I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error. Is this an issue with the bootcamp driver not compatible with Windows 8.1? or is there something I can do to fix this.
I also keep getting WHEA-Logger Event-ID 19 warning events in the Windows Event Logs with the following details.
A corrected hardware error has occurred.
Reported by component: Processor Core
Error Source: Corrected Machine Check
Error Type: Cache Hierarchy Error
Processor APIC ID: 3
The details view of this entry contains further information.

likely win8.1 dont have official bootcamp support yet
1/3 of my logins into win8.1 result in a fatal bluescreen
was the same deal when I installed win8 before official support
and when the drivers with official support was released the issue went away

Similar Messages

Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

I just Installed Yosemite update on MacBook Pro retina late 2013 will not boot flashing folder with ?

dunno, Lynn--maybe Etrecheck. trying running disk utility to verify the status of your hard drive. That may give you a basic idea. Perhaps tech tool pro. As for it running hot, I can't say for sure. try shutting it down and using a vacuum clearner +crevice tool around the back of it. It's been my experience that hard drives usually fail without a lot of warning, luckily you have a backup. Afterwards you can say "Yup, that went bad". I've done a little research and found out that your MacBook Pro doesn't come with a conventional hard drive as such, but an SSD (solid state device) . It's upgradeable (up to 1 TB ) but not cheaply
go here for more info (OWC) :http://eshop.macsales.com. For right now, I'd recommend resetting the SMC/PMU, maybe zapping the pram . to do that, reboot, hold down Apple+Option, P+R keys while rebooting. Hold down for 3 chimes, let go and let it boot. as for the SMC thing....
I'm assuming your battery isn't removeable-shut down computer, plug in MagSafe cable . On built in keyboard, on left side, press Shift-Control-Option and power button at the same time. release all the keys and the power button. press power button again to turn on computer
that is all
John b

VMware Fusion 6 (v 6.0.2), 15" MacBook Pro Retina (late-2013), and Windows 8.1

Does anyone the best recommended settings for the items listed in the subject line? Resolution looks so small. I installed Windows 8.1 Pro on my late-2013 15" MacBook Pro (MBP) via VMware's Fusion 6 (version 6.0.2).
Thanks.

If you used VMware Fusion to install Windows, first make sure you have installed VMware Tools in Windows. Read > http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=display KC&externalId=1003417
Then, you will be able to change the Windows resolution as usual. In Windows, right-click in the desktop and select "Screen resolution". There are other ways to do this > http://windows.microsoft.com/en-us/windows-8/get-best-display-monitor.
There are not best recommended settings because it depends on the hardware of your computer: for example, if you have got 8 GB of RAM, you can assign 4 GB of RAM to the virtual machine (depending on the applications you use), or if you have got a Quad-Core processor with Hyper-Threading, you can assign more processor threads to the virtual machine so you can improve performance.

OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013

OS X Mavericks 10.9.1 can't be installed on MacBook Pro retina late 2013
OS X Mavericks 10.9.1 installer is available in the App Store but it can't be downloaded because "OS X Mavericks can't be installed on this computer".
If the installer of version 10.9 is already in the application folder it can't be updated for the same reason.
I've seen that they are two versions of the updater that are downloadable from apple's website and one is specific for the MacBook Pro retina late 2013.
I suspect that the installer in the App Store is not an universal installer. It is stupid because you can't reinstall that Mac is needed.
I phoned to Apple (AppleCare) and they don't know why this happens.

Hello,
Try to boot the 15" MBPr as target when connected to your MBA (if you have the right cables and adapters).
From the MBA, install on the 15" MBPr's disk, in that order :
The 10.9.1 update for Mavericks except MBPr
Download
and then the 10.9.1 update for Mavericks specific for MBPr
Download
The MBPr should be bootable again. I did it for an external HD.
Hope this helps.
Best,
ÉrIC Miclo

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

MacBook Pro Retina Late 2013 UI Lag after installing Yosemite

Hey everyone,
Ok so my Issue here, and I think I'm not the only one but my MacBook pro retina late 2013 (8GB ram, 256gb SSD) has been experiencing numerous issues after installing Yosemite. For example, the UI lag is at times horrible; after opening several apps, and especially after having a pdf or two open in preview everything becomes so sluggish. the animation of switching to mission control is painstakingly slow, and opening new tabs in safari takes 2 or 3 seconds. I've done a clean install of yosemite but nothing seems to help, what should I do; just revert back to mavericks and cross my finger for a future update?
Any help would be much appreciated, thanks so much !

i am in the same situation as you, late 2013 retina MacBook Pro 15 inch upgraded to yosemite and then clean installed yosemite b/c of UI lag after opening several apps at once... I found that yosemite drained my battery life too, on mavericks i was getting 5-8 hrs of battery life, on yosemite i was getting like 2-3 hrs most.
After exhausting every option out there (apple store genius bar help, apple repair, etc), I came to the consensus that my macbook had no hardware problems at all, it's basically a software problem on apple's end. and until they update yosemite with a specific fix for the UI lag and the battery consumption problems, i am not going back to yosmemite.
what i did was clean installed back to mavericks... this solved every one of my problems, NO LAG, NO BATTERY ISSUES, back to buttery smooth performance, of course without the new UI however... but i can live without new design
this experience tells me several things: 1. the new apple under the leadership of cook is slowly but surely sacrificing quality of software for unnecessary updates(sales) 2. mac hardware is still good but who knows for how much longer

Using Intel graphics in Windows on Macbook Pro Retina Late 2013 ?

I own a Macbook Pro Retina 15" Late 2013 with Nvidia GT750M graphics.
On Windows, the power consumption and heat production is noticeable higher than on OSX.
People said this is due the Nvidia GT750M being constantly used, because there is officially no way to switch to the more power saving Intel Graphics on Windows.
I have found a extremely tricky way to switch the graphics, but unfortunately I have no idea how I do this:
http://forums.macrumors.com/showthread.php?t=696523&page=40
Does someone know a easier way to do it or can explain it step-by-step ?
I'd appreciate this very much if I could have a longer battery life on Windows
Thank you.

I own a Macbook Pro Retina 15" Late 2013 with Nvidia GT750M graphics.
On Windows, the power consumption and heat production is noticeable higher than on OSX.
People said this is due the Nvidia GT750M being constantly used, because there is officially no way to switch to the more power saving Intel Graphics on Windows.
I have found a extremely tricky way to switch the graphics, but unfortunately I have no idea how I do this:
http://forums.macrumors.com/showthread.php?t=696523&page=40
Does someone know a easier way to do it or can explain it step-by-step ?
I'd appreciate this very much if I could have a longer battery life on Windows
Thank you.

Question on using bootcamp and windows on 15" macbook pro retina (late 2013)

So i just bought a new macbook pro 15" retina (late 2013) and i want to play games on it like LOL, WOW, and SC2. i was wondering if i really need to play them on bootcamp using windows 7.

Open Boot Camp Assistant (in Utilities) print out the instructions, setup Windows on its own partition, insall and run Windows natively, not much difference than on any laptop.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Forum that is devoted to Windows Boot Camp:
https://discussions.apple.com/community/windows_software/boot_camp

I have Adobe Photoshop 10 installed on my MacBook Pro but cannot get it to type an O with Umlauts as it does on the keyboard outside Photoshop

I have Adbobe Photoshop 10 on my MacBook pro but when using it cannot get an O with Umlauts, which are easily done outside Adobe. I feel sure that it must be possible, but nothing I have tried has succeeded. Can anyone help?

How are you trying to get the Ö? By holding down the O key or by pressing Option-U to get the umlauts and then press the O?
I have a later version of Photoshop and am able to type Ö using the "Option-U + O" method, but not using the "hold down O" method. My guess is this has to do with the type engine inside Photoshop. Adobe apps tend to use a different type engine because it is capable of things the OS type engine cannot do.

Windows 7 on MacBook Pro Retina late 2013. Showing popup window as "Windows detected a hard disk problem"

I have installed Windows 7 64 bit version in my MacBook Pro Retina(13") late 2013 model . It was working fine from last 8 months but recently popup window showing as "Windows detected a hard disk problem" once login. Please check the following image.
I have contacted Apple Support team. They have tested the hard disk while booting from Mac OS and all the reports showing as hard disk is fine. Then I thought might be it was some virus and removed the Bootcamp partition and re-installed Windows 7 Operating System. But once updated Windows 7 with latest updates. This message showing again.
Would you please help me out to fix this issue. Anybody faced similar issue?

No I think that all drive are really on failure
I've boot with an ubuntu livecd and smartmontools see also the failure.
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate     0x001a   200   200   000    Old_age   Always       -       0
5 Reallocated_Sector_Ct   0x0033   100   100   000    Pre-fail Always       -       0
9 Power_On_Hours          0x0032   099   099   000    Old_age   Always       -       1872
12 Power_Cycle_Count       0x0032   099   099   000    Old_age   Always       -       762
169 Unknown_Attribute       0x0013   253   253   010    Pre-fail Always       -       4003597393408
173 Unknown_Attribute       0x0036   100   100   100    Old_age   Always   FAILING_NOW 12124890467160
174 Unknown_Attribute       0x0022   099   099   000    Old_age   Always       -       7469954
175 Program_Fail_Count_Chip 0x0022   099   099   000    Old_age   Always       -       4989854
192 Power-Off_Retract_Count 0x0012   099   099   000    Old_age   Always       -       31
194 Temperature_Celsius     0x0022   064   064   000    Old_age   Always       -       36 (Min/Max 11/75)
197 Current_Pending_Sector 0x0022   100   100   000    Old_age   Always       -       0
199 UDMA_CRC_Error_Count    0x001a   200   199   000    Old_age   Always       -       0
240 Unknown_SSD_Attribute   0x0022   100   100   000    Old_age   Always       -       0
When I use the Mac disk tools from the startup menu, it see also the problem.
Now the big question is : Why I've this type of issue with 2 MBA and 1 Macbook pro 15".
Their configurations are the same : windows 7 with truecrypt.
Maybe Windows drastically reduces the lifetime of the Apple SSD drive.
The 3 Mac are used for less than 6 month !!!!

WD 1TB not recognised on 13" macbook pro retina (late 2013) even though it is exFAT file structure. The same drive is recognised on iMac and an old Dell laptop. I also have a seagate 2TB external hard drive (powered) that is recognised by my macbook pro.

I just bought a late 2013 macbook pro retina 13" a few days ago. I am trying to transfer all my music from my old Dell laptop. I formatted by 1TB Western Digital MyPassport to exFAT to allow read and write on both operating systems. The 1TB WD My Passport is recognised by both my Dell and iMac but not my new macbook pro retina 13 (late 2013). My 1TB WD My Passport is USB 3.0 with USB 2.0 backward compatability. I also just bought a 2TB Seagate Desktop Backup Plus (which is powered) for backing up and extra file storage, THIS WORKS! I don't understand how this works on my macbook pro but my 1TB western digital my passport doesn't. PLEASE HELP!! I have done full formats as well (not quick ones) which take nearly 8 hours. PLEASE HELP

Is there a pattern to the time of day or other detail that may be
traced back to a OS X system cause of this odd phenomenon?
Are there any copies of system files on any of the attached USB
external drives? Any libraries, such as iTunes, iPhoto, etc?
Once the drives are indexed by Spotlight, are their permissions
ignored by the OS X? Content, if neutral, should not affect the
wake or sleep cycle; especially if they're ignored by the OS X.
Could there be a bad cable or other component? If so that would
be a difficult process of elimination to detect it. Usually replacing
most suspect components in the USB stream (external to Macs)
is a rote way to mechanically test that idea; & not 100% sure.
Does the equipment all have a good ground to the utility or house
electrical field? An intermittent ground may affect more than sleep.
Hard to say at this point. Maybe a late-night talk radio guru on
remote viewing could peer into your situation and sleuth it out?
Sorry to have run out of ideas, but the process must be electrical
& mechanical to some extent. - Or perhaps odd software inspired.
Do you have any phone-home spyware items inside, just jumping
at the chance to spill your information? Little Snitch may help.
PS: Perhaps the computer needs to go into Apple & have a genius
or product specialist at AASP test the unit thoroughly... BlueTooth?
see:
https://www.google.com/?gws_rd=ssl#q=Wake+reason:+XHC1
Good luck & happy computing!
edited 2x

Windows 7 x64 ult. update KB2685813 failed on bootcamp 5.1 (MacBook pro retina late 2013)

Hey,
I have a MacBook Pro late 2013 running Windows 7 x64 ultimate with bootcamp 5.1.5640.
Windows failed to update user mode driver framework 1.11 (KB2685813) several times now.
I did even get stuck during instalation after reboot.
I dont want to risk to lose the windows.
What can I do?
Cheers.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

USB ports not working in Windows-7 on MacBook Pro Retina Late 2013 after Bootcamp installation

1) INSTALLATION
Using Bootcamp (v. 5.1.1, OS X Mavericks) in combination with an original Microsoft installation DVD disc using an external optical CD/DVD drive. Note, the installation is NOT from an ISO image. In the Bootcamp setup window only the lower two of the three setup options are clicked, namely a) to download Windows-7 drivers to a USB stick, and b) to partition the harddrive and then to install Windows.
2) PROBLEM
After the initial Windows-7 installation no devices attached to the USB ports can be found under Windows-7. The ports are dead. Also the WLAN did not work, so no internet connection was possible.
3) CAUSE
The problem is caused when you use a USB 3.0 stick as destination for the Bootcamp driver downloads. It seems that Windows-7 cannot recognize the USB 3.0 stick properly during the Bootcamp/Windows installation process, thus failing to do perform a proper installation of the Windows-7 drivers.
4) SOLUTION
Use a USB 2.0 stick and everything will work perfectly.
Follow these steps in order:
1) Connect your external DVD drive to a USB port and insert the Windows installation disc
2) Start the Bootcamp utility
3) In Bootcamp, remove the failed Windows-7 installation and partition
4) In Bootcamp, redo the entire Bootcamp process, but this time using a USB 2.0 stick
5) Follow all further steps in Bootcamp and later in the Windows-7 installation process
6) At the end of the installation procedures you will be asked to confirm the installation of all Bootcamp/Windows drivers.
7) Bootcamp installs all the drivers and your Windows-7 installation will work perfectly.

Ok, where is this Intel driver? There is no such thing "program manager" so I am guessing you mean the Programs and features control panel, but on my machine that whole window is blank after a clean install. I still cannot get the USB ports to activate. Two fresh installs and several different USB sticks later and no luck. Should I just give up and go to Windows 8.1? I really need Windows 7 to work if at all possible. Other devices shows one USB controller without driver software so I suppose that's the culprit. There are other USB devices installed under the USB section of Device Manager, but they apparently have nothing to do with the USB ports themselves, just devices like the trackpad etc. I've spent two hours on this so far and it's getting out of control. Why doesn't this work with generic USB drivers?

MacBook Pro Retina (late 2013) VM and Windows 8

Greetings.
Just got the new rMBP and am exploring VM options for Windows. Have been using Parallels for years on iMac and MacBook (I want VM and not Boot Camp so I don't have to re-boot). Looking at Fusion and would love any feedback on the latest versions of both.
Also, as Windows 8 is only an upgrade version, has anyone figured out how best to get 8 on the new machine?
Thanks for your responses.
nhlevin

Well....THAT was easy. Much ado about nothing. You don't need to find a link to a separate .iso file. Turns out that the 5.0 installer which is part of the install kit will prompt you to create a bootable disk or an .iso image, both to a USB flash or to a file on the internal memory. So here's what I did:
1. Ran .exe file downloaded to older VM (Black MacBook running Windows 7);
2. Executable file then began to download the installation files and then began installation.
3. It was only after the installation began that I was them prompted to make an install disk or an .iso image. I of course chose the latter and saved to a USB drive (though the install disk would also be made on the USB, yet not an .iso file but rather a bootable install disk).
4. I then used the Easy Install option from VMFusion and boy do they mean easy! After some configuration clicks, it made a 60GB partition and installed from the USB drive.
So far, working beautifully.
Thanks for the help!

Having trouble installing Win 8.1 Pro with BootCamp on MacBook Pro Retina late 2013. What's the latest word?

Why is this so difficult? A lot of the directions are outdated by months.

It is not difficult if you read and follow the instructions located here: http://www.apple.com/support/bootcamp/
If you are having specific problems let us know. We can not help you without details.

I have Windows 8.1 installed on my Macbook Pro Retina (Late 2013) and it keeps on crashing with a WHEA_UNCORRECTABLE_ERROR BSOD error

Similar Messages

Maybe you are looking for