some people to solve the delay problem. Or you try newest PAX drivers eg. wait on Danial_K's new X-Fi Pack (what i believe will be best bet as you also get new functions). I know creative drivers are a bunch of ****** and if you compare to AuzenTech oder ASUS f.e. the hardware isn't better too. Never going to buy creative again.

  • Just installed Arch again on my laptop, have some questions

    Hi there.
    After a few months of being linux-less, i decided to install it again (I corrupted my partition last time and have been too lazy to fix it =P). I'm also currently using KDEmod, which is great.
    However, I have some questions.
    1) It doesn't seem that the sound settings are being saved when I log out of KDE. It's always at 100%, and I always have to turn it down.
    2) I have this little cell-phone looking icon in the systray, and when i mouse over it it tell me:
    Network Management is changing!
    it is highly unstable and will crash your desktop. Until further notice, please use KDE 4 knetworkmanager instead
    Well, I looked an I've already got knetworkmanager installed:
    yaourt -Ss knetworkmanager
    kdemod-core/kdemod-networkmanagement-knetworkmanager-kde4 1030904-1 [installed] (kdemod kdemod-complete kdemod-networkmanagement kdemod-uninstall)
    KNetworkManager for KDE4
    kdemod-core/kdemod-networkmanagement-knetworkmanager-kde4-debug 1030904-1 (kdemod-debug kdemod-networkmanagement-debug kdemod-uninstall)
    KNetworkManager for KDE4 (Debugging Symbols)
    aur/knetworkmanager 0.2.2-4 (71)
    A NetworkManager front-end for kde3 and kde4, based in version 0.2.2 stable
    aur/knetworkmanager-unstable 737532-1 (Out of Date) (6)
    A NetworkManager front-end for KDE
    I remember when i had Arch before that I used ArchAssistant to manage my wired/wireless connections. Is that still around? Can anyone recommend anything else, cause I also remember getting ArchAssistant to work was a hell of a project.
    3) When I first logged in, the Akonadi Server Self-report popped up. I rememebr this from before, and could never get it to work (I really don't even know what Akonadi is, tbh). It says that the control and server process is not register to D-Bus. How can I fix this? Would I have to start and configure the MySQL daemon?
    Thanks for any help!

    For the first one, set the volume to your desired startup level, open a terminal window and run "sudo aslactl store"
    Then in your startup daemons add @alsa. That will restore your volume settings on boot, not sure about just logging in and out of KDE though. (I don't run KDE)
    see:
    http://wiki.archlinux.org/index.php/ALS … at_startup

  • IOS  Developer Enterprise Program:  Can I have a discussion with an Apple Representitive, I have some questions.

    My Company is interested in distributing apps through our existing web portal within our organization. Can I have a discussion with an Apple Representitive, I have some questions?

    https://developer.apple.com/contact/
    Regards.

  • Hi team , I have some questions/Problem for my product apple (iPad,iPhone) , I want to employee speak and type thai language

    Hi team , I have some questions/Problem for my product apple (iPad,) , I want to employee that can  speak  or response me in thai language
    1. ผม อาคเนย์  พำนักอยู่ประเทศไทย กรุงเทพฯ  มีปัญหาสอบถาม ดังต่อไปนี้
       - กระผมได้ทำการตัดบัตร เครดิต เพื่อซื้อเกมส์ผ่าน itune store ผ่าน apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ในวันที่18 ก.ค. 56 เวลา 17.07น. ซึ่งทางบัตรเครดิตได้แจ้งเรียกเก็บเงินมายอดเงิน 39.99$ ซึ่งในระบบจริงๆ ทางกระผมต้องการตัดในยอด 99.99$ แต่พอได้ประสานงานไปยังธนาคาร ได้รับการแจ้งกลับมาว่า ได้ทำการตัดบัตรในยอดเงิน 39.99$ ซึ่งในความเป็นจริงนั้น กระผมไม่ได้สั่งซื้อเกมส์ในยอด 39.99$ ซึ่งในยอด 99.99$ นั้นพยายามตัดในระบบบัตรเครดิตอยู่ แต่ทางกระผมได้ยืนยันกลับไปว่าไม่ให้ระบบตัดนะครับ เพราะว่าเนื่องจากมีปัญหาในการชำระเงินระหว่าง Apple itune store อยู่
       - ทั้งนี้ขอให้ทางเจ้าหน้าที่ประสานงานตรวจสอบ apple itune ID : misskor.yaprom@*** เพื่อซื้อเกมส์ Eleves Realm ตามที่ได้ให้รายละเอียดโดยด่วนว่าเป็นเพราะว่าระบบมีปัญหาหรือว่ามีอะไรเกิดขึ้นในข ั้นตอนการชำระเงินครับ
    รบกวนประสานงานกลับมายังกระผม อาคเนย์ ที่หมายเลขโทรศัพท์มือถือ +**** / reply feedback  email : lekod1@*** โดยด่วน ในวันศุกร์ที่ 19 ก.ค. 2556 ครับ
    ขอบคุณครับ
    อาคเนย์  อุดปิน
    กด
    <Edited By Host>

    Google translation:
    พนักงานของ iTunes Store จะไม่ได้อ่านข้อความในเว็บบอร์ดนี้ ถ้าคุณต้องการความช่วยเหลือสำหรับปัญหาที่มีใน iTunes Store, คุณจะต้องติดต่อกับพวกเขาผ่านทางแบบฟอร์มเว็บนี้:
    http://www.apple.com/emea/support/itunes/contact.html

Maybe you are looking for

  • Cannot connect to home wifi?

    why can't i connect to my home wifi, everyone else in the house can ?

  • Mac airplay to apple tv, there is only voice,no video..

    mac airplay to apple tv, there is only voice,no video..

  • How do I get rid of recording "skips"?

    Whenever I attemp to record a real instrument - mostly guitar - I invariably get at least one or two (sometimes many more) "skips." Usually these are loud digital spikes that cut out enough information to throw the part out of sync with the rest of t

  • DRM-protected PDF crashes Safari on iPad

    DRM-protected PDF crashes Safari on iPad (iOS 5.1/9B176). After restart the document is blank. When choose Acrobat from "Open it..." list it says "The document is empty". Is there a workaround? It looks like Safari PDF preview software failes to hand

  • Unable to set correct resolution  in games

    Hey, Tried to start up Jedi Academy to give my 256 graphics card a spin on the new 20" iMac. It's pretty cool, but I can never get the resolution set right. It can only go to 1024x768 instead of 1600xwhatever which is what I want. I know the iMac dis