I have to restart ipad each time for internet access. Why?

I have to restart ipad each time for internet access and some games. Never happened until about 2 weeks ago. ?

Firefox is a browser: it doesn't require you to 'sign in'.
It sounds to me like you have some kind of malware installed if you're required to 'sign in' every time you use it.
I'd recommend you use Internet Explorer (''assuming that doesn't require you to 'sign in' too'') to go to http://www.malwarebytes.org/ and download the free version. It will quarantine any malware it finds so restart Firefox afterwards to see whether the problem recurs or not.

Similar Messages

For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

For the past few weeks when I place a bid on ebay, Firefox crashes. The bid goes through but I have to restart Firefox each time. I have sent a report each time and asked to be notified and as of yet I have not got a solution to this problem.

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. Please help!

Safari and firefox stop working after a few minutes of browsing, regardless of what site I'm on. I have to restart my computer to get internet access again but it only works for a few more minutes, then I have to restart again. I don't get a spinning ball, it just stops working at whatever page it's on. I can close the program just fine but when I re-open it, either safari or firefox, it freezes trying to load the hompage. This started a few days ago after trying to stream a movie on my computer. I'm on a Mac Air OS X Version 10.6.8 and have downloaded all updates. When I go into finder, it says I have over 80 gigs available. Is there some other memory cache that I need to check? Thanks so much for your help.

ejwoodall wrote:
It's not a router problem as I explained in my post. If it was a router problem then I wouldn't have the problem everywhere I go. It is an issue with the software.
Then I guess the millions of people running 10.5.7 with no issues are just hallucinating that their machines are working fine?
I'm not trying to belittle your issues; you're certainly having them and I know first hand how annoying an intermittent AirPort issue can be. (In fact, mine was due to an AirPort driver bug that no one else seemed to suffer from.)
The single best diagnostic you could do is take your system running 10.5.7 to an Apple Store, and try using their in-store network.
If your machine performs flawlessly, it may be a router issue.
If your machine has connectivity issues there, it may be a hardware problem with your machine.
There have been numerous people in multiple threads over the years who swore that an update was buggy because things used to work, but returned later to sheepishly admit that they took their machine in, a problem was found and fixed, and now their Mac works flawlessly with the newer software.
But simply reinstalling 10.5.5 in no way means the explanation of how firmware bugs may be at play here is incorrect.
In the context of that explanation, all you've done is possibly reinstall software that asks to add "2 + 3."

I lose my bookmarks, each time I reboot my PC. I have to restore them each time, don't know why

I lose my bookmarks, each time I reboot my PC. I have to restore them each time, I open firefox, don't know why

The home icon by default has moved to the right hand side of the navigation toolbar.
In Firefox 4 by default the Stop, Go and Reload (Refresh) buttons are combined and attached to the right hand edge of the location bar.
When you are typing in the location bar it will show the Go button. When a site is loading it shows the Stop button. At other times it shows the Reload button.
If you want separate buttons stop/go/reload buttons, or want to move the home button, right-click on a toolbar and choose Customize, you can then drag and drop the buttons and place them elsewhere. If you place them in the order "Reload-Stop" on the right hand edge of the location bar they will be combined again. For more details on customizing the toolbar see https://support.mozilla.com/kb/How+to+customize+the+toolbar

Will not start, have to restart computer each time

Browser will not start. I have to restart my computer each time to use the fire fox browser.
This just happened a few days ago.It's very frustrating.
I recently downloaded new updates for fire fox.

IOS: Syncing with iTunes
http://support.apple.com/kb/HT1386
Apple - Support - iPad - Syncing
http://www.apple.com/support/ipad/syncing/
 Cheers, Tom

How to get iphones / ipad user agent for internet access

Hi.
We recently setup some wireless, and I'm wondering how I can get iphones and ipads connected to the internet without prompting for a username and password. Even if it does prompt and we put in our domain credentials, things don't work.. it's like it heavily restricts access. However if you put DOMAINNAME\ in front of your user name, then it seems to work.
Without making static IP reservations and attaching those ip's to no authentication in IronPort... isn't there a way to assign these devices to a policy via their user agent string? Problem is finding that string amongst different versions of iphones and ipads.
I visited www.ipchicken.com on my iphone and it said Browser: Mozilla/5.0 (iPhone; U; CPU iPhone OS 4_3_2 like Mac OS X; en-us)
AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8H7 Safari/6533.18.5
What part of this do I copy into the user agents field for my no autnentication identity that I'm trying to alter? I tried putting AppleWebKit in, but it still blocks almost everything.
Right now in this Allowed User Agents identiy i have Windows Update checked, as well as these:
(MSOffice\x2014)
Microsoft NCSI
SSLSoapClient
AppleWebKit (does not seem to work)
Thanks for the help!

I think I figured it out. Followed this closely:
https://ironport.custhelp.com/cgi-bin/ironport.cfg/php/enduser/std_adp.php?p_faqid=1426&p_sid=ODIeCGuk&p_lva=1713&p_li=cF91c2VyaWQ9MXJvblAwcnQmcF9wYXNzd2Q9Zm8wQmE1
Also do you guys know if the custom user agent field can accept wildcards? Problem is, every version of iOS for iPhone 1, 3G, 3GS, 4, and iPad 1 & 2, or ipod touch (various generations) all have variations in their user strings. If I could just do a blanket statement for like *iphone* , *ipad*, etc.... that would be easier.
So are there any wildcards or txt masks that can be put in and interpreted in the custom user agents field?

Have to change setting each time for speaker and headphone

speaker and earphone are working properly but if speaker is connected then i insert my earphone it doesnt work and then i have to go change the setting to headphone then when i unplugge the headphone i have to change the setting to speaker

HP Pavilion 14-E006tu Laptop (3rd Gen Intel Core I5 3230M - 4GB - 500GB - 14" - Windows 8)
Sparkles1 wrote:
Hi daneil_dan,
Welcome to the HP forum!!
For you to have the best experience, I would like to direct your attention to Learn How to Use the Forum and More.
I understand that you would like some assistance with your audio settings. Would you provide me some additional information? The exact model of computer you have and the operating system. How Do I Find My Model Number or Product Number?
Sparkles1 wrote:
Hi daneil_dan,
Welcome to the HP forum!!
For you to have the best experience, I would like to direct your attention to Learn How to Use the Forum and More.
I understand that you would like some assistance with your audio settings. Would you provide me some additional information? The exact model of computer you have and the operating system. How Do I Find My Model Number or Product Number?
HP Pavilion 14-E006tu Laptop (3rd Gen Intel Core I5 3230M - 4GB - 500GB - 14" - Windows 8)

Hi, I have recently done some online updates and now I have to restart my mac each time for the stupid thing to recognise my internet settings. Any help gratefully accepted.

Hi, I have recently done some online updates and now I have to restart my mac each time for the stupid thing to recognise my internet settings. Any help gratefully accepted.

Please be specific about the updates.
Were they Apple updates from Software Update or were they downloaded updates, including 3rd party updates from a website (Including Apple's)?

For some reason my Firefox is no longer allowing me to stay logged on to certain sites e.g. Even though I now allows click the keep the keep me logged in on facebook I now have to log on each time. How do I fix this. Kind regards Bev Greene

For some reason my Firefox is no longer allowing me to stay logged on to certain sites e.g. Even though I now allows click the keep the keep me logged in on facebook I now have to log on each time. How do I fix this.
Kind regards
Bev Greene

Websites remembering you and automatically log you in is stored in a cookie.
* Create an allow cookie exception (Tools > Options > Privacy > Cookies: Exceptions) to keep such a cookie, especially for secure websites and if cookies expire when Firefox is closed.
Make sure that you do not run Firefox in Private Browsing mode.
* https://support.mozilla.com/kb/Private+Browsing
* In [[Private Browsing]] mode all cookies are session cookies that expire if that session is ended, so websites won't remember you.
* Do not use [[Clear Recent History]] to clear the "Cookies" and the "Site Preferences"
Clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, and passwords.
* http://kb.mozillazine.org/Cookies

After upgrade I lost yahoo email I have deleted account and restarted iPad several times

After latest upgrade I lost email. I have deleted account and restarted iPad several times.

did you add the account again ?
and did you try to add the account manually rather then letting it auto detect the settings
there could be issues with their server I often get that both in ios and OS X and windows

HT201209 I have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request, an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.

have itunes vouchers and each time i click redeem , I get error "we could not complete your itunes store request, an unknown error occured 1202, try again later. I have tried this for 4 days running and get same error.

I have this same problem. It's like it is not Authorizing this Mac.
What happens when you try to listen to a preview on the Music Store?
Mine asks me to authorize again and gives me the error exactly as you said above.
What happens when you try to view your account information (in Music Store, click on your account name in the top right corner)?
Mine lets me authorize sucessfully and shows me my account information.
I have emailed iTunes support about this and they replied with a generic answer about Deauthorizing and re-authorizing the computer.
I even tried, to no avail, the tips here...
http://discussions.apple.com/thread.jspa?threadID=471237&tstart=30
If anybody reads all this and has any new info for us, please take the time to post it here!
PowerMac G4 Mac OS X (10.4.6)

Have to restart iTunes EVERY time I want to stream to Apple TV!

I have the 2012 Apple TV and while Netflix, Youtube, etc. normally work well, I have to restart iTunes EVERY time I want to stream to Apple TV! My iMac is always on and the newest version of iTunes is always running. It doesn't seem to matter if the iMac is in sleep mode or not, and I have a very strong wifi signal coming from my Airport Express. Every time - not sometimes - I want to access music, TV shows or movies in iTunes on Apple TV, it says my library is loading, or cannot connect. Every time. What can I do?

WC, When I use the term Home Sharing it is perhaps a little oversimplified, it is quiet impractical and often overkill to continually restate the complete sequence of events that led me to 'a fix', however, I did not suddenly one day find a problem, switch to wi-fi and find all was well. There was significant investigation done on my part to try to find a solution. if by me saying I moved to wifi and it worked, others can move to wifi and have a fix, great. I am not trying to reinvent the wheel here, others much cleverer than me are looking at that...
I had a functioning setup over wired until approx 2 months ago with an ATV2 connecting to Imac library, I was at the time occasionally running some software that restarted itunes once finished which may have masked the problem if it was there, unlikely though. I purchased an ATV3 with a new TV, this upon installation required an ios update much the same time as the itunes update.
I noticed the white light on the atv3 flashing when it was asleep, this was not something i had seen on the atv2, Investigation suggested this was normal behaviour, I remain unconvinced of this.
from that point on 'Home Sharing' did not work until a restart of itunes, it would then work all night (6+ hours)
My mac was set to sleep over night, I tried turning that off-no difference, turned ip6 off-no difference, once it hangs other devices on the network are unable to see the itunes lib, iphone, ipad,MBP etc
Once the thing hangs, Netstat shows a massive quantity of open ports 100/150+ to each on/sleeping atv, a restart of itunes clears this lot. with wired, these connections start to build again, with wireless not so much.
looking back on here shows folks have had this problem in various guises since early 2011, apple by their own admission state the last update 'fixes some issues with Home Sharing', it seems it introduced some for me...
I am quite sure some peoples problems are down to underlying network problems however this is supposed to be 'Home Sharing' it shouldnt need a degree in computer science to configure, it should just work.
I am not about to pull my network apart to troubleshoot any further, between mac & atv's there are 2 x Giga/switches(netgear) and an Airport Extreme(bridged), the atv cable was plugged into the A.Ex no dice and now connects w/less to the same box and works fine...

Have to reinstall iTunes each time I want to sync

So I upgraded all my software and finally got my iPad 2 to sync, but now I have to reinstall iTunes each time I want to sync either my iPad or my iPod. It's not as much of a hardship as some of the folks are having in these discussions but it doesn't seem...well...right. Any suggestions?

Have you looked at this article:
http://support.apple.com/kb/TS3540
(Mac OS X v10.6 or later: iOS device not recognized in iTunes after restart)

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to X. any reasons why its doing that and how to fix it.

Macbook air Wi Fi and sound stops every time it goes to sleep. i have to restart it every time to use wifi and sounds. this started happening just after the latest upgrade to OS X. any reasons why its doing that and how to fix it.

Test after taking each of the following steps. Back up all data before making any changes.
1. Make sure the network is on the preferred list by following these instructions. It's important to read the article carefully, as it's the starting point for any further efforts to solve the problem. If you skip any of the steps, the problem may not be solved.
2. Follow the instructions in this support article under the heading "Symptom: The network connection drops unexpectedly."
3. Make a note of all your settings for Wi-Fi in the Network preference pane, then delete the connection from the connection list and recreate it with the same settings. You do this by clicking the plus-sign icon below the connection list, and selecting Wi-Fi as the interface in the sheet that opens. Select Join other network from the Network Name menu, then select your network. Enter the password when prompted and save it in the keychain.
4. From the Location menu at the top of the Network preference pane, select Edit Locations. A sheet will drop down. Click the plus-sign button to create a new location. Give it any name you want. In the new location, set up the Wi-Fi service with the same settings you used before. Click Apply and test.
5. Launch the Keychain Access application. Search for and delete all AirPort network password items that refer to the network. Make a note of the password first.
6. In some cases, the problem has been resolved by repairing permissions on the startup volume.
7. Turn off Bluetooth and test.
8. Reinstall OS X.

Resetting CMOS Each Time for Boot

Not sure where to begin. This is my second or third build. I never had problems until now. They were always smooth sailing till now. I have my computer specs listed below. Just going to explain what is going on. I just received my new RMA from newegg for this board. MSI 990FXA-GD80 V2 AM3+. When I first boot it up, works perfectly fine. But once I restart the computer it will not display anything on the monitor. Just a black screen. I have to clear the CMOS each time for it to finally boot up in the bios. I've tried manually setting some of the voltages but I'm no expert in this. I'm really hoping I'm just a complete retard and I'm missing something very important. I haven't been able to work on this computer that much because I've been so busy and I'm cutting it close at this point for a 30 Day RMA through Amazon for certain parts. Than I have some from newegg cutting it close. Ill be staying up till about 3am tonight so hopefully I can get something done or in the right direction.
I have tested the board outside of the case it does the same thing.
I haven't tested the PSU because I don't have the tools or an extra PSU unfortunately.
I'm hoping its something simple, but... I know it probably won't be.
Computer Specs
MSI 990FXA-GD80 V2 AM3+ Bios V13.1
RAM Ballistix Crucial 4GBx2 1.35V DDR3-1600
FX-8350 CPU AMD Black Edition
GTX 650 TI BOOST
2 SSD 160 GB Vertex 2
2 HDD 1 TB WD
Storm Stryker White Edition
EVGA SuperNOVA 1300G2

Quote from: badboy2k on 21-July-13, 11:31:35
try with a single stick of ram and see if it does the same (that board may not like your low ram voltage of 1.35v)! (seen that happening lately with AMD board and low power RAM doesn't seem to happen with 1.5v) <--- go into your bios and set your ram voltage to 1.5V and see if it stops?
I would love to have your babies now... I tried that earlier but I was doing 1.35v. I was going to do the 1.5V but I was afraid to. Because I wasn't sure if I could really pump that much into it. Its now coming up trying to start my previous OS now. Keeps saying start up normally than that doesn't work. But I'm pretty sure I just need to delete the partition again and start over for that. I already have a flash drive ready for this. But ill need to set up RAID now lol. I've booted it several times now without having to reset the CMOS. It also has both sticks in there now.

I have to restart ipad each time for internet access. Why?

Similar Messages

Maybe you are looking for