I have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

i have tried to update my software but it keeps saying i need the os x 10.5, i downloaded it but it gives me a prompt when i try to click on it saying that my software needs to be updated to 10.5, what do i do?

Hi, and welcome to Apple Support Communities.
Mac OS X 10.5 is not a free download. You have to buy it.
http://www.amazon.com/Mac-OS-Leopard-10-5-10-51/dp/B0012RAVRC
Not all iBooks are compatible with Mac OS X 10.5. Check out the system requirements here:
http://support.apple.com/kb/HT3759?viewlocale=en_US
Good luck.

Similar Messages

  • I have a macbook pro and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    I have a macbook pro, and when i go to watch youtube it says i need the newest flash player, so i download it but then i go back to youtube and it still says i need to download it again. How do I make it work?

    Mdjohnson99,
    have you followed the steps on this Adobe page?

  • I'm trying to install iTunes on my computer running Windows 7 Home Premium.. I'm not sure if iTunes is compatible with it because when I try to install it, it says the installation is complete but it says there was an error so I can't get it! Please help!

    Hellooo Apple Community!
    I'm trying to install iTunes on my computer running Windows 7 Home Premium. I'm not sure if iTunes is compatible with my computer operating system because when I try to install it, it says the installation is completed but it says there was an error so it won't let me get itunes! Can someone please tell me if iTunes can be downloaded and installed on "Windows 7 Home Premium" and if so, how?! I need iTunes asap, I have an iphone 4 running ios 6.1.3. Please get back to mee!!
    Thankyou thankyou thankyou!
    Natalie.

    I just tried running the Lenovo Hard Drive Quick Test both in normal mode and in safe mode.  Both times it indicated a failed read test on the HDD. The last two tests also failed.  I forget what those tests were called.
    I am really beginning to think I have a bad HDD and the problem just happens to be in the reserved partition where my factory system software resides.

  • HT201210 I have tried to restore my iPad2 and it keeps getting stuck in the middle of the process. Iv'e tries restarting my computer and iTunes and my operating system are up to date.

    What do I do?
    Please help!

    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    Update and restore alert messages on iPhone, iPad, and iPod touch
    http://www.buybuyla.com/tech/view/012953a0d412000e.shtml
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • I am unable to update my iTunes. When I try, I get a message saying needed files are on a resource that is unavailable.  How can I remove my current iTunes and reinstall it?

    Hi, I have an iPod Touch 5th generation.
    I have a Windows XP computer.
    I cannot update my version of iTunes.When I try, I get a message saying that the needed files are on a network resource that is not available.
    This has happened before, but has been fixable, but.not by me..
    Can I fix it myself? if so, how? I'd like to uninstall iTunes and reinstall it so I can update it.
    thanks for any help. nanc3

    Try:
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP

  • I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade

    I have a new iphone 5s with ios 7 , I cannot pair with the bluetooth in my BMW with idrive , can anyone help . My old iphone 4 worked fine , however this was initially paired with older software , but still worked after the upgrade . I have tried & tried to pair again & that wont work either , suggesting it is the phones software . Can anyone help please

    Hi there soulboycraney,
    You may find the troubleshooting steps in the article below helpful.
    iOS: Troubleshooting Bluetooth connections
    http://support.apple.com/kb/TS4562
    iOS: Troubleshooting car stereo connections
    http://support.apple.com/kb/ts3581
    -Griff W. 

  • I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    I have downloaded a trail version of adobe acrobat pro and when I try to use it, it says that it cannot be edited in acrobat, please use adobe livecycle designer to edit this form. I can't work out what I need to do?

    Acrobat XI is not distributed with Designer. Designer is now a separate product. You can create forms in Acrobat as an AcroForm or using Forms Central (an online forms program). You can print the form to a new PDF and then recreate the fields in Acrobat using the recognize form fields. You will likely have to fix the form fields, but that would be the process. Generally, once a form is taken to Designer, you can't bring it back without such steps.
    Designer is available with AA8 - AAX, but since is a separate product as I indicated.

  • I have OS 10.6.8 and I've recently downloaded Mountain Lion (10.8.3)... when I try to install, it says that I need version 10.8 to continue... What do I do?

    I have OS 10.6.8 and I've recently downloaded Mountain Lion (10.8.3)... when I try to install, it says that I need version 10.8 to continue... What do I do?

    Open App Store and sign in with your Apple ID. Locate the Mountain Lion installer, purchase Mountain Lion, then download it. It's a 4 GB file. You have downloaded an updater.
    Make Your Own Mountain/Lion Installer
    1. After downloading Mountain/Lion you must first save the Install Mac OS X Mountain/
        Lion application. After Mountain/Lion downloads DO NOT click on the Install button.
        Go to your Applications folder and make a copy of the Mountain/Lion installer. Move
        the copy into your Downloads folder. Now you can click on the Install button. You
        must do this because the installer deletes itself automatically when it finishes
        installing.
    2. Get a USB flash drive that is at least 8 GBs. Prep this flash drive as follows:
      a. Open Disk Utility in your Utilities folder.
      b. After DU loads select your flash drive (this is the entry with the mfgr.'s ID and size) from the left
          side list. Click on the Partition tab in the DU main window.
      c. Under the Volume Scheme heading set the number of partitions from the drop down menu to one.     
          Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the
          partition scheme to GUID then click on the OK button. Click on the Partition button and wait until
          the process has completed.
      d. Select the volume you just created (this is the sub-entry under the drive entry) from the left side
          list. Click on the Erase tab in the DU main window.
      e. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, check the
          button for Zero Data and click on OK to return to the Erase window.
      f. Click on the Erase button. The format process can take up to an hour depending upon the flash
         drive size.
    3. Locate the saved Mountain/Lion installer in your Downloads folder. CTRL- or RIGHT-click on the installer and select Show Package Contents from the contextual menu. Double-click on the Contents folder to open it. Double-click on the SharedSupport folder. In this folder you will see a disc image named InstallESD.dmg.
    4. Plug in your freshly prepared USB flash drive. You are going to clone the content of the InstallESD.dmg disc image to the flash drive as follows:
      a. Double-click on the InstallESD.dmg file to mount it on your Desktop.
      b. Open Disk Utility.
      c. Select the USB flash drive from the left side list.
      d. Click on the Restore tab in the DU main window.
      e. Select the USB flash drive volume from the left side list and drag it to the Destination entry field.
      f. Drag the mounted disc icon from the Desktop into the Source entry field.
      g. Double-check you got it right, then click on the Restore button.
    When the clone is completed you have a fully bootable installer that you can use without having to re-download Mountain/Lion.
    Note: The term Mountain/Lion used above means Lion or Mountain Lion.
    As an alternative to the above (you still have to do your own download of Lion/Mountain Lion) you can try using Lion DiskMaker 2.0 that automates the process of Steps 2 through 4.

  • I have app updates but when I try to do them it says mail is open so unable to restart, I can't see mail open...

    I have app updates but when I try to do them it says mail is open and unable to restart quit mail to continue. I cant see mail open to quit...

    Hi Sarahhh90,
    If you need to force Mail to quit to continue with your updates, you may find the following article helpful:
    OS X: How to quit an unresponsive application using Force Quit
    http://support.apple.com/kb/ht3411
    Regards,
    - Brenden

  • OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF. then 2.  need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that

    OK, I need to be able to have a linked TOC, and also have destinations created in FM10 that will not be lost when I 1. Save the book as a PDF; then 2. I need the PDF to be as small as possible, but without losing my destinations. Anyone know how to do that??
    I had been saving as a PDF and then reducing the size of the PDF by printing it as a PDF with a degree of image compression. I write manuals with a LOT of screen captures and line art that needs to be clear. So it is a balancing act between image clarity and PDF size. The PDFs on the web need to be smaller - sure you can undertsand.
    Anyway, when I print the PDF again, I lose both my destinations and bookmarks.
    Anyone know of any way to avoid that?

    Control the images by creating a custom PDF Job Options and then selecting it in the PDF Job Options drop-down of the PDF setup dialog box (File > Save as PDF...)
    Create the custom PDF Job Options file with Distiller. If you do not have Distiller, open the Printing Preferences of the Adobe PDF printer. Start with the Smallest File Size Job Options settings and Edit.

  • I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browers after quiting and restarting after changing the preferences

    I have enabled pop ups through safari preferences but a website is still saying that they must be enabled. I have tried this on other browsers after quitting and restarting after changing the preferences

    How about extensions? Perhaps you have an adblock extension installed.
    Check Safari > Preferences > Extensions

  • My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    My email account blocks the verify now hyperlink when I try to click and open to verify my apple ID.  I have tried to copy and paste in the browser window, but that doesn't work either.

    Have you tried accessing the email from another computer, device, email client or web browser?

  • HT201210 my iphone says it needs to be restored but when i try to restore it it says it cant be restored and theres an unkown error

    My iphone says it needs to be restored but when i try to restor it it says it cant be restored and it has an unknown error

    Hi folks, just yesterday i can restore my iphone 4 that have a problem when i restore from itunes, when i do the restore from itnes, always showed me the following error:
    01:41:37.0017] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: -1
    [01:41:37.0017]    Depth:1 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - Failed to handle message type StatusMsg)
    [01:41:37.0017]       Depth:2 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - failed to update device firmware)
    [01:41:37.0017]          Depth:3 Error:The operation couldn\U2019t be completed. (AMRestoreErrorDomain error -1 - ramrod firmware update failed)
    [01:41:37.0017]             Depth:4 Error:The operation couldn\U2019t be completed. (RamrodErrorDomain error 1004 - update_baseband: failed to perform next stage)
    [01:41:37.0017]                Depth:5 Error:Exception at :0:
    [01:41:37.0017]           - kBBUReturnTimedOut(8)/16: Pinging timed out
    what I did was this: just when I will finish the process, when the status bar is at the end in the firmware, only put the sim card and go back to take out, I do this like 4 or 5 times and the process restoration ends so well. This method I tried it 2 times and 2 times worked. I spent like 10 hours trying to restore iphone without results, until I started watching the logs and the key is when you are upgrading the firmware sends a command to answer yes. And I hope this helps.
    This is the line of the log that appears and when the restoration is correct:
    amai: AMAuthInstallBasebandHandleUpdaterStatus: commandAccepted: YES
    Regards.

  • I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says:  "...cannot be used because it requires iTunes version 10.7 or later." However when I try to get iTunes to update it says: "This version of iTunes (10.6.3) is

    I just bought an iPhone 5, and tried to sync it to my iTunes account but when connected it says:  “...cannot be used because it requires iTunes version 10.7 or later.” However when I try to get iTunes to update it says: “This version of iTunes (10.6.3) is the current version.” Can anyone help?

    filterc-r wrote:
    Thanks for your reply. My Mac is running 10.5.8: it's 4 years old.  When I try to update the OS software, I'm told there are none available.
    Be careful - there's a difference between update and upgrade.  Your machine is saying there are no updates available, meaning no later versions of OS X 10.5 (Leopard).  However, you can very likely upgrade - at least to OS X 10.6 (Snow Leopard), and possibly then to OS X 10.8 (Mountain Lion).
    Updates are free, but upgrades cost a bit.  That's the dirference.

  • HT1420 I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to

    I have set up iTunes Match on only 3 devices (my Windows 7 desktop and 2 iPhones) and am now trying to authorise my new Windows 8 (Toshiba) laptop but I keep failing to authorise the laptop using my one-and-only Apple ID. Does anyone have advice to solve this problem?!

    Hi all.  I can’t tell you how to solve your iCloud 3.x issues.  Heck, I don’t think they’re even solvable.
    But if you had a previous version of iCloud that was working correctly then I can definitely tell you how to solve the “iCloud Photo Stream is not syncing correctly to my Windows 7 PC” problem.  …without even a re-boot.
    Log out of iCloud 3.0 and uninstall it.
    Open My Computer and then open your C:\ drive.  Go to Tools/Folder Options and click on the View tab.  Select the “Show hidden…” radio button and click on OK.
    Open the Users folder.
    Open your user folder
    Open ProgramData (previously hidden folder)
    Open the Apple folder – not the Apple Computer folder.
    Open the Installer Cache folder
    In Details view sort on Name
    Open the folder for the newest entry for iCloud Control Panel 2.x – probably 2.1.2.8 dated 4/25/2013
    Right click on iCloud64.msi and select Install.
    When finished, the synching between iCloud and your PC will be back to working perfectly as before the 3.0 fiasco.  The pictures will be synched to the same Photostream folder as before the “upgrade”.  Now all you need to do is wait until Apple/Microsoft get this thing fixed and working before you try the 3.x upgrade again.
    I think the iCloud 3.0 software was written by the same folks who wrote healthcare.gov with the main difference being that healthcare.gov might eventually be made to work.
    For those of you who hate to go backwards, think of it as attacking to the rear.  Which would you rather have, the frustration of no synching or everything working on an older version?
    Good luck…

Maybe you are looking for