I installed iTunes 10.5.3.3 and now my DVD player won't work.

I installed iTunes 10.5.3.3 and now my DVD player won't work and has this error:
This device cannot start. (Code 10)
Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.
Any ideas why iTunes renders my DVD drive unusable?  I have uninstalled and reinstalled iTunes and when reinstalling I had my device manager open and saw during the installation how my DVD player went from accessible to not being able to start.
Why is this happening? 
Here is my computer information:
Dell
Latitude D630
Intel Core  Duo CPU T770 @2.40 Hz
4.00 GB RAM
32-bit Operating System
Thank you,
Kelly

There's a few different possibilities with a code 10, Kelly. To narrow in on the likeliest culprits it would help to have a closer look at your system.
Could you post your diagnostics for us please?
In iTunes, go "Help > Run Diagnostics". Uncheck the boxes other than DVD/CD tests, as per the following screenshot:
... and click "Next".
When you get through to the final screen:
... click the "Copy to Clipboard" button and paste the diagnostics into a reply here.

Similar Messages

  • Installed itunes 6 and now CD/DVD drive won't work at all

    I just bought a new ipod and installed the software and now my CD/DVD drive won't work at all. Here is my info: Could someone please help!!!
    Microsoft Windows XP Professional Service Pack 2 (Build 2600)
    Dell Computer Corporation Inspiron 5160
    iTunes 6.0.4.2
    CD Driver 2.0.4.3
    CD Driver DLL 2.0.3.2
    LowerFilters: ASAPIW2K (6.0.2.0),
    UpperFilters: GEARAspiWDM (2.0.4.3),
    Video Driver: NVIDIA GeForce FX Go5200 \GeForce FX Go5200
    IDE\DiskFUJITSUMHT2080AH_______________________006C___, Bus Type ATA, Bus Address [0,0]
    IDE\CdRomSONYDVD+-RW_DW-D56A____________________PDS7___, Bus Type ATA, Bus Address [0,0]
    SCSI\CdRomROXIO__DVD-ROM_EMULATOR___, Bus Type SCSI, Bus Address [0,0]
    If you have multiple drives on the same IDE or SCSI bus, these drives may interfere with each other.
    Some computers need an update to the ATA or IDE bus driver, or Intel chipset. If iTunes has problems recognizing CDs or hanging or crashing while importing or burning CDs, check the support site for the manufacturer of your computer or motherboard.
    Current user is administrator.
    D: SONY DVD+-RW DW-D56A, Rev PDS7
    Drive is empty.
    E: ROXIO DVD-ROM EMULATOR, Rev
    Drive is empty.
    If anyone has a solution for this stupid problem that would be great.
    Thanks

    Yes, I suspect that it's the virtual drive emulator software you have there. I know nothing about that software and it doesn't look like the Roxio support page even mentions it, so it's probably software old enough that they're not supporting it anymore.
    To uninstall any software, I would start with the "Add and Remove Programs" Control Panel. Uninstall it there, and then use the Microsoft Installer Cleanup Utility —
    http://support.microsoft.com/default.aspx?kbid=290301
    Download and install that. Run it and find the drive emulator software on the list and remove it there. And reboot and see if that has successfully removed it.
    There is a work around that if we just remove the iTunes CD driver, you'll probably get your drive back, but you'll only be able to rip CDs, you won't be able to burn them without the iTunes CD driver installed. You do have some Pinnacle CD burning software installed. Are you currently using that or is that leftover cruft as well?

  • TS3212 I install iTunes on a new computer and now I have nothing  no music,apps nothing. HELP

    I install iTunes on a new computer and now I have nothing no music, apps NOTHING! HELP

    See Recover your iTunes library from your iPod or iOS device.
    tt2

  • Had to purchase two OS X system upgrades, new iPhoto etc. just to connect new iPhone 5 and now half my apps won't work. No rosetta and missing lost dogs pics from iCloud...HELP!

    I had to purchase two OS X system upgrades, snow leopard and mountain lion,  just to connect my new iPhone 5 and somewhere between uploading iPhone 4S pics to iCloud some important pics disappeared then installed new iTunes and purchased new iPhoto all  just to connect new iPhone 5 and now half my apps won't work. No Rosetta to make apps work but its not as simple as upgrading apps and missing lost dogs pics from iCloud...HELP!

    File a complaint with Apple for not giving adequate warning before upgrading OS X that it would render PPC programs dead.
    That someone at Apple said requiring the iPhone 5 to have 10.8 (10.6.8 is the minimum actually) and in order to remain a loyal Apple customer they need to fix this mess and revert your machine and software back to 10.6.8
    You see, 10.6.8 would have ran your iPhone 5 and ran your PPC based software, so whoever told you to upgrade to 10.8 was wrong and they need to fix your machine.
    It can be reverted to 10.6.8 yourself.
    How to revert your Mac to Snow Leopard
    Most commonly used backup methods

  • Installed Adobe Photoshop CS6 on MacBook Pro OS 10.7.5, now my DVD player does not work. Ideas?

    I installed Adobe Photoshop CS6 on MacBook Pro, OS 10.7.5. Now my DVD player will not work. Any ideas?

    Problem solved. Yes, it was a coincidence. The problem had to do with my DVD preferences, not the Adobe installation. Thanks for your reply.

  • I update to os x 10.9.3 and now my dvd player app says it's not supported

    I updated to os x 10.9.3 mavericks and now my dvd player app says it can't be used with os x 10.9.3(and the dvd player is 5.4,and can't find update in app store)
    What to do?

    sorry i didn't think to look because i had it on the desktop, but your right.
    Thank's for the help,i really appriciate it.

  • HT2486 I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

    I just upgraded to 10.6.3 and now my address book won't work (4.1.2) how to I upgrade it?

    Software Update (under the Apple menu).
    Current Snow Leopard version is 10.6.8.

  • I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly.  please help.

    I upgrades my mac operating system to OSX 10.9.4 and now my Dreamweaver CS5 won't work, it just quits unexpectedly.  Please help.

    Remove preferences on Mac OS
    Quit Dreamweaver.
    In the Finder, navigate to /Users/Your User Name/Library/Application Support/Adobe.
    Rename the Dreamweaver preferences folder:
    Dreamweaver CS5: Rename the Dreamweaver CS5 folder to, for example, Old Dreamweaver CS5.
    Navigate to /Users/Your User Name/Library/Preferences.
    Rename the Dreamweaver preferences file:
    Dreamweaver CS5: Rename the Adobe Dreamweaver CS5 Prefs file to, for example, Old Adobe Dreamweaver CS5 Prefs.
    Try to re-create problem
    After you have removed your existing preferences, restart Dreamweaver. The application creates new preferences files, folders, and registry entries, as applicable, using the default settings.
    Then try to re-create the problem that you had before.
    If the problem was resolved, then damaged preferences was the cause.
    If the problem persists, then the preferences are not the cause and you can replace the original preferences.
    To replace the original preferences:
    Quit dreamweaver.
    Delete the new preferences folder and restore the original name of the previous folder.

  • I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    I recently upgraded my Macbook Pro with OS X and now my HP printer won't work. Can anyone help?

    Visit HP's support site to see about downloading an updated driver. Or you can check at support.apple.com/downloads/ for new HP printer drivers package.

  • I updated iTunes to 11.1.4 and now my iPhone 4S won't show up in iTunes.

    I updated iTunes on my laptop to 11.1.4 and now my iPhone 4S won't show up in iTunes.  I have WIndows 8.  My iPhone shows up there, just not in iTUnes as a device.

    https://discussions.apple.com/message/24636376#24636376
    gck55
    Jan 25, 2014 6:00 AM (in response to rcpalladino)
    Windows 8.1, 64bit
    It appears that the 64bit install messed up the device drivers for the Apple mobilie devices connecting as USB.
    I tried many things, I may have missed a step below.  But the following is what I believe was the fix - since it worked on a 2nd PC.
    Make sure you are using an administrator account.  Any of them on your machine will do for the following
    a) Get Windows to restart the drivers:
        - disconnect your USB device and close ITunes
        - connect your USB device
        - if ITunes loads, close it.
    b) File explorer:
    Open File explorer and browse to
    C:\Program Files\Common Files\Apple\Mobile Device Support\Drivers
    In that folder there should be a set of files named "usbaapl64...."
    right click on the one ending in "INF"
    Select Install.  It's very quick.
    remove the USB device
    c) Restart the computer.
    When you login again, load ITunes before you attach your USB device.

  • I upgraded my os of itunes and now my ipod touch won't work

    I upgraded the itunes to the newest os 5.0 and now my ipod touch won't register or even turn on, I get the initial screen that shows you to plug it in to the computer and then nothing happens

    i have the same problem. I tried to upgrade this morning to iOS 5.0.1 and now my ipod touch is completely frozen. All I get is a black screen with the Apple logo and an empty download bar. I'm not even able to turn off the ipod and iTunes doesn't detect it anymore. Any suggestion except returning the ipod to Apple Store?

  • I installed Tiger and now my printer/scanner won't work

    Hi. I installed Tiger and now my multi function printer/scanner/fax is not recognized by my computer. I have the Brother MFC 420 CN. I downloaded some drivers and such which I thought would resolve the issue, but still it does not work. What can I do? Thank you.

    According to this page:
    http://www.brother.com/E-ftp/macosxstate.htm
    The MFC-420 CN is not listed. Sounds like you have a printer whose driver never was updated. Contact Brother technical support and ask them to fix that issue.

  • Pavilion m7570n, INSTALLED WINDOWS 7 and now my DVD/CD is not working

    Computer: Pavilion m7570n
    product name for the DVD/CD drive: HL-DT-ST DVDRRW GSA-H20L ATA
    Converted computer from Windows XP to Windows 7
    In device manager, I have a yellow explanation mark next to my dvd burner and dvd player.  I've tried all the reinstalling and updating driver options.  It comes back that the drivers are up to date.  I can not see the the drives on "my computer."  Any recommendations

    This is usually  a known software conflict and happens across the board will all computer manufacturers due to a issue with multiple media burning/ripping applications being installed on your system.
    You can either run this file, go online to Microsoft's site for a fix, or manually fix it by following the instructions below:
    Manually delete the registry entries
    Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
    322756  (http://support.microsoft.com/kb/322756/ ) How to back up and restore the registry in Windows
    Note Before you use this method, uninstall all CD or DVD writing or recording programs. Deleting the corrupted registry entries might cause problems with any other CD or DVD writing or recording programs that are installed on your computer. Uninstalling these programs before you start will help you avoid any problems that removing the registry entries might cause. You can reinstall these programs after the problem is resolved.
    This method provides step-by-step instructions for how to use Registry Editor to delete the following corrupted Registry entries:
    UpperFilters
    LowerFilters
    Step 1: Start Registry EditorStart Registry Editor
    Start Registry Editor...type "regedit" into the run box on the start menu.
    Step 2: Delete the UpperFilters registry entry
    In Registry Editor, expand My Computer, and then expand HKEY_LOCAL_MACHINE.
    Expand SYSTEM, and then expand CurrentControlSet.
    Expand Control, and then expand Class.
    Under Class, click {4D36E965-E325-11CE-BFC1-08002BE10318}.
    In the details pane of Registry Editor, on the right side, click UpperFilters.
    Note You may also see an UpperFilters.bak registry entry. You do not have to remove that entry. Click UpperFilters only.
    If you see the UpperFilters registry entry in the details pane of Registry Editor, go to step 6.
    If you do not see the UpperFilters registry entry, you still might have to remove the LowerFilters registry entry. To do this, go to "Step 3: Delete the LowerFilters registry entry."
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?
    Step 3: Delete the LowerFilters registry entry
    In the details pane of Registry Editor, on the right side, click LowerFilters.
    Note You might see a LowerFilters.bak registry entry. You do not have to remove that entry. Click LowerFilters only.
    If you do not see the LowerFilters registry entry, unfortunately this content is unable to help you any more. Go to the "Next Steps" section for information about how you can find more solutions or more help on the Microsoft Web site.
    On the Edit menu, click Delete.
    Click Yes when you receive the following message:Are you sure you want to delete this value?The LowerFilters registry entry is removed.
    Exit Registry Editor.
    Step 4: Restart your computer
    Restart your computer. After you have done this, try to access the CD or DVD drive. If you can access the CD or DVD drive, and if you do not receive an error message, the problem is resolved. You can reinstall your CD or DVD writing or recording software.

  • I just installed iOS 6.1.5 and now my power button won't work

    After installing iOS 6.1.5 and reinstalling the apps that it deleted from my computer my power button won't work on my iPod touch 4th gen.  Any suggestions?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Tried to install yosimete software and now my MAC Pro won't work

    Yosimete software won't install

    Yes I was upgrading from 10.6 to 10.10.
    Says OS X could not be installed on your computer.
    File system verify or repair failed.
    Quit the installer to restart your computer and try again.
    I did all that a couple of times and still won't work.

Maybe you are looking for