I have windows 7 and vista laptops on win 7 after the latest updates I was no longer able to browse the net. I have router conection but it shows no internet

since the last update to 14.0.1 and updating plugins for adobe shockwave flash my internet connection dropped out. I have two other laptops, an Ipod touch and samsung phone on the same router and all work fine. I have connection to the router but diagnosis shows no internet access. I updated the same plugin on my Vista laptop and found the same problem occurred. I have reset all network settings and the router back to factory and setup again but still the same

Hi mysticpjd,
this really does not seem to be an Internet browser issue. Have you tried a different browser (Internet Explorer)? I assume that the problem persists there right?
Regards,
jm

Similar Messages

After installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

after installing an update I am no longer able to hear sound out of my speakers. A red light comes on where the headphone jack is. I have already attempted to trip to switch with a wooden toothpick in the headphone jack but have not had luck.

Have you gone into system prefs nad made sure that the headphone port is set to audio out. And not audio in.
Also make sure that you are selecting built in speakers for your audio output.
If that does not fix it try doing a Pram reset.
Shut your mac down.
Press the startup button.
Hold down the following keys. Command Option P and R. Wait till you hear the chime 2 times. Then let go. See if that fixes it.

Existing piece won't run video files on windows 7 and vista

hi, folks - I need some help.
we have a series of older (2003) authorware pieces that use .mpg and .mov files. We run the lessons (exams, actually) at 10 or so sites across the country, twice a year. They've been running fine for 7 years with occasional updates and tinkering. At the sitting last week we had problems with a lab that just converted to Windows 7 and another laptop that runs Vista Business. In both cases the authorware file loads and runs until a screen that tries to load a video file. The placeholder shows up (a square with an x across it indicating its size), but the piece freezes and nothing runs. The piece runs fine on all the other sites and on a variety of pc's at our location.
In both cases, we are able to load and run the video files directly from the hard drive through Media Players, but they will not load in authorware.
I've tried recompressing the files into .wmv, mp4, mov, and avi. Still won't run. Tried recompressing on a different machine and still no joy.
would really appreciate any ideas or help on this.
thanks,
Ron

thanks, Steve and Eric. Replaced it and it's running fine - appreciate the response and advice.
Regards,
Ron

Fingerprint Software 5.8 for Windows XP and Vista (32-bit)

Fingerprint Software 5.8 for Windows XP and Vista (32-bit) points to:.
Version: 5.6.2.3650 Release Date: 2007/09/27 which is OLD!!!!
we ar stiil waiting for new driver? package? .. have lot's of customer which acan not help! to fix their machines?
If you have a woman with smal hands/wingers .. there is no way to make it WORK!!!
When will we see new turbo memory drivers?? Have more than 50 customer/notebooks wit turbo memory diabeld. as it not usable, but they have paid for a product!!!!
Come ON !!
Message Edited by TeMpL on 07-09-2008 07:29 PM

Hi there!
Please see this thread for the download links for the Fingerprint Software 5.8 ....
This issue was already raised in the ThinkVantage subforum here at Lenovo Forums and it is resolved.
Regarding the Turbo Memory, please keep in mind that the hardware only works with Vista. Windows XP does not support turbo memory thus the piece of hardware is rendered useless. With regards to Turbo Memory usage in Vista, the latest drivers do fully support the card in Vista and since there are no technological changes, there is no need for additional or new drivers.
Hope this helps!
Steve
Message Edited by icantux on 07-09-2008 02:28 PM

Writing file with windows 7 and vista os..

hi,
since i am using Windows XP operating system with Labview, i made a executable file and i trying to install with Windows 7 or Vista OS installed PC.
when my device is detect it will gives the hardware information , that have to save in to the hard disk, where i am usually putting near to my Application
program exe file. using XP will not be any problem its creates and writes the information file.
for the Vista and windows 7 OS has a adminstrative writes it wont allow to create and write a new file where near to application exe file.
is there any method has to set these file for administrative rights on Windows 7 and vista OS?
i am using Labview 8.6 version
Regards,
Balaji DP

You would need to log into the computer with an account that has administrative rights. Or, you could configure the application to run under the administrator account. Both of these are Windows operations.
Or, you could fix your code so it doesn't do that.

6.18 does not work on Windows XP and Vista

6.18 doesn' t work at all on Windows XP
On Windows Vista my webcam doesn't work!!!
And now Skype tells me I can't use it unless I upgrade to the latest version?
What kind of crap is this?

odonov8 wrote:
I confirmed when I rolled back to version 6.13 on Windows Vista the webcam started working again.
And forget it - nothing after version 6 can even run on Windows XP.
I spent like 3-4 hours trying to debug this issue. Even got an online webcam tester to demonstrate and prove my webcam works.
How could you Skype people say "Please make sure you are using the latest version (currently 6.1 of Skype for Windows before reporting an issue."??? You haven't even made sure that your latest version even WORKS on the OSs you claim it works on... and to add insult to injury your website doesn't even have older versions just in case there's a problem. We have to rely on good samaritans in the community to archive previous versions that work...
If you are going to advertise that your software works on previous OSs you should test them before forcing us to upgrade.
ruwin I would appreciate a response.
Please, run the DirectX diagnostics tool (both on Windows XP and Vista).
Go to Windows Start and in the Run box type dxdiag.exe and press the OK button. This will start the DirectX diagnostics program. Run this diagnostics and save the results to a file. Please, attach this file to your post.
Be aware that you will have to zip this file before attaching it here.

CC on Windows desktop and Mac laptop?

Can I install CC on both a Windows desktop and Mac laptop and share files?

Yes to the install... don't know about sharing files since I don't have a Mac
Cloud License allows 2 activations http://www.adobe.com/legal/licenses-terms.html
-Install on a 2nd computer http://forums.adobe.com/thread/1452292?tstart=0
-Windows or Mac does not matter... 2 on the same operating system, or 1 on each

Which format for External HD using Mac OSX Windows Xp, and Vista?

Hi
I've had problems with using an extermal HD and am looking for some further information...
I have recently purchased a 500 g external iomega hard drive. I need it to be compatible with my mac using osx, and with pc's using both Windows XP and vista. I will routinely be needing to transfer files from all three platforms.
I had reformatted my hard drive to FAT32 on the pc using windows xp and it worked fine, then took it home and used in on my mac, and it is now no longer recognized on the pc.
The HD is under disk manager is showing that it is formatted as FAT32 but I cannot use the drive. I cannot download programs to use on the PC's to make the drive compatible but could on the mac.
What are my best options to share files reliably?
Thanks

Add NTFS write support to Mac OS instead.
MacFUSE +3G is a good start.

Can i use one license of creative cloud on windows workstation and mac laptop?

Can i use one license of creative cloud on windows workstation and mac laptop?

Yes.
http://www.adobe.com/au/products/creativecloud/faq.html
"Are there any unique benefits that come with my paid membership?
Access to both the Mac OS and Windows® versions of the desktop applications and the ability to install them on your primary computer and one backup computer. So, if you have a Mac at home and a PC at work, you can install your applications on both as long as they are not running at the same time. See the product license agreements page for more information."

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks fo

I have been trying to share file between my Mac Book Air and PC Laptop.Sometimes my Mac sees the PC and tries to connect but every time the connection fails. It says server may not exisit or network problem. I have apparently no network problem. Thanks for any help you may provide

hi,
somewhere on the windows machineshould be something like "network setup wizard". exactly where it is and what it is called i cannot remember off the top of my head, windows help is actually slightly useful here, it should have a link to it.
all the options checked on the mac are only what services the mac is offering to other machines, they have nothing to do with the services it can access (mostly...).
oh yeah, to actually connect to the pc after you have turned its sharing on, use the finder, or, when it does not show the pc (this happens on and off, possibly a refresh problem apple...) choose go --> connect to server and enter smb://<pc's name or ip>
to find the ip, the easiest way i think is
start --> run --> cmd ->> ipconfig
Andrew
Message was edited by: Andrew Dicker

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas

I have a new Dell computer running windows 7 and am unable to download itunes. The message I recieve after trying to run the download is: This installation package could not be opened. Verify that the package exists and that you can access it. Any ideas?

Hello tcampbell1549,
Thank you for using Apple Support Communities.
For more information, take a look at:
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Have a nice day,
Mario

HT203175 I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggesti

I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?

In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device

I have iCloud set up fine on Windows 8 and it pulls shared photo streaming great, The problem is that in My Photo Stream folder the photos doesn't charge automatically and is empty, how can I do?

I have iCloud set up fine on Windows 8 and it pulls shared photo streaming great, The problem is that in My Photo Stream folder the photos doesn't charge automatically and is empty, how can I do?

Hey appleIC!
Here is an article that will help you troubleshoot this issue:
iCloud: My Photo Stream troubleshooting
http://support.apple.com/kb/ts3989
Take care, and thanks for visiting the Apple Support Communities.
Cheers,
Braden

IPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?

iPad running iOS 5 has on the menu bar only have 4 icons, being: back, forward, bookmarks, and the "add to bookmarks", but is missing an icon after the "add to bookmarks" arrow, that is a "show all open browser windows" icon. How do I get it in my safari?

What you are seeing is how Safari works now in iOS 5. There is no way to get that icon in Safari now. There other much better browsers available in the App Store. Look at iCab Mobile, Mercury, Atomic, ....
I have been running iOS 5x for so long now, that I don't even remember if that icon did appear in earlier iOS versions

Using Windows 7 and LR 5 when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showi

Using Windows 7 and LR 5, when I look at the Keyword List a certain keyword has 7 pictures but when I check the Library Filter with that keyword 350 pictures are shown which includes the 7 pictures that have the keyword. Why does the Library Filter showing pictures that do not match the query

Dan,
Here's what's going on in the catalog you sent me, "Joel & Caitlin's Wedding". There is the keyword "gwenn", which is explicitly assigned to 7 pics. But keyword "schwartz" has a number of synonyms, including "gwenn", and it is assigned to 25 pics. There is no overlap between the two sets of pics.
I discovered these two occurrences by doing Metadata > Export Keywords, opening the exported file in an editor, and then searching for "gwenn". I found two occurrences of "gwenn":
gwenn
schwartz
{gwenn}
From this, you can see that the keyword "schwartz" has 9 synonyms, of which "gwenn" is one.
The filter criterion "Keywords Contain gwenn" will match the 7 pics that are explicitly assigned the keyword "gwenn", and it will also match the 25 pics assigned the keyword "schwartz", because that keyword has a synonym "gwenn".
This illustrates the behavior I mentioned above: The criterion "Keywords contains x" will match against any of a pic's assigned keywords, any of those keywords' ancestor keywords, and any of the synonyms of the assigned keywords and their ancestors.
So LR is operating correctly here, if not in a way that's easy to understand.
It appears that you are using the synonyms of "schwartz" to represent individual members of the Schwartz family. A better way of representing family relationships is to have a parent keyword "Schwartz", with subkeywords for each family member, e.g. "Gwenn Schwartz", "Joe Schwartz", "Jane Schwartz", etc. Repeating the family name in the subkeywords has a couple of advantages. LR usually only displays the "leaf" name of a keyword, so instead of showing you just "Joe", it will show you "Joe Schwartz", helpful when there are a number of different people whose first name is "Joe". Also, if you ever export your pics to other software, it may not understand the LR hierarchy and won't show the parent keywords, so again it's more informative to see a keyword named "Joe Schwartz" rather than "Joe".

I have windows 7 and vista laptops on win 7 after the latest updates I was no longer able to browse the net. I have router conection but it shows no internet

Similar Messages

Maybe you are looking for