I hear buzzz type sounding from my laptop. What is wrong with it?

I hear buzzz type sounding from my laptop. What is wrong with it?

I have the same problem with my 5th-generation iPod! In addition to the red-slashed circle, my iPod will not show up in iTunes nor will it charge until I forcefully eject it and reset it.
Here is how I have learned to "fix" this problem over the years: make sure your iPod is fully charged before you try to plug it into your computer. The red-slashed circle comes on initially but you'll see that there's activity going on pretty quickly. The key seems to be having the iPod completely charged; even the slightest bit of depletion of battery makes everything go wrong.
If this fails, make sure iTunes is already open before you plug in your fully charged iPod. Finally, if this fails as well, disconnect your internet connection, have iTunes open, and then plug in your fully charged iPod. These last ideas are probably more placebo than truly useful, but I have had luck with them when I'm ready to throw my iPod and laptop out the window.
Hope this helps.

Similar Messages

  • Anyone from ORACLE knows what's wrong with oidspadi.sh

    Hi,
    I downloaded the Cygwin and am trying to run oidspadi.sh it keeps giving the following error.
    $ ./oidspadi.sh
    : command not found 28:
    : command not found 38:
    : command not found 43:
    : command not found 47:
    : command not found 51:
    : command not found 58:
    : command not found 59:
    : command not found 60: clear
      OID Active Directory Plug-in Configuration
    Please make sure Database and OID are up and running.
    : command not found 67:
    : command not found 70:
    ./oidspadi.sh: line 103: syntax error near unexpected token `fi'
    '/oidspadi.sh: line 103: `      fi
    [//code]
    I did set my ORACLE_HOME and also am able to connect to OID but don't what's wrong with the script. I am using 10.1.2.0.2 on windows.
    Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

    I found out the resolution please see Note:403469.1.
    Thanks

  • Forward() from a JSP:  what's wrong with this code?

    I have an application that was working. Then I tried to change it so that instead of the index page basically saying "Welcome. Click continue," it now tries to go directly to the Front Controller servlet without the user seeing the index page. Here's what I have in index.jsp:
    String path = request.getContextPath() + "/servlet/FrontController?thePage=\"index\"";
    RequestDispatcher rq = request.getRequestDispatcher(path);
    rq.forward(request, response);I did a print out of the path variable and it looks like this:
    /mealplan/servlet/FrontController?thePage="index"
    Now, when this was a normal page with a form that said
    <form action="<%= request.getContextPath() %>/servlet/FrontController" method="POST">and passed the page name in as a hidden parameter, the application worked fine. Now when I try to execute it, I get:
    /mealplan/mealplan/servlet/FrontController
    description The requested resource (/mealplan/mealplan/servlet/FrontController) is not availaIt looks like the "mealplan" part of the URL is being repeated (this is for dorm students to choose a meal plan). What am I doing wrong when I set up the URL for forwarding versus using the FORM element? Thanks.

    it appers to me that the jsp or servlet is already inside the mealplan directory through which it is trying to access /mealplan/...Hence it would be searching for /mealplan directory within the current working directory
    Anyways i dont think it should be too much to solve it out.

  • When I'm talking with others on my iphone 4s,he can't hear me except I insert the headset.What's wrong with it?

     

    Hello Duffy01,
    Thanks for using Apple Support Communities.
    To troubleshoot this issue with your microphone, please follow the steps in the article below:
    iPhone: Microphone issues
    http://support.apple.com/kb/ts5183
    Take care,
    Alex H.

  • After attaching the headset to the audio jack, i get sound from the laptop speaker

    after attaching the headset to the audio jack, i get sound from the laptop speaker

    This worked for me as well. Great find! I have gigabyte ep45-ud3r motherboard and I was getting all sound through external speakers except itunes was playing the sound out of the digital output instead of the speakers. I could see this when I went to control panel > hardware & sound > manage audio devices. I did the repair as described above and now I have sound in iTunes.

  • HELP !!! how to hear a simple sound from software instrument ????????

    It's a simple question, but I lost half an hour to find a button to hit play and hear one single sound from software instruments, but no success. I saw the video tutorials and they skip the basic.
    Very frustrating, I think I will have some difficulty in understanding how this program works.
    I cannot do nothing with it, besides adding chapters and songs from itunes.
    I need to take a course in Garage Band.
    I found it. It's a keyboard.
    Message was edited by: Pedro Santos

    http://seminars.apple.com/seminarsonline/garageband/apple/index1.html this is a helpful seminar with 3 videos you can watch a 31 minute & 22 min & 16 min, they should help watch them over & over

  • I am not getting any sound from my laptop. I have a Pavilion dv7 with beats audio.

    I am not getting any sound from my laptop.

    Try a hard reset.Disconnect all external devices first.
    1-remove power cord and battery
    2-press power button for 30 seconds
    3-reinstall only power cord for first startup.
    4-power on
    `````````````````````````````
    If still no sound,
    Go to the link below.Enter your Product Number as listed on Service Tag attached to bottom of notebook (may be under battery). You can also get the Product Number by pressing Fn + Esc key. After entering PN, click Next ,then choose Software & Drivers.On the next page use the dropdown to select your OS (probably Windows 7 64bit). A list will populate with drivers. Download & install the latest Audio driver.
    http://h10025.www1.hp.com/ewfrf/wc/siteHome?cc=us&lc=en
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • I can't turn my laptop on after I put it to sleep. What's wrong with it?

    Hi. What's wrong with my laptop? I put it to sleep then won't turn on anymore.

    First, you can force the Mac to shutdown by pasting in this command in Terminal (in Applications>Utilities). Only paste it in. Don't try to type it.
    sudo shutdown -h now
    Hit return. You will be asked for your admin password. Nothing will appear on the screen when you type it in. This is normal. You will also get a warning about using sudo, which you can ignore. This is safe. After you enter your pword, hit return again.
    Then, boot up again into Verbose Mode by holding down the v key at the startup chime. This will bring you to a screen that shows the boot sequence in text as its loading. It will go by kind of fast, but we're not interested in the bootup process. Next, do a normal shutdown and you may be brought to the same kind of text screen, which will show the shutdown sequence. (I know this works this way in Snow Leopard after booting in Verbose mode; not sure about Tiger, though.) If it hangs, it may show in what part of the shutdown process it's hanging. Have a camera or note paper ready to write down where it's getting stuck.
    One other thing to try is an SMC Reset. Unplug from wall power, leave for ten minutes, then hold in the power button for five seconds. Reconnect to power and startup again.

  • What is wrong with my IPhone? If you take a video you can't hear the audio but if I do a voice memo you can

    I don't know what's wrong with my iPhone, I can listen to music but if I try to take a video you can't hear my voice, if I take a voice memo you can hear my voice.

    try exiting the app and double clicking the home button. the multitasking apps will show up. delete all of them by holding them down and pushing the red circle (dont worry that doesnt remove them from the phone, just completely closes the app and makes your device run faster) then power off your phone by holding down thw lock button and sliding the red arrow when it comes up. wait about 5 seconds after its completely off and turn it back on. then try using the mic. hope this helps

  • What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and of facetime on settings,change id's.

    What is wrong with my facetime,i am using an ipad everytime i placed a call i can't hear it ringing and the person i am calling can't recieve my call as well,i did everything possible forced off my ipad,on and off facetime on settings,change id's, mute,unmuted,reset network settings!! But nothing change,i mean is there a problem with my ipad or the facetime has a problem right now?my friend seems doesnt have a problem with her ipad,it just happen suddenly yesterday it was ok but today when i tried calling my husband this is what happens, can anyone please help me!!

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • What is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

    what is wrong with my headphone jack? i have an ipod touch 4th generation ipod touch every pair of headphones and earbuds i plug in it has the same sound going to both sides.

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • What's wrong with this content type definition?

    Could someone tell me what's wrong with this content type definition? When I click "New Folder" in a custom list, it should bring two fields 1) Name 2) Custom Order. However in my case when I click new folder, I see 1) Member (which is totally
    weird) 2) custom order. Where is it getting that Member field from?
    <Elements xmlns="http://schemas.microsoft.com/sharepoint/">
    <!-- Parent ContentType: Folder (0x0120) -->
    <ContentType ID="0x012000c0692689cafc4191b6283f72f2369cff"
    Name="Folder_OrderColumn"
    Group="Custom"
    Description="Folder with order column"
    Inherits="TRUE"
    Version="0">
    <FieldRefs>
    <FieldRef ID="{35788ED2-8569-48DC-B6DE-BA72A4F87B7A}" Name="Custom_x0020_Order" DisplayName="Custom Order" />
    </FieldRefs>
    </ContentType>
    </Elements>

    Hi,
    According to your post, my understanding is that you had an issue about the custom content type with custom column.
    I don’t think there is any issue in the content type definition, and it also worked well in my environment.
    Did you have the Member field in the project?
    I recommend you create a simple project only with one custom Order column and one custom Folder_OrderColumn, then you can add more fields one by one.
    By doing this, it will be easier to find out the root cause of this error.
    Thanks,
    Jason
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jason Guo
    TechNet Community Support

  • HT3228 When I try to send an email from my Iphone it will not send and tells me the recepient will not allow relaying.  The email will sit in my outbox and then at some point will send.  It sometimes takes days.  What is wrong with my settings?

    When I try to send an email either new, or reply on my phone I receive a notification that recepient will not allow relaying.  The email will then sit in my outbox.  At some point it will send but it is hardly dependable.  What is wrong with my settings?

    The collum to the right listed similar problems.  The solution appears to be that under smtp outgoing settings the user name and password are listed as optional.  I have not plugged in the information and it seems to be working.  However from my office it always allowed the relaying.  The true test will be when I try to respond later from the road.
    Thank you for your help.

  • I have a brand new iPad newest version. Wifi. The messaging won't send out but I receive messages from others. What is wrong?

    I have the newest version of the iPad (3rd generation) with wifi. The messaging won't send out but I'm receiving messages from others when I'm using it. They also come through on my iphone at the same time. But I can't send them out on the iPad. I tried someone's suggestion of changing the DNS to 8.8.8.8 and that did not work to fix it. What is wrong with this thing?  Thank you in advance for your help.

    Are you trying to send a message to a cell number or an email address?  iPad does MMS, not SMS, meaning it can't send a message to a number.  It can send a message to an email address........

  • What is wrong with my Iphone 4s when it won't alert me by sound when text is received

    What is wrong with my Iphone 4s when it wont alert me by sound when text is received?

    You use the side control and make sure your phone isn't on vibrate.  Up is for ringer down is for vibrate.

Maybe you are looking for

  • Alternative of BAPI_ALM_ORDER_MAINTAIN

    Hi all,   The BAPI function module BAPI_ALM_ORDER_MAINTAIN is marked as obsolate in ECC6. If you know any alternative of this BAPI, Please let me know. Thanks & regards, Arnab. Moderator message: please do more research before asking. Edited by: Thom

  • Post switch over in oracle dataguard 11g

    Dear Guru, Switch over has been completed successfully from primary database to standby database. new primaray database is open and accessible but its showing his satus in v$database as below. database_role = primary switchover_status = not allowed d

  • Where can I download the Market app?

    Does anyone know where I can download the Market application itself?  My market app crashed and after a whole bunch of troubleshooting, I deleted it but now I can not find out where to download it again. Anyone know who has it for download? As an alt

  • Dock gone & other Finder issues

    Just updated my MacMini to the latest Safari & for MobileMe last night. This morning I turn on my computer and find - no dock, the yellow minimize button does not work, system preference pane is acting strange. I pulled out of the library and dropped

  • Season Only and Episode Only

    When trying to buy the newest Episode available of Logo's Real Momentum Documentary series, "GidyUp! On The Rodeo Circuit" it says Season Only where the Get Episode Button should be. When I then Click on the Whole Series it say's by Episode Only. Is