I have windows 8.1 The Itunes store will not Open I can Play song and see them but the store is not working

The I tune Store Wont Open ????

Here is the fix for that problem, if you're still having it.  I had the same thing happen.  Sony Singh posted this in another conversation and it worked. Just be sure to reboot after copying and pasting the file below.
Copy QTMovieWin.dll from:  C:\Program Files (x86)\Common Files\Apple\Apple Application Support
to: C:\Program Files (x86)\iTunes

Similar Messages

  • I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS.

    I have 2 purchased ringtones in iTunes that will not load onto my iPhone4 with the new 5.0OS. Is there a fix?

    Message to use a new version of IE
    There is a problem with IE10+ in that it is mistakenly seen as being IE1.  To get around this either use a different browser or use compatibility view (http://windows.microsoft.com/en-us/internet-explorer/use-compatibility-view#ie=ie-10)

  • HT5278 i did this update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though! ne1

    i did the ios5.1.1 update and now the volume on my phone doesn't appear when i push the buttons on the side of the phone. occasionally i see them, but my speakers won't work for playing videos or music either. it does ring when i receive a call though, and for my alarm. ne1 else had these problems?

    I have had this happen to me on 3GS, 4 and 4s.   Usually the solution is one of the following:
    1-  If  your volume indicator says  headphones even though they are not plugged in, then:
    Stick your headphones into the headphone jack and then remove quickly.
    2. If that does not work Power your phone off. Then when restarting Reset the phone by pressing the home button and the power button at the same time until the apple logo appears.
    3. Make sure you have not chosen to send audio to an Airplay device such as Apple Tv.
    Hope one of these works for you

  • HT2204 Itunes password will not work when I purchase items after reseting passwords

    Have used Itunes for years with no incident.  Now, every time I try to purchase a song, book, app...it prompts me for my username and password.  Despite knowing it....it will not work. I've logged out / logged back in several times no luck.  I've updated my password successfully.  But again, each time I try to purchase something, I type in my username / password and it says that it is not correct.  ***.  Have recently even updated Itunes to make sure everything there is up to date.  Is there some virus that could be involved here.  HELP!!

    iOS: Troubleshooting Messages
    FaceTime, Game Center, Messages: Troubleshooting sign in issues
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes      
    - Restore to factory settings/new iOS device.                       
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                                              

  • When I try to connect my iphone to itunes it will not work, but when I connect an ipod it will. This is telling me something is wrong with my phone I am jsut not sure what that is. Can someone help me.

    I was trying to update my music last night. But itunes told me it needed to be updates first. So I updated itunes, and my phone. But now when I connect my phone using the usb. It will not connect to itunes, all that comes up is a phone icon on my desk top(which doesn't allow me to do anything with) But when I connect an ipod it does connect to itune and I am abble to look at how much room is left, and the option to restore ect) . SO this tells me something is wrong with my phone it self. Does anyone know what I can do to fix this problem?
    Thanks.
    PS my lap top is running the new windows 8.

    Hi,
    Start Here:
    http://www.apple.com/support/iphone/assistant/phone/
    And See Here:
    http://www.apple.com/support/iphone/syncing/

  • HT3669 I have an Epsom 1250 photo scanner that will not work with my new iMac.  I get an error report indicating 'scanner ot available' and the indicator light on the scanner goes to red.

    When I try to use the scanner I get error message 'scanner not available' and the scanner indicator goes red .  I have contacted Epsom who advised me to run System update on my Mac several times which I havedone to no avail.  The scanner is in working order as it works satifactorily with my 'Windows' laptop.  The scanner is listed as being included in the driver updates but It would appear that the driver on my iMac supplied  in any update is not suitable.
    I am currently running OSX 10.8.4
    What steps should I now persue to be able to use the scanner?
    Alan.

    Howdy Susiesdad,
    I would suggest the troubleshooting steps from this article named Troubleshooting printer issues in OS X found here http://support.apple.com/kb/ts3147
    Don't let the name throw you off, the troubleshooting is relevant for scanners as well.
    Follow these steps until the issue is addressed:
    Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
    Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
    Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
    Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
    Delete the affected printer, then add the printer again.
    If the issue persists, try these additional steps:
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    All the best,
    Sterling

  • ITunes update  will not work on WIndows 7 PC

    I rec. a message for an iTunes automatic update. There was an error so I clicked try again. Then I got a message to try a manual update except now iTunes will not open. I then uninstalled it and tried to re-install but I get a message that MSVCR80.dll is missing. Went to Microsoft and installed Microsoft Visual C++2005 Service Pack 1 Redistributable Package MFC Security Update which is suppose to reinstall the missing .dll file. Then I tried to reinstall iTunes but I keep getting the MSCVR.dll missing message.
    This is one big runaround!

    Follow the directions of tt2 in https://discussions.apple.com/thread/5822086

  • TS3297 I have purchased two films on iTunes that will not load surfs up and diary of a wimpy kid any ideas on how to contact iTunes to resolve issue

    I have purchased 2 films from iTunes that I can not load any ideas on how to contact iTunes as I have paid for them but have been unable to watch as box comes up with can not load movie on one film and other film screen just keeps reversing back to original screen when you try to play it??? Be grateful for any help please.

    I don't think there will be a solution to this. Exchange 2003 just isn't supported.

  • ITunes, iPhone, will not work on Vista with DEP !!!

    I am having a problem with the latest version of iTunes. If you have Data Execution Prevention (DEP) turned for "all programs and services" iTunes will lock up when you go to click on the iPhone tab in the iTunes preferences. You receive an error that Apple Mobile Device Helper has stopped working. Probably, this a new module added to iTunes for the iPhone and was not tested with DEP. The application wants to access the hardware in some way. When this happens you have to force close iTunes.
    You can turn DEP on just for "essential Windows programs and services only" for an intern solution to the problem. I have not tried but I think we might have to add the apple mobile helper exe to the list of allowed applications in DEP.
    I hope the apple engineers are reading the form and can look into this problem.

    If your iPhone isn't being recognized in iTunes on Windows but is being recognized by your computer (can you see it in My Computer?); rather than remove/reinstall things over and over (which is an 'I hope it fixes itself' approach) just ensure that your iPhone can communicate with iTunes.
    The iTunes installer isn't a very effective piece of software as you're probably noticed.
    There overview of what we're going to do is:
    1) We're going to make sure Apple's Mobile service is installed. By extracting the install file from the main setup file using WinRar.
    2) We're going to make sure that service is started.
    3) We're going to make sure the iPhone is using the right driver to talk to it.
    You'll need to use the Device Manager, Services Manager and install WinRar. If these steps are too complex for you, just ask a friend to do them.
    Start by closing iTunes and pluggin in your iPhone with the power on.
    1) Now Make sure Mobile Service is installed (steps these follow)
    a) Have a copy of the iTunes 7.5 setup file (download it if you don't have it)
    b) Download winRar and install it.
    c) After winRar is installed, right click the iTunes setup file (iTunes75setup) and choose extract to iTunes75Setup\
    d) Go into the newly created iTunes75Setup folder
    e) Double click AppleMobileDeviceSupport (.msi)
    f) Install it
    2) Make sure Apple Mobile Device serve is turned on via Services.
    a) Go to start, run
    b) type in services.msc and click ok
    c) Find Apple Mobile Device, right click and choose start (or restart)
    3) Install the correct driver for the iPhone via Device Manager
    a) Go to start, run
    b) Type in devmgmt.msc and click ok
    c) Expand Imaging devices and right click Apple iPhone
    d) Choose Update Driver
    e) Choose 'No, not this time' radio, click next
    f) Choose 'install from a specific location (advanced)
    g) Choose 'Search for the best...'
    h) Uncheck Search removable media...
    i) Check Include this locaiton in search
    j) in the text box type/paste the below line:
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    If any of the driver update steps are missing or differ on your system but you see the Apple iPhone device, then you can try to change its driver to the driver in the above listed folder using whatever steps yours shows.
    If you're using a foreign Windows then the word 'Program Files' may be something different like 'Programmer' so change it accordingly... You can always click browse instead and manually find the folder.
    k) click next, then after it installs click Finish.
    Now you can open iTunes and it will be able to detect and talk to your phone.

  • ITunes 6 will not work on my Mac

    I have an older G4 and have been running iTunes since I upgraded to OSX about a year and a half ago. Never any problems. Just recently got an iPod from a friend and have been using that with no probs. for about 2 weeks. I was promped to update both iTunes and iPod software and did so like I always have. Now iTunes wont open at all. no error message, nothing. I trashed my old iTunes and re-installed a new one, no good. All of my software is updated. I am running OSX 10.3.9. I have seen many of the same postings but they all seem to be coming from PC users... hope someone can point me in the right direction.
    Thanks!

    Run the Disk Utility application and have it Repair Permisisons on your main hard drive. Reboot and try iTunes again.
    And next time make your post to one of the Mac forums. This is a Windows forum.

  • ITunes Match will not work on new phone...

    OK my 1st iPhone 5 had some serious battery issues so I had it replaced by Apple.  On the same day I took my new phone to Best Buy to have the Zagg screen protector replaced.  Well they flooded that phone with the solution they use for adherring the protectors and they had to replace that phone.  So I set up two iPhones in one day.  Now my new phone gives me an error when I try to set up iTunes Match on it.  It says I need to wait 90 days until I can associate this phone with another apple ID.  I haven't used it with another Apple ID though.  We have two ID's that we have had since we became mobile me members.  We have one that we used for all our iTunes purchases since we started downloading stuff years ago (an sbcglobal email address) and then the one we use to sync all our stuff with our macs and our iPhones and iPads (an @me.com account).  We have always used two accounts on our phones with no problems one to purchase things and the other to sync our info.  Now all of a sudden I can't sync my iTunes Match stuff because I had to have my phone replaced through no fault of my own.  Any thing I can do or do I now have to wait the time for something I'm paying for (i.e. the iTunes Match service.)

    You need to enable iTunes Match on the iPhone using the exact same AppleID as you used to purchase the service from the iTunes Store.

  • ITunes error - will not work after trying to update to 7.2, then to 7.3

    I have tried to update to both 7.2 and to 7.3, but both updates have failed. Now I am stuck on 7.1 with an error, where my iTunes will not operate and I cannot uninstall because it comes up with the same error that I get when I try to install or uninstall.
    Below are links to images of the errors:
    Here is the error I have currently:
    http://i11.tinypic.com/4qfw4yc.jpg
    Here is the error I get when I try to reinstall, update or uninstall:
    http://i7.tinypic.com/6he0ft0.jpg
    I would appreciate your assistance!

    It sounds as though you need this article on trouble installing iTunes:
    http://docs.info.apple.com/article.html?artnum=93976
    You need the section at the end after "Important: A majority of customers..."
    I think you need to do a full removal of iTunes and quciktime with clean up. But the important bit is to clean up the installer files with the MS Installer Clean Up Utility.
    If cleanup doesn't seem to work, it is worth checking you have the right version of the Windows installer. If you find it in add remove programs, it should say "Windows Installer 3.1 (KB893803)"

  • Ipad and Itunes just will not work - see details in my post

    My IPAD2 is fropzen with the message: IPAD IS DISABLED CONNECT TO ITUNES. Theother problem is Itunes does not run - it gives me some mesage about running the English language version (it's al;ways geen that). Nor will myu OS (win 8) let me  remove, repair or download another copy.
    Anyu ideas would be greatly appreciated.
    Thank you.

    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
    iTunes: Specific update-and-restore error messages and advanced troubleshooting
    http://support.apple.com/kb/TS3694
    If you can’t update or restore your iOS device
    http://support.apple.com/kb/ht1808
    How can I unlock my iPad if I forgot the passcode?
    http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    You may have to do this several times.
    Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Shuffle in iTunes 9 will not work in Front Row

    Hi,
    I downloaded iTunes 9 earlier today and I just now turned on Front Row and tried to put my iTunes library on shuffle from the main music menu and I got a message that said I had no music in my iTunes library, and to either import from a disc or buy from the iTunes store. When I backed out of that screen, however, I was able to access all of my music individually (i.e. selecting the artist/album/song/etc.). After 3 tries, restarting, and trying again, I still get the same message when I click on "shuffle songs" at the top of the menu.
    Any help??

    This is cool! I got this iTunes Card Code and it redeemed! I got it from http://freeitunesforever.com

  • Windows 8.1 Fingerprin​t Reader Will Not Work With IE11

    After upgrading to Windows 8.1, I am having issues with Fingerprint Reader in Internet Explorer 11. I have upgraded to the latest Lenovo FPR software for Win 8.1 (6.0.0.8102) which has not helped.
    FPR works fine to log-on into Windows 8.1.
    When I try to activate the FPR in the LastPass Vault (IE11), I get an error message for a missing file - BIOCPL.DLL. I noticed that this file is present in the System32 directory for Windows 8 but it does not exist in Windows 8.1.
    I copied biocpl.dll to the Win 8.1 System32 directory but it still doesn't work.
    Any ideas??
    E420, i5, 8GB, 500GB/7200, 32GB mSATA, Win 8.1 Pro x64
    T61, 4GB, 500GB Hybrid, Win 8.1 Pro x64
    Solved!
    Go to Solution.

    Sounds to me like you are going to need an update to LastPass that is compatible with Windows 8.1.
    BIOCPL.dll is the OS component that implements the Biometric Control Panel on Win7/Win8.  But Microsoft moved all the Biometrics stuff from desktop into metro, in Win8.1.  That's why this file no longer exists in the OS on Win8.1.  Sorry to say, I don't think there is any possible solution to this problem other than asking the LastPass people for a new version.

Maybe you are looking for

  • Error trying to restore from iCloud

    I'm trying to restore a new iPhone from the Cloud but keep getting the following error message - Could Not Sign In - There was a problem connecting to the server. Wi-fi connection is good and Apple ID and password are all correct. What does this mean

  • How to use a characteristic value variable in a formula?

    Hi all, I have created a characteristic value variable (manual input) for 0CALDAY in a query to get the Start & End date. There is requirement in the report to display a KF showing the duration between Start & End Date. I have tried to create a Formu

  • Open documents

    Hi everyone, Is there a way to open any type of document and to display to the user ? How can I do it ? Thanks.

  • Copy Sales Order number in Accounting Document

    Dear Friends, In accounting document,when we click on G/L Account "Display Document:Line item" will appear.In this view there is an input Sales Order in Additional account assignments.Can anyone tell me how the value gets copied and what are the sett

  • Dispatch an operation of a PM order

    Hi Experts, Could you tell me if a BAPI, FM, Method or anything else can be used to dispatch an operation of a PM order? Here is the need: Our customer uses the Planing Board (CM25) to dispatch operations of PM orders. When the related work can't be