I have Windows 8 on a Dell laptop, i upgraded to 8.1 When i download iTunes, when i click finish, awindow pops up that says," Application support not found, uninstall iTunes and download again,Error 2" After 3times,it still says same thing.
Hello Community, I hope ya'll can help me. I have a Dell Laptop with a 32-bit Operating System, running Windows 8 with Media Center. I Upgraded to Windows 8.1 recently. Some of my Apps I had with Win. 8 were not compatible with 8.1. This next is my problem, When I install iTunes everything downloads fine until I click finish. @ windows pop up, 1 after the other. The 1st one says, " Application Apple Support not found, Uninstall iTunes and try download again. " Then a second window says, " Error 2 ", "The iTunes Application cannot run without the Apple Support ...." What is this "Error 2" and is there a fix for this? I appreciate everyones knowledge in helping me come to a solution. as I aint no hi-tech redneck! Thank you, Bob Bryan
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2
Similar Messages
-
Unable to load ITUNES onto PC HP, windows 7 Home Version. Error message reads "Application Application Support not found". "Uninstall and reload". I have done that 4 times on Explorer and Firefox without success. Help??
I had gotten a similar problem, except with "provider services", i believe, but i solved it by copying sqlite3.dll from E:\Program Files\Common Files\Apple\Apple Application Support to E:\Program Files\Common Files\Apple\Mobile Device Support. doing that solved my first problem, but now i have been getting the error described in this topic (unable to load dataclass info... etc.). i tried reinstalling itunes (i already had 9.1.1, and thats what i reinstalled) by using the method described on apples site (using the "remove programs" tool in the control panel) and then downloading and installing itunes. when i opened it again, i still got the same error, and just now i got an error saying "the instruction at "0x00aadb6b" referenced memory at "0x00000008". the memory could not be read" it gave me the option to cancel and debug, or to press ok and terminate the program. I tried pressing cancel, and the popup went away but nothing else happened. a minute later the popup was back, so i pressed ok and itunes quit. Upon opening Itunes again, i got the very same error. sorry for the long post, but its really been bugging me. thanks for any help you might give, and if you need anymore info, feel free to contact me.
-
I've just installed iTunes on my Windows 8.1 (64-bit) laptop, but i can't open it. It keeps telling me that Apple application was not found. What should i do now?
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
I have windowa 7 operating system. When I install I Tunes, I get an error message "Apple Application Support not found".
I have uninstalled and reinstalled I Tunes multiple times with same error.
Can anyone offer a solution?See Troubleshooting issues with iTunes for Windows updates.
tt2 -
cant install Itunes on my work computer, get error message: "Apple Application support not found, so i uninstall and reinstall again and its the same message
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if AAS won't install normally.
tt2 -
Apple Application Support Not Found (Error 2)
I just got a new iPad and was told to install iTunes on my PC to get started. I tried installing the lastest version of iTunes and at the end of the installation process I get 2 pop ups saying "Apple Application Support Not Found" I have uninstalled and reinstalled iTunes about 4 times now with the same problem. What do I need to do to successfully install iTunes and is there any way to use my iPad without connecting to a PC first? Please help, I would really like to use my graduation present!
Many thanks.
Okay. We'll try a "standalone" installation of Apple Application Support, then. (It still may not install, but at least we'll have a better idea of what the problem is, based on any error messages we might get.)
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Use WinRAR to expand the contents of the iTunesSetup.exe or iTunes64Setup.exe into a folder.
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us no what it says. (Precise text, please.) -
Apple application support not found error? need help
I tried updating my iTunes to the current version and i've encountered several errors. After completely uninstalling and reloading iTunes, I now get the following Error: "Apple Application Support not found. Apple Application support is required to run iTunes Helper. Please uninstall itunes and reinstall. Error 2" Can someone help me? I've tried the Winrar tactic and still does not work. I am using windows vista. I want to upgrade itunes so I can use Apple TV.
thanks!Gives
me error message Apple Application support was not found.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
HELP"apple application support not found when installing itunes after a hard drive crash and replace
HELP" error "apple application support not found" when downloading itunes after a hard drive crash and replacement????
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Itunes won't install. Error message: Apple Application Support not found
Itunes won't install. Error message: Apple Application Support not found. What is the fix for this?
It is always these four updates that fail. I've tried downloading and installing them seperately from apple downloads. I've tried various recommended fixes, and nothing I can figure out works. Before these problems, itunes worked on the computer for a year.
Thank you again for wanting to help me.
Ken
1) Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
Installation date: 12/17/2011 7:58 PM
Installation status: Failed
Error details: Code 643
Update type: Important
A security issue has been identified leading to MFC application vulnerability in DLL planting due to MFC not specifying the full path to system/localization DLLs. You can protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkId=216803
Help and Support:
http://support.microsoft.com
2) Security Update for Microsoft Office Excel 2003 (KB2596954)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
A security vulnerability exists in Microsoft Office Excel 2003 that could allow arbitrary code to run when a maliciously modified file is opened. This update resolves that vulnerability.
More information:
http://support.microsoft.com/kb/2596954
Help and Support:
http://support.microsoft.com/?LN=en-us
3) Update for Microsoft Office Outlook 2003 Junk Email Filter (KB2597035)
Installation date: 12/17/2011 7:56 PM
Installation status: Failed
Error details: Code 57E
Update type: Important
This update provides the Junk E-mail Filter in Microsoft Office Outlook 2003 with a more current definition of which e-mail messages should be considered junk e-mail.
More information:
http://support.microsoft.com/kb/2597035
Help and Support:
http://support.microsoft.com/?LN=en-us
4) Security Update for .NET Framework 3.5.1 on Windows 7 and Windows Server 2008 R2 SP1 for x64-based Systems (KB2478662)
Installation date: 12/17/2011 7:52 PM
Installation status: Failed
Error details: Code 80070BC9
Update type: Important
A security issue has been identified that could allow an attacker to compromise your Windows-based system that is running the Microsoft .NET Framework and gain complete control over it. You can help protect your computer by installing this update from Microsoft. After you install this item, you may have to restart your computer.
More information:
http://go.microsoft.com/fwlink/?LinkID=211424
Help and Support:
http://support.microsoft.com -
trying to install itunes on win 8.1. keep getting error apple application support not found. asks me to uninstall and install itunes. i tried several times and keep getting same error.
With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
I download itunes it says its successfully installed but then when i try to open it is says "Apple Application Support not found"
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, does iTunes launch properly now?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
Im running windows 8 on my desktop. i tried to reinstall itunes and when i open it i get the following message " Apple Application Support not found, Apple Application Support is required to run iTunes". I have a folder on my desktop that has files in it that says Apps removed during refresh and there is Apple files in there. Im guessing this could be a windows issue but Im not to good with computers. Any help would be great.
Hello agerveler,
Thanks for using Apple Support Communities.
It sounds like we may need to do a complete removal of iTunes and its components, followed by a reinstall. Follow the instructions in the following article to resolve your issue:
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
http://support.apple.com/kb/HT1923
Take care,
Alex H. -
That worked, however I now get two error messages when I install I Tunes:
o Apple Mobile Device failed to start.
o Apple Application Support not found.
This were of course deleted in the recommended re-install procedure to resolve the dll file, but repeated uninstalls and installs simply bring up these two error messages with a recommendation to install I Tune again. Installing the new I Tunes version seems to be problematic per the discussion groups and has no simple solution. SHould not the Genius bar be able to resolve this at an Apple Store? Want to buy a new I Phone 5S, but this problem effectively stymies this.See Troubleshooting issues with iTunes for Windows updates.
tt2 -
Installing itunes and am getting an error 2 message that say apple application support not found
Am trying to install itunes on my home computer windows 7 and am getting an error message that says Apple Application Support not found, error 2. Have uninstalled and reinstalled twice and get same error message.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it, which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if one component, such as Apple Application Support, won't install normally.
tt2 -
Apple application support not found : Error 2 (Windows error 2) & Error 2
Hello apple-dudes,
iTunes install says it cannot run because Apple application support not found but required to run iTunes / iTunes helper.
I get 2 error message :
iTunes : Error 2 (Windows error 2)
iTunesHelper : Error 2
End result iTunes open but don't recognize my iPhone 5 when connected via the USB port.
My OS is Windows 7 & 64 bits.
I already tried to de-install / re-install iTunes but problem still there :-(
Thanks for your help.
Regards,
MarcoFor general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
The section Install missing components has advice on breaking down the iTunes installer into the individual .msi files which might prove useful if a component such as Apple Application Support won't install normally.
tt2
Maybe you are looking for
-
Hello, Has anybody found a solution for the extreme heat generated by HP ENVY 17. Thanks, Sanjay
-
Error while loading data into application
I have created new application successfully. Loaded LCM backup successfully. Imported all the rules successfully. While loading data in plan1 through Essbase Administrator Services. i got this error: "Parallel dataload enabled: [1] block prepare thre
-
Internet Explorer's forward/backward for next/previous image
In addition to right/left arrow to move to next/previous image I would like LR team to add this keyboard shortcut: Use Internet Explorer's forward for next image. Use Internet Explorer's backward for previous image. Here is the reason. I have ViewSon
-
How to keep the Viewer window active during cutting and inserting to timeline?
Greetings all, I'm a football coach looking to use FCP to do my film breakdowns. Been learning as much as I can about FCP and I've done some trial runs, so far so good, though it's a bit slow going since I am a football coach after all . Anyhow, cu
-
HTMLDataSet: changing URL in "null" doesn't works
Hi, I have this page, but it doesn't works. I need to have the possibility that by clicking the "change" button, the "ds1" dataset would become able to load as source the internal table called "sourceTable", but it doesn't works. Any suggestion?? Tha