I imported 100 photos, when I was reading photos iphoto crushed, and when I restarted iphoto all photos imported had disappeared!Is there a way to find them. They were imported, they can not have disappeared from the hard disk?

I imported 100 photos from my camera (Canon) into iphoto. The importation went well, and when I was watching the photos, suddenly iphoto crashed. I restarted iphoto and realized that the photos had disapered. The events are availbble into iphoto but they are empty, the photos have dispeared. I can not believe they disapeared as they have been imported and read once, they must be hidden somewhere on the disk? Is there a way to find where they are?

Assuning you're running iPhoto 9 or later try the following:
1 - launch iPhoto with the Command+Option keys held down to open the First Aid window.
2 - Run Option #4, Rebuild Database.
OT

Similar Messages

  • Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me.

    Is there a way to recover old emails? I moved a few folders around on the hard disk and now my emails have reverted to Factory settings and all my old emails and address book have vanished. I am still running on 10.4.11 and Apple can not help me. Does anyone out there have any idea on how to recover my lost emails and/or addresses?

    Well, your profile info says 10.4.11, and you are posting your question in the iMac (PPC) category.  If you are running Snow Leopard, it must be a fairly recent Intel iMac.
    In that case, you should definitely post your question here
    https://discussions.apple.com/community/mac_os/mac_os_x_v10.6_snow_leopard
    where other Snow Leopard users can see your question.  Restate the problem, what error messages you get, and what you have tried already (for trouble-shooting).

  • Is there a way of "merging" songs in iTunes. Several times, I have downloaded from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs?

    Is there a way of "merging" songs in iTunes? Several times, I have downloaded recordings from the Internet, or recorded from CDs, then found the tracks broken up to appear as separate "Albums". I have a 5-movement symphony, which appears as 5 separate songs - Irritating!

    Try posting in a more appropriate forum, as this has noting to do with itunes U - the place where University/college/museums post education material.

  • Deleting the old Archive Log Files from the Hard Disk

    Hello All,
    I want to delete the old archive files of Oracle. These files are very old and consuming very huge disk space.
    Is there any way by which I can delete these files from the Hard Disk?
    Can I directly delete them using the Operating System Command?
    Will it cause any dilfference to the normal functioning of my Database?
    If I need to delete these files, do I need to bring the database down?
    Please guide me.
    I need to do this activity to make some space free on the Hard Disk.
    Thanks in advance.
    Himanshu

    Hi.
    Keep archived logs from time of last backup and forward to currenct time on disk together with the backup itself. And keep older archived logs together with older warm/cold backupfiles on tape as long as there is enough capasity or following your recovery strategy. This way you might be able to roll forward a recovery without restoring these files from tape which often the faster.
    Older archived logs can be deleted manually, with scheduled OS script or automatically with RMAN.
    Good luck
    rgds
    Kjell Ove

  • I can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name

    can not transfer date from one hard drive to another, I keep getting an error because I have two of the same file names and one file name is in caps and I cant change the file name. My original external has an error and needs to be reformatted but I dont want to lose this informations its my entire Itunes library.

    Sounds like the source drive is formatted as case sensitive and the destination drive is not. The preferred format for OS X is case insensitive unless there is a compelling reason to go case sensitive.
    Why can't you change the filename? Is it because the source drive is having problems?  If so is this happening with only one or two or a few files? If so the best thing would be to copy those over individually and then rename them on the destination drive.
    If it is more then you can do manually and you can't change the name on the source you will have to reformat the destination as case sensitive.
    Btw this group is for discussion of the Support Communities itself, you;d do better posting to Lion group. I'll see if a host will move it.

  • Not transferring from the hard disk to the flash

    Hi
    this was the result that l got but the problem is that  the file did not come from the hard disk into the flash memory the second time. I waited for at least 30mins and nothing happened. On top of the hyper terminal was the Transfer field which l used send and receive files sub at different times but the files do not transfer into the flash memory again. Pls could you advise me what more can l do, thanks.
    rommon 1 > xmodem c2600-adventerprisek9-mz.124-9.t2.bin
    Do not start the sending program yet...
             File size           Checksum   File name
         18836 bytes (0x4994)     0xd99d    bacdprompts/app-b-acd-2.1.2.2-ReadMe.txt
         24985 bytes (0x6199)     0xc81e    bacdprompts/app-b-acd-2.1.2.2.tcl
         35485 bytes (0x8a9d)     0x41de    bacdprompts/app-b-acd-aa-2.1.2.2.tcl
         75650 bytes (0x12782)    0x1ff9    bacdprompts/en_bacd_allagentsbusy.au
    WARNING: All existing data in bootflash will be lost!
    Invoke this application only for disaster recovery.
    Do you wish to continue? y/n  [n]:  y
    Ready to receive file c2600-adventerprisek9-mz.124-9.t2.bin ...

    Hi
    I can't start with the IOS. The point is that it is waiting for the files to be transferred which l do not understand. So what l do is to switch off the 2620XM but the result it says is that l am stopping the file from been transferred which is a real puzzle to me. Because at first the IOS is been transferred but why it is going back to the rommom mode still beats my imagination.

  • I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    I disabled my Macbook  Hard Disk and lock the settings, after i try to reboot, the system wouldn't come up. It refuses to read instructions from the hard disk. How can i enable the hard disk when the system wouldn't come up?

    How do you disabled it if running the same?

  • Your firmware can not be updated because the hard drive...SMC 1.3

    Hi all !
    I have a problem. I'm have a macbook pro Santa Rosa =
    Model Name: MacBook Pro
    Model Identifier: MacBookPro4,1
    Processor Name: Intel Core 2 Duo
    Processor Speed: 2.4 GHz
    Number Of Processors: 1
    Total Number Of Cores: 2
    L2 Cache: 3 MB
    Memory: 4 GB
    Bus Speed: 800 MHz
    Boot ROM Version: MBP41.00C1.B03
    SMC Version (system): 1.27f1
    This morning I saw the update for the SMC firmware (1.3).
    Before restarting, I have this error :
    http://img411.imageshack.us/img411/6606/26048579.jpg
    Your firmware can not be updated because the hard drive partition scheme may not be supported. You must be booted from a GUID partiton or RAID scheme.
    When I went into Disk Utility in order to check, here is what I have =
    Name : FUJITSU MHY2200BH Media
    Type : Disk
    Partition Map Scheme : GUID Partition Table
    Disk Identifier : disk0
    Media Name : FUJITSU MHY2200BH Media
    Media Type : Generic
    Connection Bus : Serial ATA 2
    Device Tree : /PCI0/SATA@1F,2/PRT0@0/PMP@0/@0:0
    Writable : Yes
    Ejectable : No
    Mac OS 9 Drivers Installed : No
    Location : Internal
    Total Capacity : 186.3 GB (200,049,647,616 Bytes)
    S.M.A.R.T. Status : Verified
    Disk Number : 0
    Partition Number : 0
    I thought Boot Camp could be involved becauseI know it's the only thing related to the EFI.
    I searched on internet, and Ifound nothing. There was a solution in order to reset the partition table, but the tool is no longer available. The link on on the application explains that I have to reformat my macbook pro. I find a bit weird to make this , I can't spend hours for backup / restore just because the SMC update does not work. have you any lead for me ?
    Thanks ,
    Razique

    Have you tried this:
    Repairing the Hard Drive and Permissions
    Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.

  • HT4623 Updating iPad2 to iOS 7, all my photos in camera rolls are gone, can't locate them anywhere?! Were they just deleted, or is there a way to find them? Did not have iCloud account, so not backed-up there.

    Just updated our iPad2 to iOS 7, and all my photos in camera rolls are gone, can't locate them anywhere. Were they just deleted, or is there a way to find them? Did not have iCloud account, so not backed-up there.

    We're you backing up to a computer using iTunes? If so, restore the backup from there.

  • 've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    've Password job a year ago to Mobil iPhone 4, and now lost and I can not wipe data from the device or transferred to the new device .. What do I do?

    iPhones require a SIM for activation.
    Put the device in DFU mode (google it) and restore via iTunes.

  • After "Replace with clip" the original clip can not be deleted from the project - why?

    After using "replace with clip" to replace clip A in the timeline with a new clip B , clip A can not be deleted from the project anymore.
    If you try to delete clip A, you get a warning, that it still has references in one or more sequences.
    If you continue and delete clip A, it seems to be deleted - at first!
    Unfortunately if you save and reopen the project, clip A is restored to folder "Recovered clips".
    It's not possible to really delete it.
    I also did not find a way to unlink clip B from A .
    The only thing you can do, is to revert the change by "Restore Unrendered" in the clip context menu. But that's obviously not helping
    I dont know if this is a bug or a feature. I understand, that it can be useful to undo the "replace clip" function, but why would anyone not want to be able to delete the original clip at all?
    help how to fix this problem is greatly appreciated!
    I use Premiere Pro CC 2014.2 (Win7 64bit)

    I'm sure it has nothing to to with other sequences.
    You can easily reproduce this behaviour:
    1. create a new project
    2. import 2 clips and name them "A" and "B"
    3. put "A" in the timeline
    4. ALT-drag "B" over "A" in the timeline (or right-click "A" in the timeline while selecting "B" in the project files and select "replace with clip ... from bin")
    5. delete "A" from the project files
    6. save and close project
    7. reopen project
    => "A" reappears in "Recovered clips" and can not be deleted.

  • HT201250 I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

    I don't store any files on my computer, I store them on a hd. Can I restore docs from my hard drive if they were backed up using time machine? And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.

    ehphotograph wrote:
    Can I restore docs from my hard drive if they were backed up using time machine?
    Yes.  
    And will it restore if the hd isn't even there? Like what if it got stolen or destroyed.
    Also yes.
    Directly-connected external drives (ie, USB, FireWire, Thunderbolt) are not backed-up by default.  You must remove them from the exclusion list in Time Machine Preferences > Options to get them backed-up.  (Network drives cannot be backed-up.)
    And they must be formatted for a Mac -- any variation of Mac OS Extended.
    If the drive is connected, you can browse or restore normally -- just go to the folder or document in question and Enter Time Machine.
    If the drive is not connected, it's a bit different.  See #E3 of Time Machine - Troubleshooting.
    Message was edited by: Pondini

  • HT1212 Can I access my iPhone 5 remotely that has a damaged screen that can not be unlocked from the actual phone itself?

    Can I access my iPhone 5 remotely that has a damaged screen that can not be unlocked from the actual phone itself?

    No.

  • I can not synchronize data from the prelude livelog

    I can not synchronize data from the prelude livelog apparently seems to be all right, more aprasenta the following message: The Open Clip does not support XMP.
    The Prelude can not apply metadata in it.
    please can someone help me

    Hi -
    When it comes to AVCHD footage, Prelude wants to leverage the complex folder structure in order to save metadata. If the file is just the *.MTS file and is not part of the original folder structure, Prelude will report it cannot write metadata to the file. You can transcode the *.MTS to another format and then add metadata.
    We are looking at future solution for what we call "naked MTS file", but unfortunately that is not part of the currently released product version.
    Michael

  • I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    I am trying to download xfinity tv go app. I can not find it in my App Store and can not download it from the comcast website. All I get is a blank screen in the App Store. My Apple ID is associated with a Canadian address. How can I find the app?

    Its possible the App is not available in the Canadian store if the link doesn't work for you.
    https://itunes.apple.com/us/app/xfinity-connect/id320788270?mt=8

  • "Policytool" can not be invoked from the command line

    Hello Everyone. I tried to use Policytool to generate a java policy file, however I can not start it from the command line. Could somebody here let me know it there is any trick there? Thanks in advance!
    Kuilian

    try this
    java -Djava.security.policy=<"your policy file"> <your file to run>
    srikanth.n

Maybe you are looking for

  • Not able to access ACS 5.1.0.44

                       Hi I have two ACS appliance ver 5.1.0.44. I configured with replication and it was working fine. Last month my primary was down and not able to access but able to ping. I tried and Google it in Internet I couldn't find any answer t

  • Can't see phone memory capacity status

    I changed my Nokia 3500c mobile security code from default 12345 to a new one. Then I set phone's security level to memory. After restarting the phone I changed phone security level to phone. Then I tried to see the status of my phone contacts/addres

  • Email messages not available on server - N900

    I setup gmail on my N900 but cannot read the messages. An error message reads that "message could not be found on server". Pliz assist

  • Adobe 10 support

    In search of information for extended support for Adobe 10. Number of license, cost and duration of support.

  • NEED HELP registering QuickTime 1 Pro for Windows

    Let me start off by saying that I'm a total novice when it comes to computers & my new iPod. I have Windows XP and I believe I've downloaded Quick Time bla bla bla and have already purchased QT7Pro ($32.31). I have received my email confirmation alon