I have used migration assistant to shift my contents from another Macbook Pro, but are getting an error message 150:30. I have deactivated the software on the old machine and done a restart on the new one, but still get this error message

As above - first time I have used a forum, so thought I had to put all the details into the heading

Migration assistant doesn't move all the necessary files.
You really need to reinstall your Adobe apps on the new system to get all the support files in the right place (and with the right permissions).

Similar Messages

  • I have used migration assistant but new profile is created, how do i merge into one

    I have recently purchased Mac book and have used migration assistant to transfer files from my old windows PC.
    Due to some issues when using migration tool i had to transfer in segments, each time i did this a new user was created.
    I have asked for  some help and was advised that users cannot be merged however the files can be shared via dropbox.
    I have received instructions as to how to do this but am stuck as once I get to the point of dropbox, I do not know what step to take next to add files into dropbox?.
    Below are instructions
    Pick a User Account your going to keep, make sure it's a Admin account and if need to, log into another Admin account and make it so in System Preferences > accounts.
    One logs out of their current account by using the Apple menu > Log out.
    Next while in one of the accounts your later planing on removing, go to the Finder > Go > Computer and window opens.
    Open  the MacintoshHD partition, then the Users folder and the User Account  you plan to keep, then the Public folder and then locate the DropBox  folder for that User. Any files placed in there will change permissions  and be accessible to that user when you log into it.

    The Dropbox folder is a subfolder of the home folder, which has the same name as the user account. It's under the Users folder at the top level of the startup volume ("Macintosh HD," unless you gave it a different name.)

  • Using Migration Assistant to Move Data Files from one Account to New User

    Is it possible or recommended to use Migration Assistant to move data files from an old user account to a new user account on the same volume/hard disk?

    Migration Assitant cannot be used as a simple file transfer utility. MA can transfer an entire Home folder or entire Users folder but not individual files.
    In general files in one user account cannot be moved to another user account as this would violate built-in security measures.
    What you can do is to copy the files to an external device like a hard drive or flash drive. First log in to the old account. Then configure the drive to ignore preferences by Pressing COMMAND-I to open the Get Info window and check the Ignore permissions on this volume checkbox at the bottom of the window. Copy your files to the device. Log into the new account. Verify the external drive is still configured to ignore permissions (reset it, if not.) Copy the files from the external device into the Home folder of the new account. I would create a temporary folder for these files. If you still end up without the proper permissions you will need to make modifications that are easier done if all the files are in a single folder.

  • Hello, I've got an Adobe Creative suite 5.5 Design Standard. It was on an old computer and it's now on a new one and the licence is not accepted !! I have cancelled the licence on the old one. somebody to help me ?

    Hello,
    My licence doesn't want to work on my new computer, even if I have cancelled it on my old computer !!
    Someone can help me ?

    Yes, I've migrated everything from the old to the new computer.
    We have Windows 7.
    Envoy? de mon iPad
    Le 25 sept. 2014 ? 19:12, "Jeff A Wright" <[email protected]<mailto:[email protected]>> a ?crit :
    Hello, I've got an Adobe Creative suite 5.5 Design Standard. It was on an old computer and it's now on a new one and the licence is not accepted !! I have cancelled the licence on the old one. somebody to help me ?
    created by Jeff A Wright<https://forums.adobe.com/people/JeffAWright> in Downloading, Installing, Setting Up - View the full discussion<https://forums.adobe.com/message/6763565#6763565>

  • Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this,

    Used Migration Assistant to successfully transfer PC files to Mini. However file creation or modified date does not transfer. Date of creation is listed as day of transfer.  I would gratefully appreciate any help in solving this?

    I have the same problem; used Migration Assistant to transfer all my pix from PC to MacbookPro, however dates of pix were not transferred. Date created as the date of transfer. Cannot sort my pix according to date.
    Anybody has an answer?

  • When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased music not on this iphone" it tells me "All of your a

    When I purchase music through iTunes from my MacBook Pro, my iPhone 4 iTunes app cannot detect those purchase to allow them to download to my phone. If I open up the iTunes app and select "purchased > music > not on this iphone" it tells me "All of your available music has been downloaded to this device." However, my purchases are not yet downloaded to the iphone and not available to download. If I go to "purchased > music > all > recent purchases" it will show me the purchases that were most recent the last time I synced my phone, but not the purchases since then.
    Any thoughts on how I can remedy this and make all of my purchased music available on my phone without requiring syncing?
    iPhone 4

    So I have been searching the iStore for Airplay and I find lots of information about what it is, but nothing about how much it costs, how/where to buy it, etc.?
    Fortunately, AirPlay does not cost anything as it is a streaming protocol used by Apple. Currently, the AirPort Express and Apple TV are AirPlay-ready. A number of other companies, like JBL, iHome, Denon and Klipsch are also rumored to be working on AirPlay versions of their products.
    Your other option would be to get an AirPort Express and connect it to your Onkyo analog or optical digital audio input and stream from iTunes that way. I currently do this with my 10+ year old Harmon Kardon HT receiver.

  • Can I stream content from my macbook pro to my apple tv3 using a cable?, I don't want to use wifi.

    Hi
    Can I stream content from my macbook pro to my Apple tv3 using a cable connection?, I dont want to use wifi
    Regards

    fireguy999 wrote:
    You have answered my question, thank you so much, I've just plugged in and found out that a direct connection will actually work via ethernet, but it works as Airplay mirroring and itune home sharing
    No you don't need to use AirPlay from the computer to AppleTV.
    Just use the AppleTV as you would with wifi. Everything is controlled from the AppleTV.

  • My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for 10 secs. I just cannot work out what else to do?

    My time capsule was working and then I added another Macbook pro. TC stopped appearing in Airport Utilities. I have tried resetting TC, I have turned if off and held reset button with pen for >10 secs. I just cannot work out what else to do? I have turned router off and on. Amber light is flashing.

    The ethernet says self assigned IP 169.254.67.6
    Then the ethernet is not getting an IP from the TC.. there is no connection.
    I am not sure where you mean when you say the green LED should be on. Do you mean the TC?
    Thanks
    In order to help troubleshoot ethernet connections all routers use connectivity leds.. even APPLE.. it has one big LED on the front.. and 4 tiny leds beside each ethernet port. That light has to come on for ethernet to be active.. if you plug an ethernet cable into the port and the light doesn't come on.. then there is no connection.. either the other end isn't plugged in.. or the cable is bad.. or the ethernet port is bad.. something is wrong.
    To get access to the TC you need this led to be green.. is it?
    If it is green and the WAN is also green.. then I want you to unplug the WAN connection.. the blue wire in the picture.. the port slightly separated from the 3 LAN port.. computer plugged just into LAN port.. no airport turned on.. and press the reset again for 10sec until front led flashes rapidly.. then try and bring up the airport utility again.. assuming the ethernet led is green.
    How old and what model is the TC?
    The A number from the rubber mat will tell us the model.

  • How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    How do I use AirPort Extreme to be able print from my MacBook Pro AND a PC. If I connect printer into AirPort, I can only print on laptop. If printer is connected to PC hard drive, I can only print on desk top. How do I configure this to make both print?

    If you have not already done so, your chances will really improve if you....
    1) Connect the printer to the USB port on the AirPort Extreme
    2) Download and install Bonjour Print Services for Windows on the PC

  • Can I stream content from my Macbook Pro to HDTV using Apple TV

    Can I stream content from my Macbook Pro to HDTV using Apple TV?

    If the content is in iTunes and in a compatible format then yes you can

  • HT3231 i have used migrate assist to transfer wirelessly from my PC to my new iMac but i cannot find my documents on my iMac, first time iMac user, what have i done wrongG

    I used Migration Assistant to transfer all my documents from my PC to my new iMac but i cannot find them on my iMac.  I am a first time iMac user.  What am i doing wrong or where to find them?
    thanks
    marlene

    They're in a new user account created by the Migration.  When you next log on, you should get a prompt to assign a password for the new account.

  • My 5th gen. ipod died and they replaced it with a new one, but I'm having problems getting the music. An error message says that its not authorized on this computer. The ipod is synced but it wont let me add what music I want.

    My 5th gen ipod died and apple replaced it with a new one. I synced it up to the itunes that I already have on my computer but an error message keeps coming up telling me that its not authorized on this computer. What do I do?

    About iTunes Store authorization and deauthorization
    iPod: Troubleshooting songs and audiobooks that won't play
    iPod does not play content purchased from the iTunes Store

  • HT4889 Can I use Migration Assistant to update iTunes (only) from my optical drive Mount Lion computer to my Maverick OS computer?

    Already migrated my data, settings, etc. to the new Maverick OS iMac. Then realized I had lots of CDs that I hadn't burned into iTunes, which I can do only on my old Mountain Lion iMac. Can I just choose "Data" if I invoke Migration Assistant? Will it move only the new stuff, which would be the new iTune playlist library? Don't want to reload the entire computer again!

    What you should be able to do is simply copy everything that's in the home folder under iTunes from the old computer to the same spot on the new one - just drag and drop. That should bring over all your music & your playlists. You shouldn't have to use Migration Assistant for that.
    I did that during one of my many moves from one computer to another, but I have not tried recently. It won't hurt to give it a try.
    ~Lyssa

  • Use migration assistant to move Logic 8 from SL to ML or fresh install?

    I've got the first Intel MBP, and I've upgraded to a new mac mini. The old MBP has LP 802. Should I use Migration Assistant to transfer my Application folder to the new machine or install Rosetta and do a fresh install?
    Any advice would be appreciated.
    Thanks,
    Scorpii

    Scorpii wrote:
    The community members have different approaches, but one consensus is that installing Rosetta from the SL instal disc and then trying to install LP 8 works
    Rosetta is an unnatural addition to Lion or Mt. Lion and installing it can have serious consequences not initially anticipated later on; see this thread (start with the OP's first post):
    https://discussions.apple.com/message/21335549#21335549
    On the other hand, installing from Terminal does not have any "side-effects" so long as the user knows how to use Terminal, such as you do.
    If you decide to install Rosetta, you do so at your own risk!
    I do not understand your reference to "LP 802"
    As to Migration Assistant, what OS X flavor is installed on your first Intel MBP and on your new mac Mini (which you reference to ML, so I assume it is Mt. Lion but please confirm)?

  • Migration Assistant can't find External HD on MacBook Pro Mid-2012

    Hi, I have a MacBook Pro Mid-2012 running OS X Mountain Lion 10.8.2 and I am trying to use Migration Assistant to transfer Time Machine backups that are on my external hard drive, that I backed up from my old MacBook Mid-2010. The problem I am having is that Migration Assistant can't find my external hard drive. My MacBook Pro can find it when I plug it in (I see it in Finder), but Migration Assistant can't. Can anyone help or should I go to the Apple Store?  I need help with this problem as soon as possible.
    Thanks in advance,
    - Daniel 

    Since no one replied I figured out how to do it myself.
    1.) First I plugged in my external hard drive with my Time Machine backups on them, then I opened Finder and click on my external hard drive under devices.
    2.) Next I clicked on and opened the folder named "Backups.backupdb"
    3.) Once inside that folder I could see folders with the backups from Time Machine and all of the folders names were the date I backed up that backup. I clicked and opended the lastest backup folder.
    4.) Inside that folder, I clicked and opened the folder named "Macintosh HD"
    5.) Inside that folder, I clicked and opended the folder named "Users"
    6.) Inside that folder, I clicked and opended the folder named "Daniel" which was my Username on my previous Mac.
    7.) Finally I could see and access all my folders from my Time Machine backups from my previous Mac.
    Keep in mind this is only helpful if you are trying to access old backups (backed up from another Mac) on a new or different Mac. (Sorry for the blurry images)
    Hope this somehow helps someone else,
    - Daniel 

Maybe you are looking for

  • FI tables related to  profit center

    Dear Expert I want to know FI Tables which has profit centers related  G/L accounts of Assets and Liablities . Thanks VG.

  • Bar Chart - Pie Chart custmization

    Hi, I have a criteria ready to display "Sales by Region", using this I have developed a bar chart and a pie chart. My question is, if I customize a color for region (Using Format Chart Data) in bar chart with specific color, the same should be picked

  • Changing Folder/File Permission Parameter

    Good morning. I am trying to change some setting in a VIDEO_TS folder, but all of the files are "Read Only". Even When I go to "Get Info" there doesn't seem to be a way to change permission. What am I missing? How can I change the permission paramete

  • Webservies in Ebiz

    Hi i have a quick question, is there a way in ebiz that i can host Web Services.. or deploy web services.. both 11.5.9 and 11.5.10 thanks

  • Upgradation of Volume license of Windows 8 Pro to Windows 8.1

    Hello, My organization purchased a Volume license of Windows 8 Pro. Windows Prompts for Upgrade to Windows 8.1 but when clicked on it. Windows Store gets open and nothing happens. I gone through some of the Microsoft link and found that Volume licens