I have to twist the lid to make contact macbook air
I'm new to this site. I have a 2009 mackbook air. It developed vertical lines on a white screen. I thought it was the video processess. I replaced the logic board and booted the machine to discover the same issue. As I was closing the lid, I noticed the screen came back to normal with log in window. You have to hold the lid in the twisted position to make contact. Does anyone know the problem?
nicky3477 wrote:
I guess I meant to say dispay. I've tried every position to fully open. Nothing works but twisting the upper half to make contact. Weird! Delamination?
twisting the upper half to make contact. ........... with what? The bottom chassis, or does not the display assy. close flush and even with the lower chassis.
I presume by "make contact" you rather mean open the fault to feed the display correct.
delamination, no....., however are you saying twist rather than TORQUE?
twisting laterally the entire display and the occurrence = display feeds
to torque the entire display assy. (bend it) and have the occurrence = inverter board feeds in the display assy.
either way its the display assy.
However you did NOT answer the only important question:
Is it only coming on immediately before closing? If so you have a defective reed sensor switch.
Since you replaced the Logic board yourself, obviously its good you have repair skills, as do I.
In which case to determine if its the reed switch OR the display assy. Apple can diagnose your Air for you in shop no charge if yo make an appt.
Similar Messages
-
I have problems with the function keys of my MacBook Air 13" Mid2011
i have this problem, anybody can help me? THANKS!!!
If the center portion of the monitor is flickering then your GPU on the logic is bad or (unlikely given this symptom) that your monitor cable is pinched/damaged.
**Imediately backup ALL your important data while you can still see things on the monitor
Contact Apple for appt. for in shop diagnostics for full examination and for parts replacement
nobody can give you a cost on a repair that isnt fully diagnosed online and cannot be.
perform SMC reset just to check:
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer. -
How do I make the internal mic on my macbook air sustain better when recording on garage band? I have been recording an acoustic guitar and listening back, the mic seems to pick it up well naturally for 1 or 2 seconds then dramatically drop out.
I realised that you just need to go to System Preferences > Sound > Input > and uncheck 'Use ambient noise reduction'. mmm answered my own question.
-
Is it possible to have the lid open on a MacBook Pro connected to a Cinema Display and have the Mac display blank with the Cinema in highest definition?
Hi,
Create a play list that you wish to burn. Select playlist, the file from main menu which gives to an option to burn the playlist. A pop up box appears allowing you to select burn speed and disc format.
Jim -
When I close the lid on my retina MacBook Pro with Thunderbolt and it goes to sleep, I cannot wake it without shutting it down and restarting it. Called Apple tech and they did not have a solution. Any ideas?
Try these places:
MacBook Pro
https://discussions.apple.com/community/notebooks/macbook_pro
https://discussions.apple.com/community/mac_os?view=discussions
http://www.apple.com/support/macbookpro
Mac OS X Help
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
TimeMachine 101
https://support.apple.com/kb/HT1427
Mac OS X & Mountain Lion Community
https://discussions.apple.com/community/mac_os
https://discussions.apple.com/community/mac_os/os_x_mountain_lion?view=discussio ns
Recovery Mode
http://support.apple.com/kb/HT4718 -
Why does my screen turns black and I have to reset the phone to make it work?
My phone is fully charged when suddenly the screen turns black it doesnt matter if I push the buttons the screen still is black, I have to reset the phone to make it work. When the screen is black and if you call you can hear is ringing but my phone does not sound.
I had a bad experience with this phone, to tell you the truth I dont even want it anymore, I have other apple products and they are excellent and had worked fine but the iphone is a dissapointment to me.Go to an Apple store.
-
have just created my Apple ID on my MacBook Air and I wanted to activate my Face Time. When signing in on Face Time, it keeps saying "The server encountered an error in processing registration. Try later". Can someone please help me?
ThanksHello,
First make sure your Date & Time are correct, & whether AM or PM if using 12 hour clock.
See these...
http://support.apple.com/kb/TS3970?viewlocale=en_US
http://conpartior.wordpress.com/2012/08/22/imessage-could-not-sign-in-imessage-t he-server-encountered-an-error-processing-registration-please-try-again-later-so lve/
https://discussions.apple.com/thread/4314177?tstart=0 -
hello i have started using iphone 5 for which i downloaded my contacts from i clouds i am not able to get name of the person when he is calling for which i have already saved the no. on my contact list i have reseted my phone twice its only showing the names of the person whose no. i have saved it with the country code i am staying in india new delhi pls help me i am fed up not able to get the name of person who is calling
Sir, your Apple ID can be used as an iCloud account as well. They are both the same thing.
You can learn more from --> Set up your Apple ID for iCloud and iTunes - Apple Support -
I am unable to see the airplay icon on my macbook air, iphone or iPad which would enable me to use my Bose speaker through airplay. I set this up in the UK but have taken my macbook and bose speaker travelling with through Thailand. Ive wifi in my room and am able to access the internet on my laptop, Ive also been able to through the Bose Soundlink air wifi set application connect the bose speaker to the Wifi too.
I am only able to play my itunes through my macbook speakers and cannot find the airplay button which should be next to the volume slide once turned down to less than 1/3 of the volume..Thanks for your help. Since I'm uninterested in loading all my photos (the only option) into photostream, I won't be able to use the settings in ATV. I guess I'm just stuck with using iPhoto on my MB Air. Thanks again.
paul -
I have replaced my faulty hard drive on my macbook air 1.1 with a new ssd, I need to reinstall the original software,where can I find this on the apple site?
There is no download for the software. The factory software that you are looking for is called ilife. It is all of the software that would have came preinstalled with your mac on your original hard drive when you first bought it. You will have to get new software on your computer. This might actually be a great opurtunity to upgrade to Lions. Search the Lions software in the mac store and it will come up. Click add to cart and check out. The price for it is $20. I defientely recomend Lions, it has alot of new great features. Then wate for the install disk to come in the mail. when it come just pop it in and follow the step by step instructions. If you dont want to upgrade to lions however you can download the ilife package from apple.com for a small price. Hope this helps.
-
I have an external camera, IceCam2, connected to my MacBook Air, but I cant switch to the camera when I try to use videocam on a websayt. How do I switch from internal to externl camera? In use is Adobe Flash Player, but I cant open that program, is the s
I think the McAfee suite will do the trick when I pay them a one-time fee of $69 or $179 for a year for unlimited support.
Your call of course but IMO a waste of money. Please read this first:
There are many forms of ‘Malware’ that can affect a computer system, of which ‘a virus’ is but one type, ‘trojans’ another. Using the strict definition of a computer virus, no viruses that can attack OS X have so far been detected 'in the wild', i.e. in anything other than laboratory conditions. The same is not true of other forms of malware, such as Trojans. Whilst it is a fairly safe bet that your Mac has NOT been infected by a virus, it may have another security-related problem, but more likely a technical problem unrelated to any malware threat.
You may find this User Tip on Viruses, Trojan Detection and Removal, as well as general Internet Security and Privacy, useful:
https://discussions.apple.com/docs/DOC-2435
The User Tip (which you are welcome to print out and retain for future reference) seeks to offer guidance on the main security threats and how to avoid them.
More useful information can also be found here:
http://www.reedcorner.net/mmg/ -
I am having trouble with the "numbers" app on my MacBook Air. I go to print my document and that works just fine. I cannot however return to the document after printing. What do I have to do?
RR,
Not to worry, you're not the first to expect Print to finish by returning you to the edit mode. The thing is that Printing is so hit and miss with this version of the app, you will probably want to stay in the Print window for more than one attempt.
Jerry -
I got the new update for my macbook air and know it is saying that i have to pay for pages, numbers, and keynote and it said that it was free before i did the update.Can somebody please help... I need pages for a school report.
If you had the previous version of those apps on your machine then the upgrade is free.
If you didn't have them installed you must purchase them. -
The headphone jack on my macbook air isn't working. I have plugged in two headphones and both won't work although they do work on other devices. Any ideas on how to resolve this problem?
update to latest OSX 10.9.3
reset SMC , you likely put your Air into sleep mode with phones attached.
update the OSX to fix the issue. -
i have mountain lion 10.8.5 but i dont have the messages app on my macbook air. i've looked at all the other discussions and none of them helped. how do i get messages???
thanks for the help gosh nobody can help me
Maybe you are looking for
-
Can more than one apple id use apple tv
I have one computer I use my apple id and iTunes on, my husband uses an external hard rive connected to laptop for his id and our son uses the laptop with his id . We all have our own iTunes. We haven't quite got the hang if home sharing and I was th
-
BI Projects Report Not showing data
Hi I am a new to BI.I am trying to configure BI for Oracle Projects.So the problem here is couple of reports are not loading data on dashboard. The issue is with Most of report that use data from Organization table 1.My BI is integrated with EBS.(I a
-
Hi SAP gurus !! I need Help/inputs on the following business Process: We are into manufacturing & selling of Diesel Locomotive Engines. These Engines & its subcomponents first we assemble at a remote place far from main Plant. once the Engine is rea
-
SOA Purge using delete_instances on SNAP
Hi, We have SOA 11g 11.1.1.5. In our Production Database our SOA schema size is over 1.5 TB. The current purge script we have is not deleting all the instances and so the Database size is growing. We decided to use the below as we really don't need a
-
Total Entered Qty Exeeds Approved Qty_ Material Issue
Dear All, Kindly help to resolve the following error message. Material/Plant/Sloc 3000005961/1100/WH01>>> Total Entered Qty Exeeds Approved Qty:221.000 Message no. ZMM000 PO Quantity u2013 221 GRN Quantity - 222.3 While issuing, I have entered the GR