I installed viber on my iPhone 5s. After entering my number, it says:" No Service It seems to be a problem connecting to viber's service.please check your connection and try again" Nevertheless I have connected to the internet. Could you please help me?

I installed viber on my iPhone 5s. After entering my number, it says:"
No Service
It seems to be a problem connecting to viber's service.please check your connection and try again"
Nevertheless I have connected to the internet.
Could you please help me?

Hello!
Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

Similar Messages

  • TS1702 After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me a message (could not sign in. Please check your network and try again).  Please help!!!

    After changing my phone number on iPhone, my iPad will not connect to my iMessage or FaceTime. Keeps giving me this message (Could not sign in. Please check your network and try again).  Please help!!!

    iPhone 4 and iPod touch (4th generation): Using FaceTime
    http://support.apple.com/kb/HT4319
    iPhone 4 and iPod touch (4th generation): Using FaceTime behind a firewall
    http://support.apple.com/kb/HT4245

  • My apple tv gives a msg " there was a problem connecting to the network " check your settings and try again (5) - sometimes it comes with the number 3905 - i have tried all the suggestions from reset, restart, to switching and unplugging everything -

    I was trying to download a movie and then it said there was a problem connecting to the network , check your settings and try again (5) . I tried all the various suggestions already in the discussions including restore, restart, unplugging everything etc - still doesnt work. Any other new ideas? I bought my apple tv just a few days ago and am really annoyed its already run into problems

    Reboot router, make sure it's up to date. If on wifi try ethernet. Make sure DNS is set to automatic (settings - general - network).

  • Trying to Hot Sync Visor Pro with Windows 7 (64 bit OS) - getting error: "The connection between your handheld computer and the destktop could not be establishe​d. Please check your setup and try again."

    Hi.
    I read the posting regarding the options on Hotsyncing for Windows 7; however, I have some questions as I have a 64-bit system.
    I have a Visor Pro that I'm trying to Sync up with my new laptop which is running Windows 7.
    Steps I have taken:
    * installed the Visor Palm Desktop 3.0.1 that came with the Visor (which the installation went well)
    * The issue arises when I push the "Sync" button on the cradle and the following error message appears "The connection between your handheld computer and the destktop could not be established.  Please check your setup and try again."
    Since I have a 64-bit OS it appears that I have 2 options: 1) bluetooth or 2) Infrared.
    I have to admit I don't know know how to do either of these (how can I tell if this Handspring Visor Pro has bluetooth (which I don't it does)?). 
    Then how about the Infrared option?  I see on the PDA it has a red area that one can "beam" info.  Is this the same as Infrared or my 2nd option?
    I love my Visor and want to continue using it, but need to backup the valuable info!
    Any help with this would be greatly appreciated!
    THANKS!!!!!
    Post relates to: Visor Pro

    Hello lwalbring and welcome to the Palm forums.
    Your Visor, as you suspect, does not have Bluetooth, so you must use the IR HotSync option.  Since you are using Windows 7 64-bit, I believe that you are going to have to upgrade to Palm Desktop 6.2.2 to make things work from an OS/Driver perspective.
    Since you are using such an old device, you are also going to have to download and install the PalmHotSyncSetup Utility from Pimlico.  This update turns on support for old Palm OS PDAs in Palm Desktop 6.2.2.  Without the update, you won't be able to sync your Visor with Palm Desktop 6.2.2.  The software is free and the link is all the way at the bottom of the screen.
    Lastly, if your PC doesn't have an IR port on it, you will need to purchase a USB to IR adapter.  Some laptops still have IR ports and most desktops don't.
    Once you have all the pieces, you'll want to go back to the Windows 7 and Vista HotSync thread again, and follow the directions for setting up and configuring IR HotSyncs.
    Alan G

  • "USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

    Hi,
    I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past.  Thank you board members! 
    Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago.  There have been no changes (I know of) to the configuration, but now I receive  "The connection between your device and the desktop could not be established.  Please check your setup and try again."  On the laptop I sometimes get  "USB device not recognized."  I am unclear why I get the PC message sometimes and not others.   
    I have tried the following: (not necc exactly in this order)
    Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
    Reset the Palm (multiple times)
    Rebooted the laptop  (multiple times before and after the Palm resets)
    Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
    and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409) 
    Followed the steps in "Start Here" found at  http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057 
    Moved Backup directory as per a post on this forum
    Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
    Followed the steps in HotSync troubleshooter guide you can run through located on
    http://kb.palm.com
    Went into Device Manager - found it shows no yellow ! 's
    Followed Device Mgr Troubleshooter - went all the way thru with no solution 
    Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue.    ...? 
    Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
    Read all the posts under "USB device not recognized." 
    OK, I'm at a loss, can anyone help me?  Many thanks in advance! 
    ~Bob
    Post relates to: Tungsten E2

    Hello!
    Using a cradle with the Tungsten E2?  Tried bypassing the cradle and just use the hotsync cable?  Tried a different computer yet?  Somehow, the PC is having problems getting a signal from the device.  I assume you have the laptop charger plugged into the laptop during this?  Not going through a docking station or port-replicator.
    One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop.  This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time.  Keep me posted.
    Post relates to: Treo 650 (Unlocked GSM)

  • When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

    When i want to ask the guaranty status of my apple wireless keyboard, i got an error: apple keyboard We're sorry, but this serial number is not valid. Please check your information and try again.

    If you purchased the iPhone from Apple or an authorized Apple reseller,
    contact them for assistance. If you purchased elsewhere, go back
    to that retailer and get them to give you a new iPhone or your money
    back.
    If you have checked the serial number carefully and re-entered it
    and that gave you the same error message, contact Apple if purchased
    from Apple or authorized retailer; otherwise you have been scammed
    and need to pursue the matter with the business you obtained the
    iPhone from.

  • I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.

    I'm trying to update to CC (2014) and keep getting this message: "Installation Failed. Installation encountered an error. Please restart your system and try again. (15) I've done the restart, same problem.
    Help!

    Hi stijill2,
    In case you are facing issues uninstalling the app's then please try manual cleanup of Adobe from your machine by following the below mentioned steps:
    1. Navigate to Applications and trash all Adobe app's and Adobe folder.
    2. Navigate to Applications/Utilities/ and trash Adobe Application Manager,Adobe Creative Cloud, Adobe Installer folder.
    3. Go to Library/Application Support and trash Adobe.
    4.Go to ~/Library/Application Support and trash Adobe.
    Try installing the CC app's and let us know if still the error persists.
    Regards,
    Romit Sinha

  • FaceTime on my mac won't connect , I get this message every time i try to connect " please check your network and try again " my network works fine with everything please help me

    Hi
    I have MacBook Air , yesterday I tried to use FaceTime but it won't even connect I keep getting this message " please check your network and try again later " my network work perfectly with everything . however FaceTime  works on my iPad . can someone please help me with this problem .
    thank you

    FaceTime, Game Center, Messages: Troubleshooting sign in issues

  • Your address was not recognized. Please check your entry and try again.

    I'm trying to register for the free 30 day trial.
    I get
    "Your address was not recognized. Please check your entry and try again."
    My address works fine for the postman, deliveries etc. Another case of a programmer who knows better!
    What are the address requirements on the sign-up form, so I can proceed?
    Pete

    Hi
    Which product do you want to register for? Office 365, SharePoint or Office 2013?
    Since this forum is to discuss problems of Office development such as VBA, VSTO, Apps for Office, and your question is related to the free trial registering of Microsoft products, I suggest you posting it in Answers
    Forum for more efficient responses.
    Thanks.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Imessage and FaceTime says "waiting to activate"  I've tried many times it keeps saying can't activate please check your network and try again. Getting frustrated advice?

    IMessage and FaceTime saying "waiting for activation.." I've tried many times and it still says "can't activate check your network and try again later" please help.

    Hi, Amandacrossley.
    Here is the best article to reference when experiencing issues with iMessage and FaceTime activation issues. 
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Regards,
    Jason H. 

  • Re: "USB device not recognized​." "The connection between your device and the desktop could not be establishe​d. Please check your setup and try again." Tungsten E2

    Have had my Tungsten E2 for 3 years...I always use cable to Hotsync, and the last few weeks it has worked only intermittently. Either the device is not recognized, or it starts the HotSync and then freezes.  I have checked out various online suggestions but then discovered that the only thing that seems to  work is to exit Hot Sync Manager, then restart it again each time - then Hot Sync seems to work fine - a temporary solution! I don't have Bluetooth capabilities.  I can't figure out if I need a new cable, a new OS (have Vista), a new laptop (only 2 years old) or a new Palm!  Any suggestions? Thanks!
    Post relates to: Tungsten E2

    Hello!
    The next time that happens, USB device not recognized error, unplug the cable from the PDA and pc, then soft reset the device, then plug the PDA back in and see wat happens. 
    Post relates to: Treo 650 (Unlocked GSM)

  • Facetime Could not sign in. Please check your network and try again.

    Hi,
    I am using IPad Mini and was able to use Facetime without any issue. All of a sudden I started getting this error. My Apple ID is verified and though I go back into facetime through settings and re-enter my user-id and password, it does not work at all.
    I also noticed that my IOS is updated to 7.1 through automatic update. I think the update has affected the settings. I am able to use other apps that connect to network without any issues, but facing this issue with facetime.
    Any suggestions would be of great help!
    Thanks
    KV

    It may not be an issue at your end.
    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Unfortunately, we may have to wait until Apple is more forthcoming with information.
    http://www.apple.com/support/systemstatus/

  • Error Occured. Please check your settings and try again while opening a RTF

    Hi,
    I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please.
    Thanks
    Aravind

    Can you throw in more detail? I mean exact step step by process that you folowed.
    Thanks, Naveen Gagadam.

  • After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

    After installed mavericks i cannot sign in to my facetime and i messages. i tried it 100 times, but it is showing couldn't sign in check your network and try again. there is no problem with my network. if anyone knows the solution please help me .

    Hi,
    What version of the OS did you upgrade from ?
    Anything before OS X 10.8.2 may have an issue if the Logic/Mother board has been replaced and the Serial Number not "flashed" back to it.
    In the Apple Icon menu use the About this Mac item.
    In the new panel click twice on the line that tells you the current OS level
    It will change to the Build number (and alternative count to the OS versions) and then the Serial Number.
    If it is missing you need to get it replaced.
    (It is supposed to be done on Repair or Refurbishment).
    An Apple Store or Apple Authorised Service Provider as the best choices.
    There are apps you can download (They are Mac Model specific) but needs careful typing as it is a once only trip.
    8:56 pm      Sunday; November 24, 2013
      iMac 2.5Ghz 5i 2011 (Mavericks 10.9)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    Message was edited by: Ralph Johns (UK)

  • Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later.

    Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download.  Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network.  What gives?

    Try disabling your firewall; both on your PC and the external Firewall/Router.

Maybe you are looking for

  • Windows 8 and Canvio Desk 3TB: System will not boot when external hdd is connected

    http://h30434.www3.hp.com/t5/Desktop-Operating-Systems-e-g/HP-PAVILION-A6109N-amp-windows-8-System-w... Hi, just recently upgraded to Win Pro on my HP PAVILION A6109N.  I also bought a toshiba canvio desk 3TB.  What I notice is that if I reboot my pc

  • Possible to place subtitles beneath the image with 16:9?

    Hi everybody, I couldn't find away to put subtitles beneath the image with 16:9 like it would be possible with such a video in FCP: having the 16:9 video in a 4:3 image, placing the subtitle in the black under the image - the issue with FCP is that l

  • MailTips for Dynamic Distribution Lists - wrong number of recipients

    We use Exchange 2013 and Outlook 2013. We have a Dynamic Distribution List ([email protected]) configured on Exchange. It contains 75 users, I confirmed it using below cmdlets in Exchange management shell $all = Get-DynamicDistributionGroup [email pr

  • Color sorting songs/playlists for library???

    Is there an option, widget, or something I could use to keep track of what songs in my music library are listed on which play lists. Something along the lines of gmail and its colored lables. The round about way I have to update my iTunes music libra

  • AD -vs- LDAP for external Identity store in ACS

    Is there a difference in using AD versus LDAP in a Windows environment for an Identity Store? We are in the process of setting up the ACS 90 eval and I noticed you can setup either AD or LDAP or both as an external identity store. Are there advantage