I have Verizon FiOS service for phone, internet and TV but I only have one TV hooked up for it for just basic cable service with no DVR and no need for widgets.  Can I use an Airport Extreme as my router and not use the FiOs router?

I want to use an Airport Extreme as my router.  I currently have a Verizon FiOS router.  I have Verizon for phone, internet and TV.  However, TV-wise, I just have a basic service for one TV with just a regular box.  No HD, no DVR.  Don't need access to a menu, widgets, on-demand.  Can I eliminate the FiOS Router and just use the Airport Extreme and still have phone and internet?

I know that it will increase my wireless coverage in my house but will it increase the speeds?
Not sure what you are asking here.  The AirPort Extreme is only going to be as fast as the Internet connection that it receives.....which is 75/75. It cannot take a 75/75 connection and make it go any faster.
If you locate the AirPort Extreme in an area where you need more wireless signal coverage, the AirPort Extreme would deliver 75/75 in that area.  But, keep in mind that the AirPort Extreme must connect to the FIOS router using a permanent, wired Ethernet cable connection.
If you are asking if the AirPort Extreme can wirelessly connect to the FIOS modem router, and extend the FIOS wireless network, the AirPort Extreme would not be compatible with a FIOS product for that purpose.

Similar Messages

  • I enabled the guest network feature on my time capsule.  Can I configure my airport extremes guest network feature if I use this as a network extender using a "roaming" network?

    I enabled the guest network feature on my TC.  Can I configure my airport extremes guest network feature if I use the extreme as a network extender connecting my Airport Extreme to my TC via ethernet cable?

    Unfortunately no, since the AirPort Extreme should be configured in Bridge Mode if it is connecting to the Time Capsule using an Ethernet connection.
    The Guest Network option cannot be enabled when the AirPort is configured in Bridge Mode.
    Another way of saying the same thing is that the Guest Network cannot be "extended" either by using an Ethernet connection or wireless. It is only available from the Time Capsule "main" wireless router on your network, not any extending devices.

  • When using an airport extreme to extend a wireless modern, will the lan ports work?

    When using an airport extreme to extend a wireless modern, will the lAN ports work?

    The AirPort Extreme can extend the wireless signal from another Apple wireless router. When it does, the Ethernet ports on the extending AirPort router are enabled.
    Apple's "extend" feature appears to be a proprietary Apple function, so it would be extremely unlikely that an AirPort Extreme...or any other Apple router....could extend a 3rd party router product wirelessly....if that is really what you are asking here.

  • HT1535 The reference article in question says "Manually manage music and videos" but I only have the option to "Manually manage videos" via the iPad on iTunes.  How do I actually manage music?

    The reference article in question says "Manually manage music and videos" but I only have the option to "Manually manage videos" via the iPad on iTunes.  How do I actually manage music?
    Edit: classic Apple.

    If you post from a a question from the bottom of an article's page then you should get its reference, e.g. HT1535 in your case, on the post's title. The ability to edit you post only lasts for 15 minutes and allows you to correct/add extra info.
    I get the 'manually manage music and videos' tockbox as described on that article. If you only 'videos' then are you using iTunes Match on your iPad ? I don't use it but I've seen posts that say having it enabled on a device can affect the syncing of music.

  • Airport Extreme in extender mode does not reconnect after main router reset.

    I have an Airport Extreme 4th Gen (extender). set to extend the signal from an Airport Extreme 5th Gen (main).  Whenever the main router resets (after reconfig, etc) the extender does not reconnect.  I would have to restart the extender before it will connect again to the network.  However, my Airport Express set to extend will automatically reconnect.  Is this a settings issue?  Please advise. 

    Ok, well I am hoping you are not doing a re-config of your 5'th gen all the time? This should only be done very rarely... we're talking like less than once a year for many people.  Unless there's something else going on there, I wouldn't worry about it if you have to power-cycle the 4'th gen once in a few blue moons.

  • How can I use my airport extreme to connect a windows machine to the internet? I don't have the software disks anymore...

    I no longer have any disks for my airport extreme (its pre-time capsule)... how can I connect my windows machine to it in order to get to the internet?

    You can directly download the AirPort Utility for Windows from Apple Support here.
    Once the AirPort Extreme is properly configured for Internet access you can connect your PC to the Extreme either by a wired or wireless connection.

  • Can I use an Airport Extreme as a modem and wireless router?

    I realize this shows my ignorance, but I am wondering if I need to lease my isp's (Comcast) modem or if I can use and Airport Extreme instead.  Thanks for your help.

    AirPort Extreme is a router only.....no modem on board.....so you will need a modem to work with the AirPort Extreme if you want to be able to access the Internet.

  • Why is my iCloud backup for photos 3.3 Gbs but I only have 12 photos in my camera roll?

    After purchasing my iPhone 4S I performed a restore from backup that I had from my iPhone 4 (running iOS 4.3.5). Prior to doing this restore, I did not realize that my photos were not being synchronized from my iOS device and saved in that backup. So, the hundreds of photos I had on my iPhone 4 were lost in the transfer to my 4S; but then I noticed something odd. Upon closer inspection of my iCloud backup, my storage usage says my camera roll is taking up 3.3 Gbs of my backup! When I did the backup, I had only taken about 12 pictures on my 4S, there was absolutely no way those photos were taking up 3.3 Gbs of space. I was hoping that after synchronizing with iCloud that I would see all my old photos slowly pour in from the Photo Stream; but to no avail.
    Is it possible that my iPhone 4 photos were in fact carried with that restore from backup, but are not showing up in my camera roll? If so, how do I retrieve my photos? So many lost memories!

    That's odd. I can't imagine what else would take up so much space.
    Have you any other Apps that have downloaded data
    ..  appdata and settings of apps, "preferences", saved games "levels reached" , and downlaoded stuff that are stored within an app ", for example videodownloading app that has stored content in the iOS are uploaded ..
    Apps themself /Books/Music/etc are not uploaded to your personal cloud, they are held back by Apple in the store for future re-downloading options. So this can't also be the culprit.

  • My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. Any suggestions?

    My airport extreme (generation 5) was set up using wifi and has worked flawlessly (on macbook pro 2 iphones and window 7 HP pc)until recently. I have reset to factory defaults over and over but still cannot get on the internet. However I can then take my DSL cord and insert it in a different Ethernet port other than the WAN port and I can get internet on my Mac and iphones but only wifi on my husband's PC.  I hate to spend another $179 if this is just something I'm doing wrong. Please help

    I'm having a bit of trouble confirming that the ZyXEL is a combination modem & wireless-N router. If it is, then you really won't get any advantages of using the 802.11g AirPort.
    If the range of your ZyXEL is limited, you may find that doing either or both of the following will help: 1) Move the ZyXEL so that it is higher vs. lower in the room, that is away from any closed areas or placed in a metal cabinet, and 2) Changing radio channels. The latter is especially important in you live in an area where there are a number of competing Wi-Fi.
    A good utility to find out, is iStumbler. You would use this to find these other Wi-Fi and find which have the strongest signal value. Those that do, you would also want to note which channel they are operating on, and then, change yours to one that is at least 3-5 channels away. So, for example, if you find strong ones on channels 1 & 6, change yours to 11.

  • How can I use an airport extreme to extend my wireless network?

    I have a Verizon FIOs router with both wireless and ethernet capability. I also have an airport extreme base station, which is currently connected to the Verizon router by Ethernet and provides wireless to a MacBook in a distant room upstairs. Practically, I have two wireless network now. I have two G4 Sawtooth, which do not have wireless PCI card and require ethernet connection for internet. One of them is in the upstairs study room and connected to the Verizon wireless router by Ethernet. The other is in an downstairs room has not wireless connection.
    Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network? If so, how do I set up the airport station downstairst? If not, I know that I have get a PCI wifi for the Sawtooth downstairs.
    Your advice is greatly appreciated.
    Robert

    Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
    Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
    What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

  • TS2756 How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )

    How can i create a new usb connection (service)  on my iMac for sharing internet from my iPhone5 ( i seem have to deleted it )
    i know its not a problem whit my carrier o data plan or sharing preferences on the ipone because when i use it un my laptop it works perfectly through
    the usb and even works on the Imac through wifi and bluethood tethering but NOT through usb!!.
    the problem is that trying to make it work i deleted the "profile" usb iphone on the network prefereces panel. Now i only have 3 options: ethernet / wifi / bluetooth
    but not the usb iPhone i used to have.
    And when i try to add a new one i dont get a USB option.
    can some one help me please??
    this is how it looks (after the bluetooth PAN i used to have USB iPhone option)

    The question would be more appropriate in the Mac forums as it is not really related to the iPhone.

  • Can I use an airport extreme to extend the range of my wireless modem

    Can I use an Airport Extreme to extend the range of my wireless modem?
    At one end of my house I have a dual band wireless ADSL modem which provides my internet connection and I want to extend (improve) the wireless coverage to the other of the hosue where my Apple TV (2nd gen) is located. I have being trying to extend my wireless network with an Airport Extreme but so far without success. I can get the Airport to join the wireless network, but I suspect that it is only acting as another client and not actually extending the wireless range. There is a setting in the Airport configuration to "extend and existing network", however when I choose this option the Airport no longer connects to my existing wireless network and I am beginning to suspect that this fuction only works with another Apple device (Airport Extreme or Express).
    Has anyone been able to extend the range of a third party wireless router / modem with an AirPort Extreme? If so, any advice that you can offer wold be appreciated.
    Regards
    Michael

    Thanks Tesserax,
    Your answer has confirmed my suspicions.
    Option 1 from your suggested solutions is not a goer because the modem and Airport Extreme are in different parts of the house making it impractical to run a cable between the two devices. 
    I did try option 2 and bought a Netgear range extender, which according to Netgear it would work with my D-Link modem - not.
    However I have managed to work around the problem (sort of) by using the Airport Extreme to create a wireless network between my iMac 27 and my Apple TV. The idea is that the iMac will act as a router between ethernet connected ADSL modem and the wirelessly connected Apple TV.
    The good news is that I am now able to play the content from my iTunes library on my Apple TV without interruptions due to a poor wireless connection . Although the connection from the Apple TV to the internet is not working I think this is most likely just a configuration issue and for me it is not really a show stopper.

  • HT4145 How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? I get a message saying it cannot be extended. Thank you. Arup

    How can I use an Airport Extreme to act as a Range Extender for an Alcatel One Touch Y800Z WiFi modem/router? As we live in a rural area and our landline broadband speeds are awful, I have moved on to a 3G provider in the UK (EE/Orange) and set up the wireless modem which is working very well with an iMac. I have an Airport Extreme base station which was previously connected with an Ethernet cable to the landline router, and two Airport Express stations as Range Extenders. I would now like to use the Airport Extreme and the two Express stations to extend the range of the Alcatel WiFi device. I have tried automatic and manual set up with the Airport Utility but at the crucial step for selecting a network to extend, although the WiFi device is recognised, I get a message saying it cannot be extended.
    Thank you for any help you can provide.
    Arup

    This is a problem with a lot of cheap end wifi hotspot like devices.. sometimes you can just swap the sim out to a real 3G wireless router.. that is a better approach IMHO than wireless repeater ever will be.
    In the meantime..
    Have a go with the suggestion.. place the express as wireless bridge. With a computer connected to the wifi from alcatel unit.. (I am amazed Alcatel still are in domestic market.. I thought they sold out). Set the express to join the wifi.. you do this in the airport utility.. old one is easy.. but in v6 you have to trust to luck so to speak and hope the auto setup works.. tell us if you have trouble.
    With the Express bridging.. you can then plug it by ethernet into the TC.. which will be in router bridge..
    ie
    You can then run the connection from wireless or ethernet on the TC.. and it will relay back to the alcatel for internet.. all a bit dodgy but who knows.. it may give you what you need.
    Wireless repeater is never particularly reliable in my experience. I would avoid it if possible.

  • Can I use the Time Capsule strictly for system backup and continue to use my Airport Extreme for all my wireless needs

    I want to use the Apple Time Capsule as an external drive and continue to use my Airport Extreme for all my wireless needs. Can I do that? The reason I ask is that my Time Machine utility cannot find the TIme Capsule - it only shows me the Airport Extreme, even when I "Rescan". SO I am unable to use the Time Capsule.

    You will need to connect an Ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN "O" port on the Time Capsule.
    Perform a "hard reset" on the Time Capsule by holding in the reset button for 9-10 seconds, then give it another minute to restart to a slow, blinking amber light.
    Open AirPort Utility, select the Time Capsule, and click Manual Setup
    Click the Time Capsule tab located below the row of icons to assign a name to the Time Capsule, a device password, and adjust Time Zone settings.
    Next, click the Wireless tab located to the right of the Time Capsule tab
    Change the setting for Wireless Mode to Off
    Click the Internet icon, then click the Internet Connection tab
    Connect Using = Ethernet
    Connection Sharing = Off (Bridge Mode)
    Click Update at the lower right to save the settings and allow 30 seconds for the Time Capsule to restart to a green light.
    You are all set

  • I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

    I have changed my account to SIM only and when I put my new SIM Card into my iPhone 4 it just says 'no service' in the top left corner, also iMessage has stopped working too. I can only use my phone on my WiFi at the moment, does anyone have any idea?

    I already have, I contacted Orange yesterday and they said I will receive a text to confirm the registrastion for my new SIM Card, they said the text would arrive between 2 and 24 hours and its been over 24 hours with no text recieved

Maybe you are looking for