I have the lengthy code for a PayPal button. I tried to past it in an iWeb welcom page and all I get is the code. No button. Can you help me?

I have the lengthy code for a PayPal button. I tried to past it in an iWeb welcome page and all I get is the code. No button. Can you help me?

Similar Messages

I'm trying to run a .jsp page and all I get is the following error. Thoughts?

Running Coldfusion 8 / JRun 4 updater 7 / Coldfusion 8 hotfix
2.
I'm trying to run a .jsp page and all I get is the following
error. Thoughts?
Could not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
jrunx.compiler.JavaCompiler$NoCompilerFoundException: Could
not invoke Java compiler, please make sure jikesw is in
I:\JRun4/bin or put a JDK bin directory in your path.
at
jrunx.compiler.JavaCompiler.outProcessCompile(JavaCompiler.java:474)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:132)
at
jrunx.compiler.JavaCompiler.compile(JavaCompiler.java:100)
at jrun.jsp.Translator.compilePage(Translator.java:176)
at jrun.jsp.Translator.translate(Translator.java:254)
at jrun.jsp.Translator.translate(Translator.java:101)
at jrun.jsp.JSPEngine.translateJSP(JSPEngine.java:707)
at jrun.jsp.JSPServlet.translate(JSPServlet.java:125)
at jrun.jsp.JSPServlet.service(JSPServlet.java:113)
at
jrun.servlet.ServletInvoker.invoke(ServletInvoker.java:106)
at
jrun.servlet.JRunInvokerChain.invokeNext(JRunInvokerChain.java:42)
at
jrun.servlet.JRunRequestDispatcher.invoke(JRunRequestDispatcher.java:286)
at
jrun.servlet.ServletEngineService.dispatch(ServletEngineService.java:543)
at
jrun.servlet.jrpp.JRunProxyService.invokeRunnable(JRunProxyService.java:203)
at
jrunx.scheduler.ThreadPool$ThreadThrottle.invokeRunnable(ThreadPool.java:428)
at jrunx.scheduler.WorkerThread.run(WorkerThread.java:66)

You're right, that ws another fix I tried. There is no fix fo
rthe issue described, but it still seems like an old issue. My
class paths are short. Here is my jvm.config (pretty standard):
# VM configuration
# Where to find JVM, if {java.home}/jre exists then that JVM
is used
# if not then it must be the path to the JRE itself
java.home=I:/JRun4/jre
# If no java.home is specified a VM is located by looking in
these places in this
# order:
# 1) bin directory for java.dll (windows) or
lib/<ARCH>/libjava.so (unix)
# 2) ../jre
# 3) registry (windows only)
# 4) JAVA_HOME env var plus jre (ie $JAVA_HOME/jre)
# Arguments to VM
java.args=-server -Xmx1000m -Dsun.io.useCanonCaches=false
-XX:MaxPermSize=256m -XX:+UseParallelGC
-Dcoldfusion.rootDir={application.home}/
# commas will be converted to platform specific separator and
the result will be passed
# as -Djava.ext.dirs= to the VM
java.ext.dirs={jre.home}/lib/ext
# where to find shared libraries
java.library.path={application.home}/lib,{application.home}/servers/cfusion/cfusion-ear/cf usion-war/WEB-INF/cfusion/lib,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/W EB-INF/cfusion/jintegra/bin,{application.home}/servers/cfusion/cfusion-ear/cfusion-war/WEB -INF/cfusion/jintegra/bin/international
system.path.first=false
# set the current working directory - useful for Windows to
control
# the default search path used when loading DLLs since it
comes
# before system directory, windows directory and PATH
java.user.dir={application.home}/../lib
# JVM classpath
java.class.path={application.home}/servers/lib,{application.home}/lib

Hello, I have a "clé usb" with a imovie film in. I want to read it with my mac and with iMovie but it didn't work! Can you help me please

hello, I have a "clé usb" with a imovie film in. I want to read it with my mac and with iMovie but it didn't work! Can you help me please

Jeanne, you are going to have to give us some additional information: what kind of files are they, on what computer, using what application, were they made, how was the USB key formatted in the first place?
Do the files not copy to your desktop?

I am trying to stream video from iTunes store for the last 2 days and all I get is the message "iTunes store is unavailable. Try again later." I have tried turning it off, restoring it, signing in and out again. Netflix works though.

I am trying to stream video from iTunes store for the last 2 days and all I get is the message "iTunes store is unavailable. Try again later." I have tried turning it off, unplugging all cords, restarting it, reseting it, restoring it, and signing in and out again. Netflix works, but iTunes seems to be bugging out. If anyone could help, it would be much appreciated. Thanks.

melaniefrommadisonville wrote:
I want to try to un-install iTunes then re-intstall but am a new mac user and don't know how to do this.
click here and follow the instructions.

I switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

i switch on my mac book pro and all i get is the apple logo and below a loading wheel , but its stuck there for like an hour !!! help??

Take each of these steps that you haven't already tried. Stop when the problem is resolved.
Step 1
The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
a. Boot into the Recovery partition, or from a local Time Machine backup volume (option key at startup.) When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.”
b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
Step 2
If the startup process stops at a blank gray screen with no Apple logo or spinning "daisy wheel," then the startup volume may be full. If you had previously seen warnings of low disk space, this is almost certainly the case. The easiest way to deal with the problem is to boot from an external drive, or else to use either of the techniques in Steps 1b and 1c to mount the internal drive and delete some files. According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation.
Step 3
Sometimes a boot failure can be resolved by resetting the NVRAM.
Step 4
If you use a wireless keyboard, trackpad, or mouse, replace or recharge the batteries. The battery level shown in the Bluetooth menu item may not be accurate.
Step 5
If there's a built-in optical drive, a disc may be stuck in it. Follow these instructions to eject it.
Step 6
Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
Step 7
If you've booted from an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
Boot in safe mode. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Post for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is corrupt and the drive is probably malfunctioning. In that case, go to Step 6.
If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
Step 8
Launch Disk Utility in Recovery mode (see Step 1.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it may produce. Look for the line "Permissions repair complete" at the end of the output. Then reboot as usual.
Step 9
Reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
Step 10
Repeat Step 9, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a Time Machine or other backup.
Step 11
This step applies only to models that have a logic-board ("PRAM") battery: all Mac Pro's and some others (not current models.) Both desktop and portable Macs used to have such a battery. The logic-board battery, if there is one, is separate from the main battery of a portable. A dead logic-board battery can cause a boot failure. Typically the failure will be preceded by loss of the settings for the startup disk and system clock. See the user manual for replacement instructions. You may have to take the machine to a service provider to have the battery replaced.
Step 12
If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store, or go to another authorized service provider.

I have a mac pro, and today i turned it on and all i get is the white power light come s on and starts flashing, my computer does not boot up can anybody help?

why doesn t my mac pro boot up, i turned it on today and all i get is the white power light on the front of the computer starts flashing, does any body know about this problem?

Which model of Mac Pro do you own?
Check Crucial.com for their opinion, but there are cheaper ways to go.

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

I don't understand why I can't download for free the apps designed by Apple, such as Pages and Numbers, which are free with iOS 7. Can anyone help me?

The apps are free with iOS 7 if you purchased a new device after September 2013. The apps do not come free just because you are running iOS 7 now. Did you purchase or receive a new iPad recently?
If you did, are you using the same Apple ID to get the apps that you used to activate the iPad? If you are, sign out of your ID, restart your iPad, sign in again and go back to the App Syore and see if the apps show up as free.
Settings>iTunes & App Store>tap your ID and sign out. Restart the iPad and go back to the settings and sign in again.

My Mac book will power up but the apple sign remains in the middle of the screen and a gear turning below it -nothing else happens -can you help?

my Mac book will power up but the apple sign remains in the middle of the screen and a gear turning below it -nothing else happens -can you help?

A couple of things to try:
PRAM reset by holding down cmd-opt-p-r on restart. Hold down the keys until you hear the second startup tone.
If you have a wireless keyboard, wait until you hear the startup tone, then press the keys.
http://support.apple.com/kb/HT1379
Boot into Safe Mode by holding down Shift key on restart. Same timing applies to wireless keyboard.
Safe Mode takes a while to boot. It will show a progress bar. It will boot to the login screen. Log in, then restart normally.
http://support.apple.com/kb/ht1455
Boot into Recovery HD by holding down cmd-r. Same note for wireless keyboard. Once booted, run Disk Utility and repair Macintosh HD (or whatever you have renamed it).
http://support.apple.com/kb/ht4718

HT201356 hi , i forget my question and answer for my apple id , and i try to restore it but i cannot , can you help me with that thanks

hi , i forget my question and answer for my apple id , and i try to restore it but i cannot , can you help me with that thanks

You will have to try to recover the password or contact Apple for help.
https://iforgot.apple.com/
IF you still cannot recover it, contact Apple according to the instructions here.
Apple ID: Contacting Apple for help with Apple ID account security - Apple Support

I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this?

I got a 8gig ipod touch from a freind and all I get on the screen is a usb plug with an arrow pointing towards the itunes logo. How do I resolve this? I don't know what operating system it runs, or what year it was manufactured, it is a chrome one.

http://support.apple.com/kb/TS1369
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Hi Guys, Im trying to send a 80pages IPhoto book to the store but the uploading fails, I tried several times and always a message "an error occurred" without clarification, can you help me?

Hi Guys, Im trying to send a 80pages IPhoto book to the store but the uploading fails, I tried several times and always a message "an error occurred" without clarification, can you help me?
Is there any size limit? or a limit of time to upload? (as it takes more than one hour!!!)

Preview the book -
Before ordering your book preview it using this method - http://support.apple.com/kb/HT1040 - and save the resulting PDF for reference - the delivered book will match it.
if it is good boot into safe mode, preview again (only limited fonts are loaded in safe mode) and upload
LN

HT5361 I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

I am unable to start or select the MAIL app. No incoming mail and no outgoing mail. I do not even know how to get an answer without email. Can you help?

Thank you Carolyn, How helpless you can feel without this App!
Going into the App Store as you suggest, I see 'thee updates available", the first says, 'X RESTART', the second says, 'Garage Band, an error has occurred" (in red), and the third 'Memory Clean, UPDATE'.
Am I correct in thinking that OSX is the problem, because it is waiting for a restart?
Kind regards,
Cy

I have an iphone 3gs. i do not get push notifications from any application. can you help me?

I have an iphone 3gs. i do not get push notifications from any application. can you help me?

Do you have Notifications turned On and setup for each desired app?
Settings > Notifications

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

I am having problems with my macbook pro and the dock. About every fourth time I start the computer, the dock flashes on and off, then goes completely off and all I get is the spinning ball with brief moments of the cursor. But the computer locks up.

Do you have Parallels installed by any chance? There is a known problem that causes symptoms similar to this. You do not need to actually be running Parallels at the time and nothing in ActivityMonitor would point to Parallels. An update corrects the problem:
http://kb.parallels.com/111541

I was able to use wi-fi sync between the ipad1 and my pc(windows 7), but not now. Can you help me?

I was able to use wi-fi sync between the ipad1 and my pc(windows 7), but not now. Can you help me?

Remove the iPhone from the list of devices in the car. Remove the car from the list of devices in the iPhone. Turn Bluetooth off on the phone and reset the phone. hodl the sleep/wake and home buttons together until you see the Apple logo and release. The phone will reboot. Turn the car on and put the radio into discovery/pairing mode. Turn Bluetooth on for the iPhone which puts it into discovery/pairing mode. The two should see each other.

I have the lengthy code for a PayPal button. I tried to past it in an iWeb welcom page and all I get is the code. No button. Can you help me?

Similar Messages

Maybe you are looking for