I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.
I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?
I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
I would suggest trying a different firewire cable.
You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
Here is a link.
http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
Other things to check:
Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.
Similar Messages
-
Does the new Macbook Pro 15" (late 2013) supports 4K via Thunderbolt/Displayport?
I understand that the new Macbook Pro 15" (late 2013 with Nvidia) supports 4K screen resolutions via HDMI at low hertz. But does it support 4K via Thunderbolt/Displayport? I read on Intel's web that the NVIDIA GeForce GT 750M with 2GB memory in theory can support it. Would be important as a range of new 4K 32" monitors will come out over the next year. Would be great for photo, video editing etc.
I also am very confused by this because per apple's support page it only supports 4K via HDMI at 30Hz but SHOULD support 60Hz via a mini display port 1.2 specification built into thunderbolt 2.
However, I think it does include 60Hz support (although not mentioned on apple's website). My evidence of this is that on the ifixit teardown they found a an Intel DSL 5520 Thunderbolt 2 controller which according to Intel's and Wikipedia's website is falcon ridge which means it should support Display port 1.2 natively. Plus, on apple's thunderbolt page they specifically mention connecting a 4K display to a macbook pro through the thunderbolt port (not which is suggested by the support page listed above):
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Also, the Apple mini displayport support page has not been updated since 2012 but I believe it is just showing old information
The BIG piece of evidence against the new macbook pro's supporting 4K through the thunderbolt port is that on apple's tech specs page they specifically mention 4K under the HDMI section but make no mention of it under the thunderbolt 2 section. -
Wi-fi problems in me new macbook pro 13 late 2011
hallo aim having problems with the wi-fi in me new macbook pro 13 late 2011, it seams to always be log on and off and i can't get a stabled connections other divides in the house work fine with the wifi(pc etc..)
If the MBP was purchased within the last year take it to the Apple store
or contact Apple. There are few threads in this site dealing with the same issue.
There is no single sure shot step to correct this problem.
May be you can go through those discussions and find a solution.
Best. -
I have upgraded my MacBook Pro 15 late 2011 to 8Gb RAM, now when I go to about this mac in it more info it doesn't show AMD graphics card as it used to before, it just show Intel HD Graphics 3000 512 MB is that a problem that I need to worry about?
and in system report >> hardware >> Graphics/Display >> it shows both grafics card listed.Some Mac's when the RAM is increased the Intel HD 3000 integrated graphics will bump itself up to the higher video RAM it takes, this seems to be what occured.
It also means the dedicated graphics card will be used less, but only so slightly less.
You obviously still should have both, you can test this by turning off Graphics Switching in Energy Saver, that will use the decicated AMD card all the time.
You can also run Cinebench and compare the scores here
Mac video card performance -
I have a new MacBook Pro with Iphoto installed when purchased. When editing a photo, primarily orientation changes, the slideshow initially displays the photos in proper orientation. However, after leaving Iphoto and shutting down the computer, and then going back to run a slideshow the photo displays back to its' original orientation, that is, the edit-change was not saved. Please help...the program information says all edit-changes are automatically save and therefore there is no save command, but my changes are not being saved...thank you for any suggestions...HM
what version of iPhoto and of the OS?
Back up your iPhoto library, Depress and hold the option (alt) and command keys and launch iPhoto - rebuild your iPhoto library database
LN -
MacBook Pro 17" (Late 2011) Graphics Card
Hello Community,
I've researched this community, and found some relevant posts to the following question. However, the answers I found weren't completely satisfying. So, I'm posting my own on the subject to help me and others.
I have the following:
• MacBook Pro 17" (Late 2011, MacBookPro8,3) 2.5 ghz Quad Core i7/512 SSD/8 GB RAM
• Graphics Card: AMD Radeon HD 6770M with 1 GB VRAM and Intel HD 3000 Graphics
I know desktop models can be upgraded, but I can not afford the one I need at the moment. I am aware that many Apple laptop graphics cards can not be upgraded. Can this particular AMD Radeon graphics card be replaced and upgraded?
If it can be replaced and upgraded, any suggestions on the best graphics card available? AMD has some nice upgrades.
The card is nice, fast, and I'm not unhappy with it, but I run graphics and multimedia applications, and could benefit from the newer cards available.
I appreciate your input community.
Thanks,
GregAbout the only time you can upgrade a video card in a notebook is if that model notebook came with a better video card then what you ordered. At a later date if that better video card become available on the used market you could by one and replace the original as it was made to fit in the same model.
But it is almost impossible to buy one from the original manufacturer. Especial during the current production run of that model.
In your case the model you bought has the best video card available in the new line of MBPs. So there is no better card that would fit in your system. Whether the new models that will be coming out later this year will use a better video card and whether it would physical fit in your model is unknow.
But all of what I wrote above doesn't really matter as with all Macbook Pros the video card and CPU is Soldered to the logic board and can not be replaced. If either fails the complete logic board needs to be replaced.
The only things that can be easily replaced by the user in a Apple Macbook Pro is the RAM, hard drive and DVD drive.
All other parts Apple does not sell to the general public.
So your only option is if the newer models have a better video card is to sell your present system and buy the new model. -
Macbook Pro 13" (Late 2011) - High Definition Audio Device - Code 10
Hi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
Thanks,
ThorstenHi, i installed Windows 7 Ultimate 64 Bit via Boot Camp on my new Macbook Pro 13" (Late 2011). Driver Disk was installed, but the "High Definition Audio Device" couldn't be started. Status is Code 10. Normal Cirrus Logic Audio is working. Any advice, how this could be fixed? Would be nice, to have audio over the Mini-Displayport HDMI Adapter on Windows as well (Works perfectly with Lion).
Thanks,
Thorsten -
I have a new MacBook Pro. I keep getting the message "Mail would like to use your keychain "login". How can I make this stop? I have run the keychain repair utility.
Hi,
With the Finder as the Front app go to the Go Menu > GO to Folder.
Copy and Paste the bold text below into the text field
~/Library/Keychains
Highlight the Keychain.
Use the CMD + i Keys together (Keystrokes for Get Info from the File Menu)
In the Info Panel that appears check the Ownership and Permission bit at the bottom.
Example Pic
Unlock Padlock
Check your Shortmname Appears (the (Me) one).
Open the Cogwheel icon
If it is Greyed Out to "Make "Shortname (Me)" owner then you are the Owner.
Check you have Read and Write Permissions.
You may need to check the Ownership and Permission on the ~/Library itself (you can do the same Get Info on Folders as well as Files)
If you don't Own it then, when you have changed that also Apply to Contents.
10:12 PM Tuesday; August 23, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb( 10.6.8)
Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images." No, Seriously -
I have a new Macbook pro and need to run some Windows software, it appears "Parallel" should work well from what I've have read. Will I have any issues or problems accessing and printing from various printers on my Windows 7 network within Parallel? Is Parallel in fact the best way to go?
First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long. -
I have a new macbook pro 2,6Ghz i7, 8GB 1600 Mhz internal ram, but he will not boot from an external disk with operating system Snow Leopard.
These Macs shipped with 10.7, and will run nothing older than that:
MacBook Pro
Date introduced
Original Mac OS X included
(see Tips 1 and 3)
Later Mac OS X included
(see Tip 1)
Mac OS X Build(s)
(see Tip 2)
MacBook Pro (Retina, Mid 2012)
Jun 2012
10.7.4
11E2068
MacBook Pro (15-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Mid 2012)
Jun 2012
10.7.4
11E2617
MacBook Pro (13-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (15-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001
MacBook Pro (17-inch, Late 2011)
Oct 2011
10.7.2
10.7.3
11C74, 11C2002, 11D2001 -
I have a new Macbook Pro. Trying to migrate files etc from my Macbook Air using a Thunderbolt Cable between them.
I follow the directions but the two computers never "discover" each other - using a WiFi connection works but 70 hours is a rough deal.
(Mac OS 10.8.2 on both computers)Are you trying target disk mode?
http://support.apple.com/kb/PH10725
Ciao -
I have a new Macbook Pro hooked up to a new Belkin wireless router. I can connect to the internet without a problem. I have an HP officejet printer hooked up the the router to work wirelessley, The router is reading it as connected. My computer reads it as offline. If I reset my computer it will print whatever the first thing is in the que but nothing else and does not work after that. Is there some sort of setting that I am missing? I am trying to set this printer up to work wirelessly from three mac laptops in my house but I can't even get it to work on one right now. Any help would be awesome
Mac OS X 10.7 Help: Troubleshoot a network printer
-
hello everyone! i have a new macbook pro and i want to download aperture. my app store says it is already installed (on my old macbook pro). how do i install aperture from the app store in this instance please?
Are yoy sure that Apeture is not in the Applications folder of the new system? If it is move it to the trash and the App Store will let you download Aperture from it.
You will need to make sure you use the same Apple ID you used to purchase it in the past.
regards -
i have macbook pro 13 late 2011. efi 2.7 not see on software update and if download from site say in not compatible. why?
Because your MBP does not require it.
-
I have a macbook pro md318 late 2011 i want to know can i change hard drive from 500GB to 2TB????
i have a macbook pro md318 late 2011 i want to know can i change hard drive from 500GB to 2TB????
Tbh, I really wouldn't bother.
I may get shot down here, but I like having storage centralised, backed up etc, so I would use the internal storage for the day to day stuff, and anything more dated, and large, then dump it on an external, with backup.
I've heard some horror stories about larger capacity drives getting over hot, and failing in some machines. Not macs particularly though.
Maybe you are looking for
-
Support for rfc1514 on Solaris 9
All, Does anyone have experience configuring the snmp management agent on a Solaris 9 system? I need to use the rfc1514 standard (host-resource mib) to support a large server environment for monitoring a variety of health stats that we are currently
-
Script for gather and store the log running queries details in a table?
Hi All, Please suggest the best query that gather and store the long running queries details in a table. Thanks, rup
-
Hi. I have two sets of images with the same size and names (but with different content), located in two different folders. I want to overlay and flatten all pairs with corresponding names (that is, image1.png from set 1 with image1.png from set 2, an
-
AS3 Image Map Linking Issue - No compiler errors
Hello, I've made an image map in Flash using AS3, however it does not seem to be working properly. The links only work in a strange succession. In order to click all the links you must first click the last link followed by the first link, then the se
-
I have a VI that was generated in Labview 5 under WFWG 3.11. I cannot open it in windows 98; some of the sub VI's open but the main program gives the following error: Failure: "objheap.cpp", line 480. Any clues. I'm currently using version 6.1. Thank