I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung.  I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S.  How do I switch the 4 to her number once I make the switch to a new 4S?

I have two pnones on my account...my iPhone 4 and my wife's crappy old Samsung.  I pre-ordered an iPhone 4S and plan to give my iPhone 4 to my wife and I will use the new 4S.  How do I switch the 4 to her number once I make the switch to a new 4S?

Just call yur provider and they will set it up with you.
This is what I do, when I get a new iphone and give mine to my wife.

Similar Messages

  • Content Type settings inside a sub-site are going to be ignored, and it will use the parent content type settings

    I have an enterprise site collection with the following content type settings inside the list content type (columns such as security, document type, etc as required):-
    Then I have created a new sub-site of type enterprise wiki, the default list content type for the subsite will look as follow which have the columns such as security, document type as optional :-
    But now if I went to the sub-site and I chose to create a new page, and i leave all the columns empty, then the system will raise an error that the columns such as; security, document type, etc are required. although inside the sub-site content type the
    columns are defined as optional. So seems that the wiki page inside the sub-site is referencing the parent content type and not its own sub-site content type.
    Can anyone advice on this please ?

    Hi John,
    I tested the same scenario per your post, however the columns retained the same settings in sub-site in the same content type.
    I recommend to verify the things below:
    Was the content type you used for creating the page the one created in the parent site?
    Did you create another content type in sub-site based on the one created in parent site? I recommend to click the column name to go inside the column settings and then check if the Optional is selected. If yes,
     change it and click OK, then change it back to Optional again to see if the issue still occurs.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support
    1. no
    2. no. i did not create any content type. i have just create a new subsite of type enterprise wiki , and the content type settings will be same as the parent content type, which have all these columns set as optional. but seems these settings will be ignored
    as these columns will raise an error if i leave them empty. so seems that the subsite's library will use the same settings as its parent site collection library, which have these columns set as required...
    so i have the following , to make things clearer:-
    1. inside the site collection , the content type at the site collection level have these columns as optional.
    2. inside the site collection's library the  list content type copy, have these columns as required.
    3. on the subsite list content type copy, i have these columns as optional. but these columns on the subsite library will be treated as required columns ...

  • I have two apple ID's on my lap top and want to transfer the accounts to my desktop

    Some how I accidentally created 2 apple ID's, and I have apps I have purchased on both.  I currently sync my iPhone with my soon to dying laptop and wish to transfer the accounts to my desktop so I can sync my phone with the desk top.  How can I do that??

    Try syncing songs one at a time to see if there is a problem song(s).
    Do the songs play in iTunes on the computer?

  • Apparently Sync Manager is turned off for syncing my contacts and calendar to using Blackberry Desktop Software - how can I switch it ON?

    I upgraded to Mac OS 10.9 a few months ago.
    Up till then I was happily able to sync mac Contacts and Calendar to my Blackberry Curve 9320 via Blackberry's Desktop Manager (for Mac).
    Since upgrading the software tells me to that Mac Sync Manager is turned off.  I know it isn't because everything else is syncing.
    When I hunt through your support I find that there are solutions for this problem for other Mac OS versions but not for Maverick, so please tell me how I can once again use my business phone happily as I did before upgrading!
    Many thanks
    Janet

    From
    http://btsc.webapps.blackberry.com/btsc/viewdocument.do;jsessionid=B786F9DEB73FE BE22A4D2F911A97BC3C?externalId=KB35311&sliceId=2&cmd=displayKC&docType=kc&noCoun t=true&ViewedDocsListHelper=com.kanisa.apps.common.BaseViewedDocsListHelperImpl
    BlackBerry Desktop Software utilizes Apple's SyncServices technology in order to synchronize Contact, Calendar, Notes, and Tasks information to and from the Mac computer.
    BlackBerry Desktop Software synchronizes information with the SyncServices database, which is synchronized with the desktop applications on the Mac computer (for example: Apple Address Book, iCal, Apple Mail, Microsoft Outlook for Mac). BlackBerry Desktop Software does not synchronize directly to or from the desktop applications on the Mac computer.
    Mac OS X Mavericks v10.9 and later does not use SyncServices, therefore, it is not possible to synchronize Contact or Calendar information using the BlackBerry Desktop Software on these versions of OS X.
    For more information on SyncServices and OS X Mavericks, see the following Apple Support article:
    http://support.apple.com/kb/HT5847
    Note: BlackBerry Desktop software 2.4 is still supported for use with Mac OS X v10.6, 10.7, and 10.8.
    Pete

  • How can i remove my Photo Library ? i have two folders inside Photos which are Photo Library and Camera Roll, i can't remember how Photo Library got there but i wanna remove that folder and the photos inside + i really messed up

    someone told me to try iFunbox and delete thumbs file from filesystem so i did and now i have the same pics but only thumbnails when i click on one of them its black screen.
    mow after restarting my phone and syncing all photos and videos from camera roll are gone i think i messed up so bad and photo library folder looks so messy like a long black screen
    can someone tell me what to do ? i don't wanna restore and lose all my apps/games
    thank you

    You cannot remove photo library.
    It will always be there.  This is where all photos synced to iphone reside.
    Have you tried a reset?
    If that fails, then you will likely need to restore.

  • I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

    I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

    I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved

  • My wife and 1 both have new iPhone 4's.  Is it best to use the same apple id so we can share music and photo's?

    my wife and 1 both have new iPhone 4's.  Is it best to use the same apple id so we can share music and photo's?

    Would suggest Seperate Apple IDs  >  http://support.apple.com/kb/HE37
    SHARING iTunes MUSIC
    http://macmost.com/five-ways-to-share-music-in-itunes.html
    Also...Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

    I got a new ipad2 for Christmas and I am unable to get it to accept my password for my wifi. I am using the same password that I have always used for all of my other devices. Can somebody help me????

    Hi there
    I had the same trouble today, I kept entering the sky password but would not accept, my iMac and iPod work ok but just could not get my iPod to work. But I found the fault, the password is case sensitive and mine on sky is in caps, the up arrows on the keypad put the caps on,but after each letter you must put the caps back or it wil revert to lower case, I hope this may help you

  • HT201342 Will I have the option of using my @me account or my @icloud account or will using the @icloud account take over my @me account rendering the @me account terminated?

    Will I have the option of using my @me account or my @icloud account or will using the @icloud account take over my @me account rendering the @me account terminated?

    The @icloud.com address is additional: your @me.com address will continue to function exactly as before.

  • I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

    I have two personal e-mail accounts and a general account that I have synced to my Mail app, but I keep getting emails sent to the non-personal e-mail because they're on the same server. How can I change that?

    The only ways I know of for email to get sent to an account are:
    1. It was addressed to that account. Someone used that email address to send you the email.
    2. It was forwarded to that account by the account to which it had been addressed. I am not aware of Mail having this feature but it is often a feature provided by your ISP that you can turn on by logging into your account via the Internet and setting it up.  I assume you have not done this, though.
    With several email addresses in the same Mail client, you have to be careful which one you are sending from. If you send from the wrong address, any replies will come back to that same address. I make this mistake all too often.

  • How can I restore my contacts, when I have two phpnes on one account? In icloud are the contacts of the first phone, and in my computer is the back up of my second phone

    How can I restore my comtacts from pc back up when I do have two phones with one account?the i cloud has contacts from one of the phones, and the pc back up from the other?

    Hi Silky-Milky!
    If I understand your question correctly, you are attempting to merge your contacts from your previous phone's backup into your iCloud account, then go back to using your new phone as normal, with the new merged database of contacts. I have an article that can tell you how to do exactly that:
    Recovering iCloud or MobileMe data from iTunes backups for an iOS device
    http://support.apple.com/kb/TS4108
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • I have two iPods under same account information and lost one but when I try and track it only the one that isnt lost shows up, is there somewhere I can go to fix this?

    I have two iPods under same account information and lost one but when I go to track it only the one that isnt lost shows up, is there somewhere I can go to fix this?

    They cannot be tracked unless connected to WiFi.

  • I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and somehow it crashes the mac side peridoically.  I am told I need to "clean" it and reinstall lion using the recovery drive.  will that delete the windows partition too??

    I have a mac book pro with Boot Camp that also runs windows.  I upgraded to Lion and now the mac side crashes/freezes periodically, especially iphoto.  I am told by the genius' that I probably need to "clean" it and reinstall lion using the "recovery drive" which resets everything back to default and reinstalls the lion operating system.  My question is will this also delete the "windows" partition drive and all that data too.  If so that will be a huge pain in the ___ to back up and reinstall boot camp and windows. I want to shoot the lion.

    There is no system like Acronis for the Mac platform. You can try using the buiilt in Disk Utility to create an Image of the complete Mac drive but I have found that this does not work very well as on tryiing to restore it gives errors sometimes.
    You can use SuperDuper or Carbon Copy Cloner to create a bootable Clone of your system partition. But that is only for the System partition and not the complete drive.
    If you use Boot Camp to install Windows on your Mac neither of those two programs will clone the Windows side.
    Neither will Disk utility as Mac's can not create or write to a NTFS partition. So some other program is need for that.

  • I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    I have installed the new up to date itunes which i can open on my PC, however when i connect my ipad or iphone i get an error saying i cannot use the device as the require software isn't installed?? I'm very confused please help......

    Let's try a standalone Apple Mobile Device Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of why it's not installing under normal conditions.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleMobileDeviceSupport.msi (or AppleMobileDeviceSupport64.msi) to do a standalone AMDS install.
    (If it offers you the choice to remove or repair, choose "Remove", and if the uninstall goes through successfully, see if you can reinstall by doubleclicking the AppleMobileDeviceSupport.msi again.)
    Does it install (or uninstall and then reinstall) properly for you? If so, can you get a normal iTunes install to go through properly now?
    If instead you get an error message during the install (or uninstall), let us know what it says. (Precise text, please.)

  • How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    How do i update my camera raw? I can not find the download update I've just brought a new d4s and I'm using the iMac with cs6 version. PLEASE HELP..

    The Adobe auto updater is pretty decent in CS6.  Just go to the Photoshop Help menu > Updates.
    You will be able to update ACR, Photoshop and Bridge right there, if there are in fact updates available.

Maybe you are looking for

  • L_TO_CONFIRM not updating VBBE.  Are there alternatives?

    We are using L_TO_CONFIRM to confirm TOs via RF in our warehouse.  We have also recently upgraded from 6.04/7.01sp5 to 6.17sp5/7.40sp7. Since the upgrade, L_TO_CONFIRM no longer updates VBBE for the source delivery when confirming a TO with differenc

  • SD Invoices

    Hello SAP Gurus, I work mostly on A/R and I have some doubts while creating SD orders and Invoices. 1. What is charateristic value assignment. (this is prompted for when material is given at item) 2. How to know which pricing procedure is used for wh

  • Oracle adapters logs

    I have trying to connect to JDE OneWorld XE using Oracle adapters. I haven't been too successful and am getting soem popups telling me to check the logs. My problem now is where I can find these logs... I have been through all the log files in the J2

  • Oracle 11i iProcurement Workflow

    Here is my challenge: I will receive names in a web service who are authorized approvers of a purchase requisition I need to create a workflow that will allow me to display a drop down list that contains the names I received I know I have to add them

  • "Press any key to boot from disc" error Windows 7

    I've searched the forum, but none of it seems to help. I tried external usb keyboard, it restarts the whole installation. I had no option to choose between fat32 or NTFS. I was trying to partition a 50 gb on 500 gb hdd. Is there any solution to this?