I have succesfully replaced firefox 4.0.1 with 3.6.2 as I have a Mac Mini but not the intel chip. Everything works fine except I can't get rid of the install window and the firefox logo in a simulated drive on my desk top home screen.

When viewing videos, they would seem to running in slow motion. I thought that by reverting back to an older version that was compatible with my system that I might correct the problem.

Does the iPod work OK?
Does it charge when connect to the computer?
Does it appear in My Computer?
Look at the dock connector on the iPod. Compare with the iPod that does work/connect.
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1
http://support.apple.com/kb/HT1353#iPod_touch_late2009
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.

Similar Messages

  • After opening my yahoo mail window, I keep getting a very narrow dialogue box with the words "log into Xmarks" I cannot ... and everything is frozen. How can I get rid of this thing, and what is it? I have to hit CNTRL + ALT + ESC to get rid of it.

    After opening my yahoo mail window, I keep getting a very short and narrow dialogue box with the words "log into Xmarks" I cannot ... when it pops up, always upper left of my laptop screen and I try to get into my yahoo mail web page, I get a DING sound and cannot enter it ... everything is frozen. I have to hit CNTRL + ALT + ESC to get rid of it - and then reload my Firefox browser to get back to my yahoo e-mail page ... fortunately for me, Firefox re-stores a previous session ... How can I get rid of this intrusive thing, and what is it? Thanks in advance ... Ted Beaudoin, Welland, ON, Canada

    Remove VideoFileDownload and find a downloader that doesn't contain TextEnhance.

  • Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.

    Hello.  I recently pieced together a late 2008 MacBook Pro 15".  Everything works fine except the battery constantly goes between "not charging" and "calculating" or, rarely "charging". It does charge after a long while and will report that it is charged.
    I have reset the NVRAM and the SMC a couple of time but that didn't work so I ran an Apple Hardware Test and while testing the logic board it gives the following error:
    4SNS/1/40000000 LB1T
    I've done some research and found this is a temperature sensor related to the battery, but cannot find where the sensor is located in the computer.  Would you know how I can find the sensor to test it?  Could my battery problem be related to something else?  Would a fresh install of Lion help?
    Thank you!
    Mike
    Two pieces of information that may or may not b helpful, the hard drive is from my early 2008 MBP and the only test disc I have access to is from an iMac.

    Why do you have LION installed on that older machine?
    So you say you built a macbook from a bucket of parts eh?   Kudos
    heres a pic of the battery temp sensor

  • I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    I just put Facetime on my MacBook and Ipad. I can connect and recieve video but no sound. The other person can hear me. If I use Skype everything works fine. I can't find any where in Facetime to change settings for the audio. Any suggestions

    Options for when an iOS device gets locked because of forgotten passcode:
    Restore (and reset passcode) on your device by connecting it to the last computer to which it was connected:
    iTunes: Backing up, updating, and restoring iOS software - http://support.apple.com/kb/HT1414
    If you cannot connect it to the computer to which the device was last connected (or the device was never connected to a computer) you will have to use recovery mode to completely reset the device, losing all data:
    iOS: Unable to update or restore - http://support.apple.com/kb/HT1808 - recovery mode (e.g., cannot connect to computer last used to sync device, iTunes still asks for a password)
    If recovery does not work there's:
    DFU mode: http://osxdaily.com/2010/12/04/ipad-dfu-mode/
    How to put iPod touch / iPhone into DFU mode - http://geekindisguise.wordpress.com/2009/07/16/how-to-put-ipod-touch-iphone-into -dfu-mode/

  • TS4003 Since the MobileMe move I keep getting a screen that says "IDisk Conflict Resolver." I've done everything asked to "resolve" the problem but it keeps popping up every few minutes. How can I get rid of this?

    Since the MobileMe move I keep getting a pop-up screen that says "IDisk Conflict Resolver." I've done everything asked to "resolve" the problem but it keeps popping up every few minutes. How can I get rid of this?

    Ok....so I have found a work around....if not a complete solution.
    I'm not sure if deleting your music, uninstalling ITunes and reinstalling and adding your music back will actually affect it but I tried it again. Started from scratch.
    I checked the box for "Manually manage music and videos"
    Then I moved my music to phone via drag and drop, usually just boxing a row of albums at a time.
    I went back into my Iphone and began the sync. The message popped up, "1 Item could not be synced" and the sync stopped. At that point, I just clicked sync again and it started back up again. It took a few go's but eventually I got all my music on my phone.
    Ironically enough, the only songs that wouldn't sync were songs that I had actually purchased from Itunes....kinda odd

  • After i update my ipad 2(wifi 3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    after i update my ipad 2(wifi+3g/64g) to ios 5.0.1..everything works ok except 3g  can not connect to internet.. in the top of my ipad screen it show 3g sign..before update the 3g was working ok

    i am at SAUDI ARABIA and the Service Provider is (STC) i found that the APN setting has to change from (jawalnet.com.sa ) to (afaqwireless.com).. NOW 3G OK

  • HT4528 I dropped my phone in water, everything works fine except for the home button, it will not work. Any suggestions on how to fix this? I really don't have the money to buy a new phone right now...

    I dropped my phone into water for a split second and everything works fine except for the home button... I really don't have the money for a new iphone right now.. Please tell me some tricks to get it working again... Thank you

    put the phone in an open bowl of rice on a heated surfade such as a raduator
    for 48hours

  • I have a mac computer its not the new version but its definetly no the old , so anwa it sa that I cant download anything because it doesn't support its arcutecture , what does it mean by that? please answer. Thank you, bye

    I have a mac computer its not the new version but its definetly no the old , so anwa it sa that I cant download anything because it doesn't support its arcutecture , what does it mean by that? please answer. Thank you, bye

    Which version of operating system are you running? Please go to Apple in menu bar, click on 'about this Mac" and click on the numbers under the big Mac OS X until you see "version 10.x.x" - copy what it says and post it here please.

  • My drive crashed. Re-installed CS5. Works fine except that can no longer go from Bridge by clicking

    My drive crashed. Re-installed CS5. Works fine except that can no longer go from Bridge by clicking on small photo there. I found the place to change but CS5 is not an option. Tried to change prefernce in Windows 8 but not there either.

    Thanks.  Before my re-installation if I was in Bridge and found a photo I wanted to edit in CS5 I would just double click it and it would be brought in.  Now when I do this I am brought into a microsoft viewer. To edit a picture I found in Bridge I have to write down its name and directory, open up CS5 (if it is not) and navigate to the photo.  I found the place in Photshop and Bridge where you are supposed to be able to change the default program invoked when you double click on a photo in Bridge but there is no choice given other than the Microsoft viewer.  Any help you can give would be greatly appreciated.  At some point some web site I was reading suggested the problem being related to CS5 failing to make some change in the registry when it installed? This, or its solution is beyond my ken... Thanks, RobStl

  • I changed my apple id and everything works fine except message and face time. I cannot reactivate imessage and facetime shows my email to send and receive instead of my mobile number.

    I changed my apple id and everything works fine except message and facetime. I cannot reactivate imessage and facetime is using my email instead of my mobile number. How do I reactivated message and use my mobile number on both applications?

    I apologize. I misread your statement.
    The information that I provided about adding the phone number back to the iPad is valid and should work. Now as for the activation of messages, take a look at these support articles for starters. Hopefully, something in one of these will help.
    iOS: Troubleshooting FaceTime and iMessage activation
    iOS: Troubleshooting Messages - Support - Apple

  • HT5622 i lost my iPad i have my apple ID but not iCloude ID, is there any way that i can find my iPad

    i lost my iPad i have my apple ID but not iCloude ID, is there any way that i can find my iPad

    Read here > http://support.apple.com/kb/HT5668

  • I can't get rid of somoto toolbar search and default homepage. Somoto doesnt appear in the list of searching and also not as installed software in my computer.

    I can't get rid of Somoto, it doesnt appear in my search engine list and also not in my list of installed add ons or software, but its there, it is also my default homepage if i open a new tab. any idea?
    thanks

    Please do the following.<br><br>
    #In the location bar where you normally type in a web address, type '''about:config''' and hit Enter.<br><br>
    #If you see a window which says "This might void your warranty!", click the button which says "I'll be careful, I promise" so you can continue with the next step.<br><br>
    #In the filter at the top, type: '''keyword.URL'''<br><br>
    #Double click it and remove whatever's in there and replace it with http://www.google.com/search?q= and then click OK.<br><br>
    #Close the tab
    The URL to add in "keyword.URL" becomes a link in this post, so right click it and choose "Copy Link Location" to copy it to the Windows clipboard. Then hit CTRL+V to paste it. Saves you having to type the whole thing.
    '''To reset your home page, do the following'''.<br><br>
    * Go to the site you want to set as your homepage.<br><br>
    * Click the Firefox button, go to '''Options '''| '''Options '''| '''General'''.<br><br>
    * Make sure it says "''Show My Homepage''" in the first dropdown menu.<br><br>
    * Click the button called "'''Use Current Pages'''" to set the homepage to the one you have on the screen.<br>
    If this suggestion resolves the problem for you, please click the '''Solved it''' button ''next to this post'' after you log in into the forum. This will help others searching for a solution to the same problem.
    Thanks.

  • Have a mac mini. Just got a external HD. I want to store my itunes media on my external HD and play back on Windows XP laptop. My laptop does not recognize the HD. Only recognizes the empty partition I created on my mac when I partition the drive. What's

    I have a mac mini-snow leopard. I recently bought an external HD. I want to use part of the HD to back up my mac via Time Machine. The other part I want to use to store my Itunes and other media such as movies with VLC so that I can take the HD and play it back thru my windows XP laptop. The problem is that my laptop does not see the part of the external drive that has my mac info stored on it. Only sees the drive ( as drive E ) with zero data that was created by me when I partitioned it on my mac. I partitioned the drive in two. One partitioned under GUID for mac. The other part under exfat for windows. Any suggestions on why my XP laptop cannot view the mac info on the HD. Thanks.

    DBG413 wrote:
    Any suggestions on why my XP laptop cannot view the mac info on the HD. 
    you'll have to install e.g. MacDrive or HFS+ for Windows on your winsloth machine.

  • Greetings: I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked.  I upgraded to Snow Leopard and everything works fine - except Bluetooth. The Bluetooth icon isn't there. Any ideas?

    Greetings:
    I have just acquired an older mini mac (2006 1.66 ghz core 2 duo) Anyway, it had Tiger 10.4 on it and the Bluetooth worked for the wireless Apple keyboard and mouse.  I upgraded to Snow Leopard and everything works fine - everything except Bluetooth.
    The Bluetooth icon does not exist in the System Preferenc screen.
    I tried to download Bluetooth from Apple site but the message I got told me that I didn't need it. 
    Under Finder, Utilities, I found Bluetooth File Exchange but the message I got was that I had to connect a Bluetooth device to my computer.
    I have to admit that I have no idea what's going on here.  I am hoping to avert the need to try another complete re-install of Snow Leopard.
    Any ideas?
    Thanks
    javaminit

    Puzzled is a polite word for it.
    Thanks Barry - I found the file and trie to send it to trash.  The response: (This item cannot be trashed as it it owned by the system).
    After dancing around with PRAM and SMC and turning on while holding the power-cntrl-option-shift and heavens knows what else, I now have the Bluetooth symbol on the top of the menu bar but it is ghoseted and has a squiggly line through it.   This, I didn't have before so I read this as some progress.  It notes that "Bluetooth is not available">
    However, the Bluetooth icon is still missing from the System Preferences window - you know, between "network" and "sharing".
    You note that you reckon the issue is not software based and you may be correct.  The reason that I wonder about that though, is that before I installed Snow Leopard, the keyboard and mouse both paired with the box under the Tiger 10.4.  That leads me to conclude that hardware is functional and that there is some screwy little bit of software that is not cooperating.
    If I could delete Bluetooth from the system and re-install a fresh version, that might help.  Or, is there a way I can use the Snow Leopard install disc and only load in Bluetooth?
    I'm stumped.
    Thanks for your time
    /Bill C.

  • HT4623 How can I get rid of this new update and go back to the previous one and how can I register a complaint with Apple?

    How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?

    You can't go back.
    You can leave feedback: http://www.apple.com/feedback

Maybe you are looking for

  • Process.start("winword", filename) can not open file with space in the path and name

    Hi, I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles. the problem: if the path or file name has space in it, even it exist, winword still can not open it. could someone kin

  • Sharing calenders with none mobile me people ?

    i am trying to set up a calender for my client who is not a mobile me account holder how do i publish it so they can see it ?? its telling me only mobile me accounts can subscribe to it ?? very confused thanks in advance.

  • How to automatically create a script based on XML input

    I was wondering if it is possible to automatically generate a script in Flash itself, so like a plug in or something that I can build that will allow me to take in an xml document and generate scripts on certain frames in certain movie clips or is it

  • Illustrator is slow when i work with micro text

    I have Adobe Creative Suite 4 Design Premium, and all programs works perfectly, except Illustrator, i can manage all but when some work have microtext it takes a lot of minutes thinking and processing the order, inclusive "select" takes about 2 minut

  • Ora-6512 error in string appending , plz guide to soleve this.

    declare x varchar2(4000); y varchar2(10000); cursor c is select ename||'----'||to_char(empno) from emp; /*( to_char or no to_char it did not matter)*/ begin open c; loop fetch c into y ; exit when(sql%notfound); --if c%rowcount = 1 then -- x:=y; -- e