I have updated my phone to 4.3.3 and I was told there would be more bells and whistles. I haven't found more texting sounds. Have I updated my phone wrong or just not completed it all the way? Please help me. Still trying to figure this iphone 3G out.

I have updated my phone to 4.3.3 and I was told there would be more bells and whistles. I haven't found more texting sounds. Have I updated my phone wrong or just not completed it all the way? Please help me. Still trying to figure this iphone 3G out.

You have the iPhone 3GS, not the 3G. The last update to support the iPhone 3G is 4.2.1.
iOS 4.3.3 includes bug fixes etc. There is nothing really special about this update that wasn't introduced in iOS 4.3. iOS 5 is the one to wait for - it will be released in the Autumn/Fall and includes over '200' new features/improvements.
The additional text tines and ringtones were an iPhone 4-only feature.

Similar Messages

  • Curve 8520 won't turn on all the way, please help!

    I have a blackberry curve 8520, i bought it last month sometime.
    I woke up yesterday morning and the balckberry was off, and would not switch on after i pushed down the ON button. So I charged it for a while, and still, it wouldnt switch on. Then, i took it off charge, took out the battery put the battery back in and it rebooted. The loading bar went right to the end, and the logo of my service provider appeared. And that's when it stopped loading. All that will show is the logo, it wont turn off, unless i take the battery out again.
    I had downloaded an app the night before it stopped working off appworld, could that have affected it? I tried to link it to my computer, but it wont let me remove or add applications.
    I did take out the battery for hours, and the SD card. It still wiil only turn on until my service provider's logo.
    PLEASE HELP! Any advice would be helpful. 
    Solved!
    Go to Solution.

    1) Make sure you have Blackberry Desktop Manager installed.
    http://na.blackberry.com/eng/services/desktop/
    2) On your PC, go to Start > Run and copy and paste the following line exactly (meaning with the quotation marks):
    "c:\program files\common files\research in motion\apploader\loader.exe" /nojvm
    3) The Application Loader Wizard will appear -- click "Next."
    4) In the "Connection:" drop-down menu, you should see "USB-PIN: UNKNOWN". Click the "Next" button.
    5) You should then see a list of applications ready to be installed for your Blackberry. Hit Next and Finish and you are well on your way to getting your Blackberry back to life. Congrats! Just don't disconnect anything and let the lengthy process finish completely.
    NOTE: If you do not see a list of applications mentioned in step 5 and instead see the message "The Blackberry Desktop Software does not have Blackberry Device Software for the device that you have connected to the computer. Contact your wireless service provider or system administrator," then you must download Blackberry's Operating System for your carrier and device.
    http://www.blackberryfaq.com/index.php/BlackBerry_Operating_System_Downloads
    Just select the appropriate carrier and network type, select your Blackberry model from the list and download the latest version. Install this download and follow the above steps again and you should be on the right path.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Curve 9300 won't turn on all the way, please help!

    My daughter has a blackberry curve 9300. It froze on her so she tried to reboot it and now its gets 3/4 of the way and reboots again. Ive tried everythings possible like desktop manager and jl_cmder but nothing seems to work. If anyone has any suggestions i would be very greatful

    Hi and Welcome to the Community!
    Please try this sequence...note that, throughout the entire 4h15m process, your BB must remain connected to a known-good wall charger (not PC USB):
    With the battery inside, connect your BB to the wall charger
    Leave it alone for 2 hours, no matter what the LED or the display does
    Remove the battery
    Wait 15 minutes
    Insert the battery
    Wait another 2 hours, no matter what the LED or the display does
    This has been known to "kick start" some BBs.
    It is also possible that your battery or BB has experienced a problem...to test, this sequence is needed:
    Obtain a known good and already fully charged additional battery...use it in your BB and see what happens
    Obtain access to a known good and identical BB...use your battery in it and see what happens
    The results of this will indicate if it's your BB or your battery that has the problem.
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • I have no sound on my envy sleekbook 6 and my sound is turned up all the way please help

    can anybody help please. but its not muted

     Get your Product Number by pressing Fn + Esc key or check the Service Tag attached to bottom.
    Go to the link below.Enter your Product Number .After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & Save the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&​lc=en
    Go into Control Panel,Programs & Features-uninstall IDT software.Restart the laptop. After Windows loads, install IDT audio using the downloaded file.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • No sound.  Mute is not checked, volume all the way up on iTunes and on status bar.  What am I doing wrong or missing?  I restarted last night and it worked before that but not since, any one have any ideas?

    No sound.  Mute is not checked, volume all the way up on iTunes and on status bar.  What am I doing wrong or missing?  I restarted last night and it worked before that but not since, any one have any ideas?
    Thanks, Rob

    First off did you go to System Preferences > Sound > Output > And is the correct output selected?
    Any red light coming out of the headphone jack? If so, you'll need to re-set the little switch in there by inserting a 3.5mm jack carefully in & out 20 odd times. Or grab a toothpick (non-conductive) and a flashlight.
    Tried anything else that produces a sound? On restart do you get the chime? Perhaps check into Audio Midi Setup to ensure your output is selected correctly using the cog at the bottom left.

  • HT1212 my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft

    my kid brother entered the wrong pin on my ipad and now it is disabled and i was told to connect tt itunes for restore but every time i do that it tells me to update the ios but i have downloaded the new ios 7 on my ipad 2 and i also have the soft copy  of the ios on my windows pc. please how can i reload my ipad

    Try using recovery mode
    Recovery mode - Support - Apple

  • My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.

    The problem would seem to be in the firewall in your router.  Have you tried disabling it? I assume you've updated the router firmware, right?  Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.

  • HP Pavilion Slimline s3707c PC will not boot up all the way

    HP Pavilion Slimline s3707c PC will not boot up all the way; gives the following message:
    Entering Setup
    <F10=setup>                          <F11=System Recovery
    <Esc=Boot Menu>                 <F9=Diagnostics>
    Tried to install recovery disc; did not respond.
    [Personal Information Removed]

    Hi wjackson95,
    When you get to the screen mentioned below, can you press the F11 key to enter the Recovery system that is on the hard drive? Alternatively, if you can press F10, you can go into the BIOS and change your boot order to put your disc drive before the hard drive so that the PC boots to your Recovery discs. NOTE: You may have to press F10 or F11 multiple times to get it at the right time.
    You might consider opening your PC to see if it has dust buildup. If your PC has overheated, it can cause it to not boot. It can also cause heat damage to the interal parts.
    For more detailed boot troubleshooting, see this HP Support document:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00899280&cc=us&lc=en&dlc=en&product=3882331
    Let us know how it goes.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • Itunes library will not close down all the way

    My iTunes library will not close down all the way.  When I close the library I am unable to log back in or turn my computer off because itunes is still running although I x'd it out.

    You're right, you shouldn't have to do that.
    Well, you didn't say whether you've tried uninstalling & reinstalling itunes. Make sure it's installed with an admin user account. Then go into the WIndows Event Viewer and see if there are any error messages about any of the itunes processes in the installation package. That could give us a clue of what's going wrong.
    Another thing that could be causing the problem is the "apple push" part of itunes, APSDaemon.exe. Read wiclee's post here about it.
    https://discussions.apple.com/thread/3734882?start=0&tstart=0

  • Hi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    HiHi can you please help me to fix my iPhone 5 when I update it to the iOS 6.1.2 my carrier signal indicator states searching all the time please help me what to do

    Hi Samantha,
    Are you aware that if you restore your ipad that you will lose all data from your ipad and very difficult to get it back unless you had previously made a back-up of your data on itunes or in the cloud. and that would be on the computer you set those up on. (There are some independent apps out there that might help restore data but I don't have any experience with them...)
    Also, I think if you restore on another computer you're supposed to have administrator rights and have the latest itunes update. And I think if you sync (if restoring is considered syncing with another computer, you'll be locked out of your computer or a new one.)
    I don't know if there is a way for you to safely eject your ipad from your mom's laptop and find another way, but please read this
    http://support.apple.com/kb/ts1275
    Also, I suggest you start a new post and title it something like First, stuck on update and now on Restore on another computer. Please HELP! And then tell the story of your problem that you originally included and your follow-up efforts to restore given a suggestion on previous post (though I think you SHOULD AVOID RSTORE if you can.) And refer them to your original post
    https://discussions.apple.com/message/22050045?ac_cid=tw123456#22050045
    Hope this helps and if you can get back to your ios before the upgrade, stay with it. I hope it all works out for you.
    FYI - If it's a new or refurb bought within the past year you might be able to have it replaced by Apple.

  • I update my device and asked me the Claude and I do not know what is the solution please help me

    I update my device and asked me the Claude and I do not know what is the solution please help me note that the issuance of the two is the seventh kind iPhone 4 Q and serial number is 01******343
      Please help me
    <Edited by Host>

    Assuming that you mean iCloud (I don't know what you mean 'issuance of the two is the seventh kind'), then when are you being asked for it and is it your iCloud account's password that you are being asked for or did you buy the phone second-hand ? If it's a used phone and the previous owner left it linked to their account then you will need to contact the previous owner, only they can remove it from their account : http://support.apple.com/kb/TS4515

  • Im gettin flash sms about not enough credit all the time! help :*

    Hi guys im gettin Alerts with BIG DISMISS about not enough credit for service.... ANd im getting it all the time   Please help me without jailbbreak   or something :S  When i press the top button to lock and when i press Home i got it ! always and its annoying i didnt had this problem...  class 0 or flash msg with big green dismiss button about not enough credit LL THE TIME...

    this is not an iphone issue it's an issue with your phone network provider

  • My ipad 1 loses wifi connections when it goes to sllep. have to go into settings to reconnect. Does this all the time. please help.

    my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

    my ipad 1 loses wifi connections when it goes to sleep. have to go into settings to reconnect. Does this all the time. please help.

  • HT1695 Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Wi-Fi to your iPhone does not work with the knowledge that I have worked Restart for the same purpose network does not work What is the solution please help as soon as

    Okay, the Wi-Fi doesn't work.  Turn it on.
    Beyond that, we cannot offer any other assistance as you've failed to provide useful details of the problem.
    When responding, post in your native language as your English makes very little sense.

  • My MacBook Air will not boot up all the way.

    My MacBook Air will not boot up all the way, it only allows me to sign in and then it stays on a white screen. I tried restarting, rebooting, recovery and smc reset. Nothing works, it stays with the same problem. How can I fix this?

    Try a safe boot:
    http://support.apple.com/kb/HT1564?viewlocale=en_US
    Ciao.

Maybe you are looking for