I installed Snow Leopard and now I can't import pictures from iphone or memory chip.

I installed Snow Leopard to my Mac Book Pro and when I went to import pictures from my Iphone 4 to the Mac I received a message that it could not read the files.  I also tried importing pictures from my camera's memory card and got the same error.  This hadn't happened before the installation of Snow Leopard, what could it be?

update SnowLeopard to its latest version, v 10.6.8, and alongside that also your iTunes to v10.5
Use disk utility to repair the OS permissions after all updates are in place.

Similar Messages

  • I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?

    I just installed snow leopard and now my itunes won't recognize my iphone. how do i fix this?

    http://support.apple.com/kb/TS1591
    You may have to remove & reinstall the AMDS, as described in that support article.

  • Help please! I have just installed Snow Leopard and now I can't access my gmail account. I can complete the sign in boxes ok but the blue indicator bar freezes and prevents access to my emails.

    I have just installed Snow Leopard, (10.6.3) onto my Macbook Pro and so far it seems to be working fine except that I can't access my gmail account. I can sign in but the blue opening indicator freezes near the end and I can get no further. I'm a bit of a novice at this stuff - help please!

    I would run the combo update to get to 10.6.8 in order to get the latest security updates and so forth. Then run Software Update until you system is current.
    10.6.8 Combo Updater
    G-mail problem.
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    IMAP or POP setup?

  • I installed snow leopard and now videos on my Xfinity home page won't play

    I installed snow leopard and now videos on my Xfinity home page won't play

    You may be in the same boat as me.
    I deliberately bought a refurb Feb 2011 MacBook Pro, because it would have originally shipped with Snow Leopard. I have to run an application for my job, which does not run under Lion.
    Unfortunately, Apple is now upgrading all Snow Leopard machines, before selling them as refurbs. I purchased a legal copy of Snow Leopard, and have tried various downgrade solutions that I found posted on the net, without success. No matter what I do, it always goes into "three beep mode" after trying to install Snow Leopard.
    The latest development came this evening, while I was talking to the "geniuses" at Apple. Apparently, there is now a firmware revision that loads the first time you run Software Update under Lion, and it locks the machine so that it can't revert to Snow Leopard.
    The only option they have been able to offer me so far, is to return the machine and get a refund. This is maddening, as I HAVE to have a Snow Leopard machine, and can't find any other way to purchase one.

  • I've installed snow leopard and now my MX860 won't scan

    I've recently installed snow leopard and now my Canon MX860 won't scan.  I've reinstalled the scan driver from the Canon website.  Any other ideas?

    I suggest that you open Print & Fax, select the MX860 under the scanner heading and remove it using the minus button. Then, still in Print & Fax, click the plus button to add the scanner again. The Add Printer browser will appear and with the Default icon selected the MX860 should appear as a printer and a scanner. Select the scanner entry and ensure the Print Using menu changes to Canon MX860 series. Click Add to complete the creation of the new scanner queue. Now test the new scanner by selecting it in the Print & Fax > Scanners list and then pressing Open Scanner.

  • I recently updated my iphone software and now I can't upload photos from iphone to mac computer. Help please.

    I recently updated my iphone software and now I can't upload photos from iphone to mac computer. Help please.

    The following link has 2 methods for importing photos to a Mac (not counting Photo Stream). Are you using iPhoto or Image Capture? If you follow the steps in the link for that method, what exactly happens that doesn't allow the upload? iOS: Import personal photos and videos from iOS devices to your computer

  • Can't import pictures from iphone 5

    I can't import pictures from my iphone 5 even though they are stored on my computer. I get the message "nothing has been imported. The file(s) selected to import did not contain any supported file types, or the files are already in this catalog."  I've been able to do it until this time.  Any ideas?

    1. make sure phone is not locked (passcode locked) when you connect.
    2. odds are you (or somebody) changed a setting in windows to not pull up that window anymore by default.
    3. after plugging in, go to My Computer and you should see it listed as a camera/scanner. Just go double click it and get into the pictures and copy off manually. Right click it and I think there you can tell Windows how to act when plugged in.

  • I have installed snow leopard and now can't watch BBC or ITV iplayers. Any help?

    Can anyone tell me how I can watch BBC/ITV iplayers now that I have installed Snow Leopard?
    Thanks
    Lucia

    Depending how you did the installation, you may still have Flash, but it will need updating to the latest version (not least for security reasons).
    http://get.adobe.com/flashplayer/

  • Installed snow leopard and now all red colors look rusty orange.

    All I did was install snow leopard on my mac pro and now all reds will shift to orange on one display and pink on my other. I've been using the exact same setup with just leopard and didn't have this problem so I am assuming it has definitely something to do with snow leopard. Anyone else have this problem? I've calibrated to the best of my abilities but it's still present. I can actually still see reds on say, a thumnail, but as soon as I enlarge the picture it will change color. I've looked on forums and have not found a solution.
    Thanks!

    Try printing the PDF with Adobe Reader
    <http://get.adobe.com/reader/?promoid=BUIGO>

  • Installed snow leopard and now my hp wireless all-in-one 4500 won't connect

    I installed snow leopard on my macbook and increased the RAM and now I can't come up with the right driver to reconnect my HP officejet 4500 wireless all in one

    Try downloding the drivre here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4082&lc=en&cc=us&dlc=en&s w_lang=&product=5304877
    also make sure you done all the software updates after the install SL especially the following:
    http://support.apple.com/kb/DL1399

  • I installed "Snow Leopard" and now, "AppleWorks 6" is LOST FOREVER!......

    Yes, I know that its an old Word Processor, but I didn't use it that often, and when I did,
    it was good enough for my purposes.
    So, when I installed the new "Snow Leopard", I found that it stopped AppleWorks 6 from functioning!...
    I called "AppleCare" which I'm a member of, and they told me that I was out of luck. I had PAID for this program and Apple just decides not to make it compatible with Snow Leopard!..
    So, I"m now looking for a FREE word processing program. I hope Version Tracker will have something.
    Does anyone have any suggestions? PLease help!....thanks....

    Okay, I'll do my best to go into more detail...
    I"m using an iMac. And, I was also using "APPLEWORKS 6.2.9 wordprocessor program. Everything was going well until I decided to upgrade my OS to "Snow Leopard"... that was when Appleworks 6.2.9 stopped working!.
    I then telephoned" AppleCare", which I am a member and they tried to help. they walked me thru installing "Rosetta" (a fix?)......and that didn't help at all!..I still could not use Appleworks 6.2.9. The Apple rep then told me that AppleWorks 6.2.9 could not ever be used with "SnowLeopard".
    I had originally purchased AppleWorks in 2002 and had paid $84.34 (with tax). I have the original bill from Apple from whom I bought it from.
    Now, I hope that this explains my problem. This has been a "learning experience" for me. I had no idea that when I decided to upgrade to "Snow Leopard" that it would DELETE my older word processor that I was happy with.
    I always keep my iMac up to date. Right now its version 10.6.1. And, I keep it current with "Software Update"..
    So, if anyone can tell me how to get my older AppleWorks 6.2.9 back, I'd surely appreciate it!..
    And, yes again, I did install "Rosetta", but it did no good.
    On a final note: What Apple did is remove a program that I had paid for without my knowledge!.
    And, they now want me to pay $79.00 should I want their "iWork" word processor program.
    No matter how you look at this....Apple robbed me!... if I wanted to keep a seven year old AppleWorks program in my computer, Apple had no right to remove it!...(at least ask!)...
    So, what would you call that?...
    Thanks..

  • Just upgraded from snow leopard to maverick.  Can't access pictures from iPhoto now.

    Suggestions?

    No suggestions until you explain what "can't access pictures from iPhoto now"... means, or even looks like.
    There are 9 different versions of iPhoto and they run on 9 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Include things like:
    - What version of iPhoto.
    - What version of the Operating System.
    - Details. As full a description of the problem as you can. For example, if you have a problem with exporting, then explain by describing how you are trying to export, and so on.
    - History: Is this going on long? Has anything been installed or deleted? - Are there error messages?
    - What steps have you tried already to solve the issue.
    - Anything unusual about your set up? Or how you use iPhoto?
    Anything else you can think of that might help someone understand the problem you have.

  • Upgraded to Snow Leopard and now I can't back up

    Recently I upgraded to Snow Leopard after my hard drive crashed in my MacPro. I had the hard drive replaced and then imported the old information to the new one via Time Machine. All went well. I have been backing up on a Lacie 160 GB external hard drive for years, and like it's designed to, when it's full, the older backups got deleted to make way for new ones.
    Now when I try to back up to the Lacie since the upgrade and the installation of the new internal drive, I get error messages that tell me the device is too full, and I cannot back up.
    Does anyone know how I would go about solving this? My thought it that by deleting all of the old backups on my Lacie, I would then free up enough space for Tim Machine to start working like normal again. But I do not want to do this until I talk with people more experienced than I about the advisability of this action. Any advice?

    Hi, and welcome to the forums.
    See #C4 in Time Machine - Troubleshooting (or use the link in *User Tips* at the top of this forum).

  • Can't import pictures from iphone

    Hi,
    When i plug my iphone in to sync with my pc i used to get a pop up box in the right hand corner that would ask if i wanted to import and tag my pictures from my iphone. This box has disappeared and I can't work out how to sync my photo's from my iphone to my pc. I've tried the usual rebooting stuff but still can't work it out. Any thoughts? Am i missing something in settings that automatically downloads photo's from iphone when it's connected to PC?

    1. make sure phone is not locked (passcode locked) when you connect.
    2. odds are you (or somebody) changed a setting in windows to not pull up that window anymore by default.
    3. after plugging in, go to My Computer and you should see it listed as a camera/scanner. Just go double click it and get into the pictures and copy off manually. Right click it and I think there you can tell Windows how to act when plugged in.

  • I reinstalled my Snow Leopard and now I can't retrieve my saved passwords.

    The save passwords option is no longer present in my toolbar. My old saved passwords are not there in Firefox preferences. Nothing I can find on the help site seems to help, including live chat. I did find the two files Firefox says are connected to saved passwords in the material I back-up before I re-installed my operating system. I dragged them to the corresponding location on my new hard drive, and that didn't do anything.

    You need to update to Safari 5.1
    Safari 5.0.6 is for Leopard v10.5.8, see system requirements here > Safari 5.0.6

Maybe you are looking for

  • Problems with charts after upgrading APEX from 3.2 to 4.1

    After upgrading apex from 3.2 to 4.1 the combination stacked bar/Stepline charts no longer works. Any help would be appreciated. Thanks.

  • Enumerated Out-Of-Range Detection

    I'd like to solicit opinions and ideas on a LabVIEW technical issue. The objective is to have a subvi detect when it receives an out of range value on an input that is an enumerated type control. Of course one way is to change the enumerated type so

  • Delete/Edit/Update CFL Conditions - Choose From List

    Hi All, I have a Choose From List of which the conditions are set depending on a ComboBox.Selected.Value oCon.CondVal = comboboxBranch.Selected.Value So the Conditions are set when the "OnAfterComboSelect" event is trigered.            How do I reset

  • Macbook Pro way too loud when headphones plugged

    Hi I've always had this problem, when I plug in any type of headphones, I must lower the volume to one - max two - "blocs" of volume, otherwise my head explodes. I unplug them, and I have normal volume range with the external speakers. Anyone has tha

  • Changing video format

    This may be a really stupid question, but, is there any way you can change the format of a recorded video from your iphone, or rotate it, when it's transferred to your laptop? I recorded a video holding the phone vertically, and when I transferred th