I have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !!
i have updated to the latest itunes and my iphone software to version 5 but now it wont let me sync my custom made ringtones ??? help !! it says it can sync them but then it does not copy them from my itunes back onto my phone ?
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
Similar Messages
-
please help!! i've recently updated to the latest itunes version. after much hassle in doing so, it now tells me that the registry settings for importing or burning CD's/DVD's doesn't work and that i should reinstall itunes. i,ve done that from the website and from a saved position, but it doesn't work. i don't want to have to delete my library to have to start again !!!! there must be another way. it also said that it might be to do with other CD/DVD burning software, but i haven't put any on my computer that itunes didn't seem to lke before
I have the exact same issue. I havent found our what is causing it either. Multaple re-install attempts with no success. I have to use Windows Media Center to burn audio discs. Any other advice?
-
I just tried to delete the new itunes (Hate it & could figure out how to sync iphone any more), and I reverted back to itunes 10.7 64-bit. When I tried to use itunes, it couldnt read the library because it had been created by the newer version (why it didn't get deleted when I removed itunes I do not know), so I deleted a few itune library files that I found still on my computer. Now I have the 10.7, but nothing in it... no library items. How do it get the itunes to sync with the itunes store
This is what you should have done...
To roll back to iTunes 10.7 first download a copy of the installer from here, uninstall iTunes and suppporting software, i.e. Apple Application Support & Apple Mobile Device Support. Reboot. Restore the pre-upgrade version of your library database as per the diagram below, then install iTunes 10.7.
See iTunes Folder Watch for a tool to scan the media folder and catch up with any changes made since the backup file was created.
tt2 -
I updated to the latest iTunes, and now iTunes won't run at all
I downloaded the newest update, and now iTunes won't open at all. I've tried uninstalling and reinstalling, and emptying my "temp" folder, but to no avail. Any ideas?
Well, I fiddled around with things more, and now it's running. I think what made it work was by going to All Programs, where I saw Apple Software Update. I ran that, and it seemed to do the trick. I hope this helps other people with the same problem.
-
I have an older iPod touch that streams my iTunes with iTunes match. My iPhone 4s used to stream as well. Since updating my iPhone I can no longer stream to my phone. Is there a way to back date my operating system on my iPhone so I can stream again or is there an update coming to enable streaming in the near future?
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any Bonjour entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another install. Does it go through this time? -
I just updated to the new Itunes and now my phone will not connect to my computor.
I updated to the new Itunes and my Iphone will not connect to my computor now?
Hi kevin n tracey,
If you are having issues with iTunes after an attempted update, you may find the following articles helpful:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
Regards,
- Brenden -
I have updated to the latest version of iTunes (11.2.2.3). However, when I connect my iPod it shows in My Computer and iTunes opens automatically when the iPod is connected but the device doesn't show in iTunes. Any ideas? I am on Windows 8.1 and my iPod is a Classic
Hi murr18140,
Welcome to the Support Communities! The article below will help you troubleshoot the issue you are having with your iPod classic not being recognized in iTunes for Windows:
iPod: Appears in Windows but not in iTunes
http://support.apple.com/kb/TS1363?viewlocale=en_US
I hope this information helps ....
- Judy -
I have recently updated my iphone to 7.0.2, and i have also downloaded the latest itunes software but everytime i try to sync now, it tellms me to download th latest itunes software. What do i do?
Hi Azeem25,
Welcome to the Support Communities!
What version of Windows do you have on your computer?
You may need to update Windows first, and then try the download from the link below.
Apple - iTunes - Download iTunes Now
http://www.apple.com/itunes/download/
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Managing content manually on iPhone, iPad, and iPod
http://support.apple.com/kb/HT1535
Cheers,
- Judy -
I have the latest iTunes 12.1.2.27. However, I am unable to restore my iphone4s. iTunes was able to detect an iPhone in recovery mode.
The error is something like "Unable to restore the iphone. Make sure you have the latest iTunes and try again." This is the latest version that exists currently.
I am using MAC OS X 10.7.5.
Please advise.
I have tried all the steps in the apple support.There is nothing to backup.
If the device is showing the Connect to iTunes screen, there is nothing on the device to backup.
The first step in the update process is a backup... restore the device using that backup and try again. -
I recently purchased a new labtop a few weeks ago and it came installed with windows 8. I updated the next day to windows 8.1. I then installed itunes and my iPod 5th generation and iPhone 5 were working fine. I then updated to the latest itunes. When I plugged my iPod in, I received a message that my iPod was detected on windows but could not be identified properly. The same thing applies to my iPhone 5. I have uninstalled and reinstalled itunes 3 times, restarted my labtop several times. I have followed most of the advice on these forums and I'm stuck. Nothing is happening. If i plug in my ipod, nothing. If i plug in my iphone nothing. Please help me
Hello there, jlynn84.
The following Knowledge Base articles provides great pointers for troubleshooting the issues your describing:
iPod not recognized in My Computer and in iTunes for Windows
http://support.apple.com/kb/ts1369
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/ts1538
If troubleshooting takes you to the point of uninstalling iTunes, those steps have to be performed in a very particular way for the step to work:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
I have the latest itunes and I use Windows and suddenly, after working fine for years, itunes will not synch with Outlook anymore. Any ideas?
Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I updated to the latest IOS and now my passwords don't work. Reset 4 time which reset for my iPad and iPhone but I cant log into my itunes account using my apple ID it indicates an error, Help?
This may sound crazy, but download any free app. This often "shocks" the other apps into working.
-
I have a PowerMac G3 that's running Tiger OS 10.4.11, iTunes 8.2.1, a Mac mini running Lion 10.7.3, and iTunes 10.5.3. My iPhone is a 3Gs with IOS 4.3.5 and was originally synced to the PowerMac G3. I went to back up my iPhone so that I could install IOS 5 but when I plugged the iPhone into the G3, I got the message saying that I have to download the latest iTunes. The phone wasn't even recognized. What do I need to do at this point? I'm getting pretty frustrated at this point. Any help would be greatly appreciated. Thanks everyone... :-)
Couple of possabilities,
1 - As Andea says, use the MacMini but start a new backup from your 3Gs iPhone, so that you can restore if the upgrade to IOS 5 goes pear shaped. A backup doesn't hold your Apps, Music or Movies, just the settings and App data etc.
2 - Copy your entire iTunes folder from the G3 to the Mini, then when you want to sync the iPhone all the music etc. can be kept in sync as before.
Not sure if you sync your address book, iCal and e-mail from iTunes or via the Cloud, if the former you'd need to put a copy of these also on the Mini
Mike -
help, im trying to update my iphone but it kept saying connect to itunes, i have updated, run the file over and over but its still stuck to connect to itunes, wat can i do? thanx
See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once...
Be sure to Follow ALL the Steps...
But... if the Device has been Modified... this will Not necessarily work -
i downloaded the latest itunes and i recieved a message that the apple mobile device failed to start. It asks me to verify that I have sufficient privileges to start system services. What does this mean and how do I fix this so computer will sync iphone?
You need to follow the instructions of tt2 in https://discussions.apple.com/thread/5822086 to straighten it out.
Maybe you are looking for
-
404 Error when trying Report fault online
Hi, I can't log fault online as I get webpage not found (error 404) when clicking link. Same when using IE or Firefox. I have had no dial tone for a day (just silence). Broadband is intermittent; crashing every few minutes. Have tried removing everyt
-
Hobby website needs help on menu look
Hello, I created a joomla website for my girlfriend as amateur. I'm quite happy with the result besides some minor css mistakes and some ' if I knew that before I would haves'. But the most annoying part is I'm trying to think of something to replace
-
How to make page scroll automatically on click, plz help ASAP
Hi! I need to know how to make a page scroll up or down automatically when i click on an image. Too see example click here: http://www.morphix.si/ I am very new to Dreamweaver and coding, so please be gentle. But I need help A.S.A.P if it's possible!
-
Reserved and non reserved fields.
Hi team, Im a XI consultant . Can you tell me the field names and tables for ....(retaled to material). Reserved amount---- Non reserved amount---- Plant site code---- Material number - MATNR Batch - CHARG from MSEG Status---- PSTAT Material
-
Hi all, I tried to follow the cookbook "Oracle Service Bus 11g Development Cookbook" but found that when I use the latest Eclipse, when I go New-> Others-> type Oracle Service Bus, it didn't exist. Shall I use old version of Eclipse or? Please advis