I have Windows XP,Firefox does not recognize my Adobe flash player.How doI fix this.

I have the latest version of Adobe flash player,It works with IE,it will not work with Firefox.It will not download flash player,because it is already installed,How do I get to work with Firefox?Thank you for your time.

There are 2 versions of Adobe Flash:
*an '''ActiveX version''' for IE only
*a '''Plugin version''' for most other browsers including Firefox
*On a Windows system, you should always update both individually.
'''''You do not appear to have the Plugin version for Firefox installed. ''''' If you did, in Add-ons > Plugins you would see "Shockwave Flash ''(version)''". If "Shockwave Flash" is there and is disabled, click the "Enable" button.
Check your Plugins often --> http://www.mozilla.org/en-US/plugincheck/
*only the most popular/used Plugins are known by this page
*page will detect only installed, '''''enabled''''' Plugins
'''Install or update Adobe Flash''' 
#'''Using Firefox''', go to the following link and SAVE the download to your desktop so you can find it later. Un-check any items on that page that you do not want to download (i.e., "McAfee Security Scan Plus":
#*http://get.adobe.com/flashplayer
#When the download is finished, close Firefox (File > Exit '''''OR''''' Firefox button > Exit)
#Click or double-click on the file you just saved to your desktop
#*In the installation window that appears, click the box to the left of "I have read and...." to place a check mark in the box
#*The "Install" button in the lower right corner will now be highlighted, click it.
#*The installation is quick.
#Start Firefox and test your installation here: https://www.adobe.com/software/flash/about/
#To update/install the ActiveX version for IE '''''only''''', repeat the process, '''but use IE to go to the above website'''.
'''If this reply solves your problem, please click "Solved It" next to this reply when signed-in to the forum.'''
Not related to your question, but...
You may need to update some plug-ins. Check your plug-ins and update as necessary:
*Plug-in check --> http://www.mozilla.org/en-US/plugincheck/
*Adobe Shockwave for Director Netscape plug-in: [https://support.mozilla.com/en-US/kb/Using%20the%20Shockwave%20plugin%20with%20Firefox#w_installing-shockwave Installing ('''''or Updating''''') the Shockwave plugin with Firefox]
*Adobe PDF Plug-In For Firefox and Netscape: [https://support.mozilla.com/en-US/kb/Using%20the%20Adobe%20Reader%20plugin%20with%20Firefox#w_installing-and-updating-adobe-reader Installing/Updating Adobe Reader in Firefox]
*Shockwave Flash (Adobe Flash or Flash): [https://support.mozilla.com/en-US/kb/Managing%20the%20Flash%20plugin#w_updating-flash Updating Flash in Firefox]
*Next Generation Java Plug-in for Mozilla browsers: [https://support.mozilla.com/en-US/kb/Using%20the%20Java%20plugin%20with%20Firefox#w_installing-or-updating-java Installing or Updating Java in Firefox]'

Similar Messages

Windows 98, FireFox 3.5.7 and Adobe Flash Player

Hi, everyone,
I am an old man and I have a very old machine with Windows 98. Any newer OS can't be used there. Newertheless, FireFox 3.5.7 (Belarusian version) does work here properly. Recently I have tryed to install an old version of the Flash Player (9.0.16) here. It works in IE (6.0), but I can't view anything at FireFox. There is a blank field instead of a content. Is there any way to fix the problem? Thank you for any good advise, but please do not say my that I am must change my computer or the OS, it's impossible...

What means "close out"? It's gone where; do you get any error messages?

Why the Apple products does not work with Adobe flash player?

Could be better if the Apple products work with Adobe Flash Player, I know that Steve does not like to work with them, but I think will be necessary soon.

From Adobe's own site:
*** NOTE: FLASH PLAYER IS NO LONGER BEING UPDATED FOR NEW DEVICE CONFIGURATIONS. FLASH PLAYER WILL NOT BE SUPPORTED ON ANY ANDROID VERSION BEYOND ANDROID 4.0.x ***
While Flash Player remains on Google Play for installation on Android devices that are certified by the manufacturer, installing Flash Player on an uncertified device may result in unexpected behavior and can potentially destabilize your device. A list of certified devices can be found at http://www.adobe.com/go/certifieddevices. Flash Player WILL NOT be supported on any device shipped with or upgraded to an Android version beyond Android 4.0.x
Further comments on what is the case on Android devices is irrelevant. Adobe has dropped further development of Flash for mobile devices and Apple has made no indications that they have any plans to do so themselves, so it is highly unlikely that there will ever be a native Flash player for any iOS device.
'nuff said on the matter. Regards.

Creating H.264 FLV file as per Spec, does not play with Adobe Flash Player 10

1] We have developed an application to encapsulate H.264 video inside FLV container, following the "Adobe Video File Format Specifications 9". According to the specification the H.264 video data is embedded in FLV tags, as follows
FLV Headers: Meta Tag: Sequence of Video Tag.
But in spite of following the specifications, Adobe Flash Player (version 10) could not play this FLV file. However, some players were able to play this FLV file. The fact that Adobe did not play it was very surprising.
2] We searched and finally found one FLV file, which contained H.264 video (unlike others which usually contained Sorenson's H.263). This file was played fine by Adobe Flash Player. So it led us to investigate further and we found that
[A] the video tag was preceded with 2 byte length of the every "contained" H.264 NALU. This applied to all the NALUs / I-slices/P-slices and so on. This is not documented.
[B] Only the first video tag (containing video sequence params), is preceded by the sequence "01 4D 00 15 FD E1" followed by 2 byte length and then the video data (sequence parameters in this case). What are these additional bytes ? where are they documented ?
Could you pls share your views about the above and point us to the documents, if any, which are in agreement with the above observations.We think there is a discrepency in the document related with authoring FLV file with H.264 content.
Thanks,
Abhijeet Wakle
Sigro Systems

You could push it out to one or two users and test. Moving up to the latest version of Flash Player is USUALLY a good idea, however, if you happen to be on Captivate 4, be aware that there was an issue reported some time ago that once you upgraded your development machine to Flash Player 11 it interfered with publishing out courses. I cannot remember seeing a bugfix issued to Cp4 users for this (someone correct me if I'm wrong). If you're on Cp5 or 5.5 this shouldn't be an issue.

Mac does not switch off. Any idea how to fix this?

I already repaired the rights on the disk....
Mac does not drive down, obviously after certain programs have been started. One of those programs is itunes. I have to use the power switch button for switching it off. Mac can be driven down normally immediately after start-up.....Any idea what to do?

Yes, this was exactly the sequence and again it worked...
Here is the result of the ps ax command:
Last login: Fri May 25 09:22:33 on console
mbp081:~ web$ ps ax
PID   TT STAT      TIME COMMAND
    1   ?? Ss     0:01.98 /sbin/launchd
    9   ?? Ss     0:07.96 /usr/libexec/kextd
   10   ?? Ss     0:03.20 /usr/sbin/DirectoryService
   11   ?? Ss     0:00.11 /usr/sbin/notifyd
   12   ?? Ss     0:00.11 /usr/sbin/syslogd
   13   ?? Ss     0:02.17 /usr/libexec/configd
   14   ?? Ss     0:00.08 /usr/sbin/distnoted
   15   ?? Ss     0:00.84 /usr/sbin/blued
   16   ?? Ss     0:00.10 /usr/sbin/diskarbitrationd
   19   ?? Ss     0:00.41 /usr/sbin/mDNSResponder -launchd
   22   ?? Ss     0:01.90 /System/Library/CoreServices/coreservicesd
   25   ?? Ss     0:00.20 /usr/sbin/securityd -i
   32   ?? Ss     0:00.07 /usr/sbin/ntpd -c /private/etc/ntp-restrict.conf -n -g -p /var/run/ntpd.pid -f /var/db/ntp.drift
   33   ?? Ss     0:00.12 /usr/sbin/cupsd -l
   34   ?? Ss     0:00.37 /usr/sbin/krb5kdc -n
   35   ?? Ss     0:00.01 /usr/sbin/cron
   38   ?? Ss     0:00.08 /System/Library/PrivateFrameworks/MobileDevice.framework/Versions/A/Resources/u sbmuxd -launchd
   39   ?? Ss     0:00.02 /sbin/SystemStarter
   43   ?? Ss     0:00.06 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Su pport/RFBRegisterMDNS
   45   ?? Ss     0:00.38 /System/Library/Frameworks/CoreServices.framework/Frameworks/Metadata.framework /Support/mds
   46   ?? Ss     0:00.61 /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow console
   47   ?? Ss     0:00.01 /usr/sbin/KernelEventAgent
   49   ?? Ss     0:00.64 /usr/libexec/hidd
   50   ?? Ss     0:00.06 /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/Support/fseventsd
   52   ?? Ss     0:00.01 /sbin/dynamic_pager -F /private/var/vm/swapfile
   58   ?? Ss     0:00.01 autofsd
   66   ?? Ss     0:02.25 /usr/libexec/ApplicationFirewall/socketfilterfw
   81   ?? Ss     0:00.03 /usr/sbin/ocspd
   88   ?? S      0:00.21 /Applications/Retrospect Client.app/Contents/Resources/retroclient
   89   ?? Ss     0:00.01 /Library/StartupItems/ParallelsTransporter/llipd
   93   ?? Ss     0:04.04 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/CoreGraphic s.framework/Resources/WindowServer -daemon
   94   ?? Ss     0:00.11 /usr/sbin/nmbd -F
114   ?? Ss     0:00.05 /usr/sbin/coreaudiod
136   ?? Ss     0:02.00 /sbin/launchd
140   ?? S      0:02.16 /System/Library/CoreServices/Dock.app/Contents/MacOS/Dock
141   ?? S      0:01.01 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer
142   ?? S      0:03.13 /System/Library/CoreServices/Finder.app/Contents/MacOS/Finder
146   ?? S      0:00.01 /usr/sbin/pboard
147   ?? S      0:00.44 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd
150   ?? S      0:00.62 /usr/libexec/UserEventAgent -l Aqua
153   ?? S      0:00.07 /System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent
158   ?? S      0:00.13 /System/Library/CoreServices/AirPort Base Station Agent.app/Contents/MacOS/AirPort Base Station Agent -launchd -allowquit
159   ?? S      0:00.03 /System/Library/CoreServices/CCacheServer.app/Contents/MacOS/CCacheServer
160   ?? S      0:00.07 /System/Library/CoreServices/RemoteManagement/AppleVNCServer.bundle/Contents/Ma cOS/AppleVNCServer
171   ?? S      0:00.24 /System/Library/Frameworks/SyncServices.framework/Versions/Current/Resources/Sy ncServer.app/Contents/MacOS/SyncServer
178   ?? Ss     0:00.14 /usr/sbin/smbd -F
183   ?? S      0:05.65 /Applications/iTunes.app/Contents/MacOS/iTunes -psn_0_65552
186   ?? S      0:00.07 /Applications/iTunes.app/Contents/MacOS/iTunesHelper.app/Contents/MacOS/iTunesH elper -psn_0_69649
188   ?? Ss     0:01.01 /System/Library/PrivateFrameworks/ApplePushService.framework/applepushserviced
192   ?? S      0:01.09 /Applications/Utilities/Terminal.app/Contents/MacOS/Terminal -psn_0_73746
195 s000 Ss     0:00.07 login -pf web
196 s000 S      0:00.02 -bash
204 s000 R+     0:00.01 ps ax
mbp081:~ web$

I installed to Java 7 Update 13 64 bit today but firefox does not recognize

I installed to Java 7 Update 13 64 bit today but firefox does not recognize it. I have removed all older versions of Java from my Windows 7 64 bit Laptop.

Install the 32bit version. FF is a 32bit application even on a 64bit platform.

Windows 8.1 does not recognize

My Windows Surface Pro does not recognize our 6th Generation iPod Nano

Hi kathyt8952 ,
Would you please share us more details of the issue ?
Have you checked the driver issue from the device manager ?Have you tried to connect the device from another USB port to have a check ?
We can take the following steps to have a check .
1.Open "run" from the start menu, and run "services.msc".
2.Search "Apple Mobile Device".
3.On "status" column right click and then click on "Properties"
4.In the "general" tab find the "startup type" drop-down arrow menu and make sure "automatic" is selected.
5.Also in the general tab check the "service status". If it does not say "started" then click the start button.
6.At the bottom of the properties window click "apply".
If the issue persists, we can refer to the following link to have a troubleshoot :
iPhone, iPad, or iPod not recognized in iTunes for Windows
https://support.apple.com/en-us/HT204095
We may also need to ask for help from the Apple Forum .They may have some good advices for you .
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows 8.1 does not recognize my iphone.

windows 8.1 does not recognize my iphone.

Hi kathyt8952 ,
Would you please share us more details of the issue ?
Have you checked the driver issue from the device manager ?Have you tried to connect the device from another USB port to have a check ?
We can take the following steps to have a check .
1.Open "run" from the start menu, and run "services.msc".
2.Search "Apple Mobile Device".
3.On "status" column right click and then click on "Properties"
4.In the "general" tab find the "startup type" drop-down arrow menu and make sure "automatic" is selected.
5.Also in the general tab check the "service status". If it does not say "started" then click the start button.
6.At the bottom of the properties window click "apply".
If the issue persists, we can refer to the following link to have a troubleshoot :
iPhone, iPad, or iPod not recognized in iTunes for Windows
https://support.apple.com/en-us/HT204095
We may also need to ask for help from the Apple Forum .They may have some good advices for you .
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Windows Security Suite does not recognize Verizon Internet Security Suite

Windows Secuity Suite does not recognize that the Verizon Internet Security suite on one of my PC's is running and keeps popping up aWindows Security Alert. The Firewall is enabled within Verizon Internet Security suite.
My other PC's don't have this issue.
All PC's are running Windows Vista Home Premium.
Any ideas?
Cheers,
Mark

well that error message is saying that Windows security center no longer supports the way that the VISS is reporting. Which means that even though VISS is working and it is even reporting its status to WSC. WSC doesnt recognize it anymore. Likely one of the windows updates made the change. I can see the fight comming now. Verizon is going to say. Its working and if the other program doesnt support it, too bad. And windows is going to say the same thing in reverse. My guess would be that it will probably stay that way unless Verizon or Microsoft get enough complaints to make a change in the recognition system.
But the good news is that VISS is running and protecting you. The WSC just doesnt "speak the same language" anymore and cant understand the message from VISS saying "I'm up and running"
====================================================================================
Error exists between keyboard and chair.

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

I had to replace my Iphone 5c with a new one. Now, my windows 7 pc does not recognize my iphone. Reinstalled itunes. Apple mobile device is running. I did whatever I could find on the internet still no luck. Any suggestions? Thnx

You have done everything verbatim included with this link?
http://support.apple.com/kb/ts1538

Firefox does not recognize SSL Certificate issuer Entrust Certification Authority – L1K, but Entrust Certification Authority – L1C is ok?

We have a new Entrust SSL Certificate with issuer Entrust Certification Authority – L1K which Firefox does not recognize. Internet Explorer and Chrome are ok.
On a different system we have an Entrust SSL Certificate with issuer Entrust Certification Authority – L1C which is ok with Firefox.

Did you verify that all intermediate certificates are installed on the server?
You can inspect the certificate chain via a site like this:
*http://www.networking4all.com/en/support/tools/site+check/
*https://www.ssllabs.com/ssltest/

My new computer with Windows 8.1 does not recognize my iPhone when connected via USB.

My new Dell Computer with Windows 8.1 does not recognize my iPhone 5 when connected via USB. I have reinstalled iTunes to no avail.

Hey, I may have to if I can't get this one to work!!
I have tried a different USB to no avail. Both cables work on my old Dell so I don't believe they are the issue.
I uninstalled iTunes as directed by Apple Support and reinstalled. Apparently, Apple Mobile Device Support is not loading with it because it does not show up in programs.

Upgrade to media source 5 and now does not recognize my Zen Touch player!?

JUpgrade to media source 5 and now does not recognize my Zen Touch player!
st off, I was having issues with mp3's transferring to my zen touch, it would say file cannot transfer, invalid format or something of the like.. The creative audio converter would not allow the file to be converted as it said the source was not availble, all odd as the files worked fine on my computer and were mp3 format. I did get them to transfer after downloading another 3rd party converter, I wanted to get past using another program though so I updated to media source 5, along with firmware updates to most recent for the zen touch.
Once I had updated it would not recognize my player, I opened version 3.xxx whatever and it did recognize. Thinking maybe it has an issue with both being installed I unistalled the old version. Same problem, still does not see my player. I upated the driver for the player as well, and my computer now could see the zen touch instead of unknown usb device, media source 5 no go still at this point. I opened windows media 0 and it saw the player and I could transfer files, but the lay out and editing cababilities are limited.
Basically I want to know what to do get this thing detected so I can use media source 5 to organize my files. Someone please help me.

N Oh how I love the beauty of forums! Fantastic. So you know the fix went for my issue here, I had already upgraded the zen/jukebox driver to version 2.0 to no avail, and did not get the play for sure firmware as it says all data will be lost, but I did upgrade with the other option on the support downloads section before as well to no avail. Thanks to?GuyGraham, after I installed the app update for Creative ZEN and NOMAD Jukebox Plugin 5.00.22 for Creative MediaSource 5 Player/Organizer it works once again!! I just do not see how this file isn't included with the media source 5 application in the first place. Either or thanks a lot you guys, problem sovled!

Canon 60d does not recognize 430ex II flash. Any suggestions?

Canon 60d does not recognize 430ex II flash. On the menu screen it says that the flash is either of or not compatible.
Any suggestions? Any books or guides recommended?
Thanks
Solved!
Go to Solution.

A few...
I trust you have verified that the flash fully powers up and you get the red pilot lamp showing it's ready to fire.
On your 60D menu system, if you find the "Flash control" option, you can make sure you haven't set the external speedlite to "disable" -- although I think in that mode you wouldn't get the message you're describing. i.e. I doubt this is it but you may as well double-check.
A more common reason for failure is that the flash camera can't fully communicate with the flash. This is usually because of a bad connection in the "foot" of the flash.
The flash needs to be fully seated in the hot-shoe rails. Make sure the lock level is released, slide the flash fully into the hot-shoe rails until it stops. Engage the lock on the foot so it's held securely (it will will slide to the right and then click-to-snap (you have to press the tiny button to release the lock lever). This doesn't *just* snug the foot... it also drops a tiny metal locking pin into a small hole in the hot shoe so that the flash cannot slide out.
At that point, the "foot" of the flash is actually the "ground" connection and it's in contact with the metal rails of the hot-shoe AND all five of the contacts on the foot should be in contact with the camera.
This assumes there's nothing wrong with the flash -- and there could be something wrong with it. So if you're confident you've fully seated the flash, then remove the flash and inspect the "foot" on the flash.
The metal plate on the foot of the flash should be solid... if you use your fingers and attempt to wiggle it (don't use heavy force... we don't want to break it -- just grasp it firmly and see if it will wiggle at all) it should not move. If it does move it means that the foot has come loose and is not secured to the flash body (there are four very tiny screws which hold it securely but they can only be accessed from the inside of the flash.
Next... inspect the 5 metal pins on the foot of the flash. Each of these pins is spring-loaded so that they'll press against the 5 contact points in the camera hot-shoe. I have occasionally seen a spec of something (e.g. a bit of sand) get wedged in and "jam" a pin so that it it no longer makes contact with the contact on the hot-shoe. If you view the foot of the flash from an edge-on view, all the pins should spring back out to the same height. If one of them is recessed lower than the rest... it's jammed.
The 430EX II has a solid reputation as a work-horse flash. It tends to be among the more reliable flashes on failures are rare.
It's also possible that the problem is in the camera. An easy test of this is to try another speedlite (if you have one or if you have a friend who has one.) If it is your speedlite, and it's under warranty, then it's probably a simple remedy by Canon service.
If the flash is not under warranty and the problem is with the hot-shoe connection not being solid, then it's often an easy repair. If a foot were irreparably damaged, the entire foot can be replaced (the whole thing is a module) and it's an easy and I believe somewhat low-cost repair.
Tim Campbell
5D II, 5D III, 60Da

What is going on with the Iphone4 home button. I see lots of people having issues, but not resolution. I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting lots of people.

What is going on with the Iphone4 home button locking up? I see lots of people having issues with the button becoming unresponsive, but no resolution.
Suggestions include:
Upgrade
Restrore
ReSync
Push harder,
etc.
I am running 4.2, but based on what I have read, 4.3 does not help. Apple has to do something about this, as it is affecting a large portion of the user community.

lfossier1 wrote:
Apple has to do something about this, as it is affecting a large portion of the user community.
No they do not and no it is not affecting a large portion of the user community.
If it is an actual hardware issue, the only fix is to repair or replace the hardware.
If it is a software issue, restoring as new will fix it.

I have Windows XP,Firefox does not recognize my Adobe flash player.How doI fix this.

Similar Messages

Maybe you are looking for