I have the original iphone and now have upgraded to iPhone 4s how do I get my notes section to copy to the 4s as well as my medical ICE app info? Any help would be greatly Apperciated!
I have the original iphone and now have upgraded to iPhone 4s how do I transfer all of my notes section and my ICE medical emergency info over to the iPhone 4s? Any help would be greatly Apperciated ....Thanks
http://support.apple.com/kb/ht2109
Similar Messages
-
I have an IMac. I put a folder on the desk top and now want to delete it. The folder seems to be locked. I went into Get Info and attemted to unlock the folder and delete it. Won't go away. There is nothing in the folder. How do I unlock this folder and delete it? When I try to delete it, I'm asked for my password which I put in and is accepted, but will not delete the folder. Any help would be great.
If you are sure there is nothing in it, download trashit, a useful free app. That will dispose of it.
Download Trash It! for Mac - Force-empty your trash can. MacUpdate.com -
Hi All,
I did the last update, there was a 'catastrophic failure' i had to restore my iPhone and now have lost all my apps, how do i get them back? Any ideas?
Thanks
ClareAll of your apps should be in iTunes on the computer, simply sync them back.
If they are not, go into the purchase history and download them again. -
I have an iphone 5, and the battery is so bad! I was just wonder if anyone had used an external battery before? are they good? can they do damage to your phone? what's the best one to get? any help would be great thanks!
I'd just like to say that ahs70's post on Dec 1, 2013 at 1:17am on Pg. 9 worked for me as well: https://discussions.apple.com/thread/5338609?start=120&tstart=0
If your iPhone's battery is acting up you need to determine if it's a software issue or a hardware/battery issue. To do that, after syncing your iPhone, erase/hard reset all data and settings from your iPhone to what it was from the factory as new. This can be found in Settings/General/Reset/Erase All Content and Settings. Then test it out for a day or two. If it's still acting up then it's likely a hardware issue and you will need to get your battery replaced. If your warranty is done than check out this link to get a battery kit to replace your iPhone battery yourself: http://www.ifixit.com/Store/iPhone/iPhone-5-Replacement-Battery/IF118-001#produc tDescription
If your iPhone is now working properly after hard resetting it than it's most likely a software issue. This battery issue only started after upgrading to the new iOs7, so it is obviously related to the update not properly installing itself. What has worked for me and many others is to manually update to iOS 7.0.4 using the full downloaded version of the update which is about 1.32 Gigs.
But first you need to find out what model of iPhone you have, click here to determine if it's GSM or CDMA: http://support.apple.com/kb/HT3939?viewlocale=en_US&locale=en_US
Then go here and scroll down to download the iOS 7.0.4 complete update for your device: http://www.downloadios7.org/download-ios-7-0-4-ipsw-file.html
Then scroll up on the download page and follow the instructions of updating your iPhone manually following the instructions below: "IPSW with iTunes"
And your done.
Problem solved.
I only posted this because it was a very frustrating problem that no one really seemed to figure out a solution for.
I hope this helps.
Emile Beaulieu -
I cannot send an email from my iPad 2? No problem receiving, why does this happen? Have tried the suggestions for setting up email and after doing the sync mail through iTunes receiving worked great but still cannot send? Any help would be great!
The fact that you can receive means you have a valid e mail address, and have established the connection to the incoming server, so all of that works. Since the send does not work, that means your outgoing server is rejecting whatever settings you used formthe outgoing set up. Try them again.
Google your particular isp, and ipad and many times you will find the exact settings needed for your isp. Or tell us here, and soneone else may be on the same isp. Some mail services need you to change a port, or have a unique name for the outgoing server.
Kep trying. -
I have GarageBand for iPad 2 and noticed that there are far fewer loops for iPad than for apple laptops. Is there a library available of apple loops? I haven't been able to find any if there are. Any help would be greatly appreciated.
Update: An Apple rep called me today to update the status of my return. I was told that the replacements for the BLACK iPad 2's was still another 3 weeks out (at least) so they offered me a brand new WHITE 16GB iPad 2. I could have that or continue waiting. I opted to go ahead and accept the offer of a new white one. Worst case scenario if I don't like the white one I have buddy that just bought a 16GB black one that he would be willing to swap it.
-
I installed itunes 11 and now it will not open any help would be GREATLY appreciated!!!
Hi
Can you use the mouse to access and start System Preferences?
When you rest the mouse over a dock icon, does its name pop up?
What happens if you open an application by ctrl-clicking on the icon then selecting Open?
Bob -
I have a dynamic table that calculates the sum of all rows, no issue. I'm struggling with pulling out a subtotal though. I would like to have a check box in each row that flags those rows and gives the sum of their total. Any help would be greatly appreciated.
Here's something I threw together rq. The script is in the change event for the checkbox in the table. (Of course, you'll have to modify it to suit the names of your fields.)
var rows = xfa.resolveNodes("tblAmounts.Row1[*]");
var subtotal=0;
for (i=0; i<rows.length; i++) if (rows.item(i).cbAdd.rawValue == 1) subtotal = subtotal + rows.item(i).nfAmount.rawValue;
nfSubtotal.rawVlaue=subtotal; -
Lightroom 5.6 When I try to publish the photos from Lightroom to SmugMug I get an error Canceling task at the top left side and the photos are not published. I have published photos before just last week so not sure whats going on. Any help would be great.
See my first post in this topic:
https://discussions.apple.com/message/21371126#21371126
Trashing the preference file may help, as I've outlined in the topic I've linked to. Otherwise, follow the steps regarding removing 3rd party QuickTime components. Also, see the final post by the OP (EEye87) regarding how his problem was resolved (a combination of trashing the preference file and the 3ivx component).
John -
I have two iPads and one is connected to the internet but my other iPad was connected then was not and since then I have not been able to add my internet back onto my iPad it only says cannot connect to the server any help would be great thanks
If you are having WiFi problems it is necessary to isolate whether the problem is with your network or your iPad. Note: Do NOT consider your network to be blameless if some other devices can connect to it.
First, test your iPad on some other WiFi networks: a friends, Starbucks, Barnes & Noble, etc.
If it works well there then the problem is probably with your network. Try restarting your WiFi router by removing power for 30 seconds. If that does not help check for a firmware update for your router. If none exists which corrects the problem consider replacing the router.
If your iPad does not function well on other networks it possibly has a hardware problem. You could try Settings > General > Reset > Reset Network Settings to see if that corrects the problem. If not, contact Apple Support or visit an Apple store for evaluation. They can provide a replacement if your iPad is bad.
If you need more help please give the make, model, and version of your WiFi router and how you have it configured. -
I have Photoshop CS5 Extended and it says updates available but when i download the updates it says updates failed please try again later, i have tried a few times and get the same message any help would be great i am running 64bit on windows 8.
I am running Windows 7 64 bit ultimate and have the same problem. My hard drive crashed, installed a new one and then reinstalled CS5 extended. Installation went fine, but can no longer open my camera RAW files from Photoshop (camera is a Canon EOS T2i. The message also tells me I am not eligible for the update. I am... and I cannot open my files and I could before. I can find nowhere to contact Adobe to tell me how to proceed. My daughter is all a registered user of the same product and she had no problems upgrading... we purchased ours each at the same time. I do know the difference is that I had to reinstall and she did not. If that means anything.
-
I have an iphone 4s and i keep getting an error message when ever i try to activate i have already restored the phone and it still will not work. any help would be greatly appreciated
Activation issues are almost always the result of a device that has been hacked or jailbroken. If that is the case, no support can be provided here.
-
I have an ipod 2 just bought an ipod air and would like to transfer everything over from ipod 2. i backed up the 2 in itunes and when i connect the air it does not even show up. any help would be greatly appreciated.
sorry not ipod 2 but an ipad 2
-
I purchased illustrator online and followed download instructions, it prompted me to download a trial, I did, now i cannot download the purchased product or register my lic #, any help would be great.
You might try here for more direct help
Downloading, Installing, Setting Up -
I have a anion ixus camera with sd card and an iPad mini. I'm going travelling and need a way to upload pics to a cloud or Dropbox. Any help would be great.
That should read canon
Maybe you are looking for
-
Video freezes in Final Cut Pro
Anyone else out there have the periodic issue I've had with video I'm editing simply freezing after a certain period of time (10- 60 minutes) in the timeline. The audio will continue to play, but the video just stutters or completely freezes. Quittin
-
Oracle VM 3.1.1 server install hangs
OVM 3.1.1 64 bit i7 cpu Hi, I'm trying to instal OVM on n server. But it hangs at different stages. I have searched the web and came across guys that had similar issues and and went ovm 2.2 and passing kernel parameters before the install. http://som
-
Hi I'm using TDMS format to my project. I succedd to log the whole data into TDMS file by using the DAQmxConfigureLogging(taskHandle, logFile.toAscii().constData() ,DAQmx_Val_LogAndRead,"GroupName",DAQmx_Val_OpenOrCreate) Now my problem is that when
-
[SOLVED] kid3 2.1-1 crash
Hi, When open kid3 in a shell: kid3 kid3: error while loading shared libraries: libchromaprint.so.0: cannot open shared object file: No such file or directory Last edited by ugaciaka (2012-05-13 12:48:33)
-
Unable to create Temp table in Data mover
Hi dudes, i tried to create a Temp table in Datamover but could not. i have tried to run it in user mode as well as bootstrap mode, even though not get success. i have added my sample datamover script, please go through the scripts and notice my erro