I just began month trial of cs6 & cannot open raw files from nikon 600?

I just began month trial of cs6 & cannot open raw files from nikon 600?

Have you updated your Photoshop to get the latest Camera Raw update patch?  If not go to:
Help >> Updates
This should get you the necessary updates for your camera assuming it is not "too recent".
Good luck and post back.

Similar Messages

  • LR4.4: Cannot open Raw files from Olympus OM-D E-M1 [was:Adobe lightroom.]

    Just bought a new cámara olympus OM E-1 and find that I can not download my fotos with
    Lightroom 4.4. Lightroom does not accept the format ORF. any help please!

    Thanks John you have been a great help! I will see what suits me best!
    Enviado desde mi iPad margaret.
    El 09/11/2013, a las 07:33, John Waller <[email protected]> escribió:
    Re: LR4.4: Cannot open Raw files from Olympus OM E-1 was:Adobe lightroom.
    created by John Waller in Photoshop Lightroom - View the full discussion
    DNG Converter.
    Read all about it here
    http://www.adobe.com/products/photoshop/extend.displayTab2.html
    It's a way of opening the Raw files from your OM-D EM-1 without having to upgrade to LR5.
    In short, you open the Raw files from the camera uing the DNG converter, convert the Raw files to DNGs. Then you edit the DNG files in LR4.4.
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5828160#5828160
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5828160#5828160
    To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5828160#5828160. In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Lightroom at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Cannot download RAW files from Nikon D800E into CC Photoshop?

    Cannot download RAW files from Nikon D800E into CC Photoshop?

    This is not the same question you posted earlier:
    "I am having difficulty transferring D800E NEF files into Adobe RAW format to use in Photoshop CC? What to do?"
    Perhaps give steps you are trying.

  • Photoshop Elements 9 and cannot open Raw files from my Canon EOS 1000D camera.

    I am using Photoshop Elements 9 on a Windows 7 based PC and would like to know why I cannot open Raw files produced by my Canon EOS 1000D camera.
    I have checked the version of the plug in as 6.5 for raw files which is supposed to open .cr2 files and should be compatible according to Adobe site info.
    any ideas for next move.
    Mick

    Hi,
    According to all of Adobe's charts, the Canon 1000D should be supported by the basic PSE 9 even without updates. When you said you checked the camera raw version in PSE, did you do that by going to the Help menu and selecting About plugins -> Camera raw?
    The Canon 1200D requires ACR 8.4 which is only compatible with PSE 12 - so for PSE 10 your brother would need the DNG converter.
    I can't find a sample raw file to try (I do have PSE 9). If you want to upload a sample file to dropbox and give me access, I could try it on my system.
    Have you tried opening one of your files on your brothers system?
    Nrian

  • Cannot open Raw files from RX100M3

    I cannot open (convert?) Raw files from my RX100 M3.   I'm trying to use Photoshop CS5 on a Mac.   I've installed Camera Raw 6.7.1 and Adobe DNG Converter 8.5.

    Support for the Sony RX100 III was just added into the very latest version of Camera Raw 8.5 which is only compatible with CS6, CC and CC 2014.
    Camera Raw plug-in | Supported cameras
    You need to either upgrade Photoshop or use the free DNG converter to convert all RX100 III Raw files to DNGs. Then you can edit the DNGs in CS5.

  • Creative Cloud is always empty and I cannot update LR and PS and cannot open RAW files from my new camera!

    My Creative Cloud is always empty.  I've had this trouble for over a year.  I cannot update Lightroom because of it and Photoshop does not update properly.  I cannot open the RAW files from my new camera, a Nikon D750.  Each time I want to update, I have to talk to you and delete things and reinstall things but it doesn't fix it properly!
    I have contacted Adobe before and always have to go through a tedious delete stuff and reinstall, then next time it happens all over again.
    I'm really fed up with it and want to know how to fix it properly.  I am in the UK, if that makes any difference.

    This is an open forum with a mix of program users and Adobe staff, not Adobe support... you need Adobe support
    Adobe contact information - http://helpx.adobe.com/contact.html may help
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • CS6 and lightroom cannot open NEF files from Nikon D7100

    My CS6 and lightroom 3 will not open the raw files form my Nikon D7100. Checked updates, all updates are current.

    You need Lightroom 4.4 or later for the D7100.
    For Photoshop, you need Adobe Camera Raw 7.4 or later.

  • DNG raw plug in 8.2 cannot open raw files from canon camera S120

    After downloading DNG raw plug in 8.2 for CS5 for the new Canon S120 camera, the raw file still cannot be open
    Can someone help

    Right, ACR 8.3 is for cs6 and cc; it will not work as a plugin update in CS5.  You should download the 8.3 DNG converter stand alone program from
    http://www.adobe.com/downloads/updates.html
    then use it to convert folders of your new S120 cr2 raw files to folders of dng files, which can be processed in your cs5 by acr 6.7 (latest cs5 release).

  • Cannot open RAW files from new camera

    I downloaded the first batch of photos from my new D7100 camera.  I have downloaded the latest version of Camera Raw.  But I cannot view the RAW files in Bridge or open them in PS5.  PC based.

    The latest version of ACR can not be use with old version of Photoshop like CS5.  You need to use the latest DNG converter  to create DNG versions of your D71000 RAW files.  And use the latest ACR version CS5 supports to create RGB image by converting the DNG files you generated for your Camera's RAW files.

  • Cannot open raw files from canon 6d in photoshop cs6 or lightroom 4

    I just bought a canon 6d but now the files are not opening in lightroom or photoshop. is there a plug in or something I can use to make these work?

    The Canon 6D has been supported since LR 4.3 and PS-CS6/ACR 7.3 so you may need to update.
    You can find LR updates on this page:
    http://www.adobe.com/downloads/updates/
    You should be able to update to ACR 8.7.1 via Help / Updates in PS’s menus.
    Or if that doesn't work, you can download the ACR 8.7.1 installer from here:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html
    Unless you’re still running an older OS, like Windows Vista or earlier or OS X 10.6.8 or earlier, then you’ll need the ACR 8.3 installer from here:
    http://helpx.adobe.com/x-productkb/multi/camera-raw-84-support-policy.html#Revert%20to%208 .3%20on%20Mac%20OS

  • Cannot open RAW file from Canon 1DX in CS6. I updated Camera Raw, PS, and Bridge. Also, I do not now see how to determine the version of Camera Raw that is installed. I have Mac Pro 1,1 running Snow Leopard.

    I

    Thanks, ssprengel!
    Updates did not install a version of ACR that would handle the files. I found the link to ACR 8.7 on another thread, but it wouldn't install on Snow Leopard.
    Camera Raw plug-in installer
    Fortunately I had an available install of Lion, and that did the trick -- ACR 8.7 is now installed and I can see my images! Thanks for your help.
    cheers,
    Bob

  • Cannot import RAW files from Nikon D70

    I have an iMac G5 running Leopard 10.5.2. When I try to import to iPhoto '08 from my Nikon D70, I get a message that says "The volume for DSC-xxxx.NEF cannot be found." The program then stalls and I have to force quit to get out of it. This happens whether trying to import photos from a card reader or from a desktop folder. I've tried re-installing both iPhoto and NIkon software to no avail. Any suggestions?

    tervguy
    Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
    Regards
    TD

  • Cannot open raw files from my Nikon D3200 in Elements 11

    After I found I could not open raw files from my new Nikon D3200 in Elements 10, and did a couple hours of searching the web site, I upgraded to Elements 11. Elements 11 also will not open the raw files from the D3200

    I found the solution in a Light Room forum.  The problem was I was using an older version of View NX2 to transfer the files. I uninstalled that version and installed the version supplied with the D3200. The files now load into Elements 11 with no problem. Apparently the old version affects the content of  the NEF files, as Elements was not able to recognize them, and gave an error message that the files were from an unsupported camera.
    Thanks for looking into this, Don Rieser  

  • Cannot open raw files from my D90

    I can't open raw files from my Nikon D90. I have one computer with elements 6 and another with 7 on it. I have installed Camera Raw 5.5 on elements 7 and reinstalled the program. Nothing helped. The files opened using the Nikon program provided with the D90. I also have a D80 and it works fine. I am out of ideas. Help Please!!!!!!!!!!!!!!!!! I believe the files are not damaged.

    Here are the directions from the download page of ACR 5.5 for PSE:
    http://www.adobe.com/support/downloads/detail.jsp?ftpID=4582
    At which step are you getting hung up?
    To install with Adobe Photoshop Elements:
    NOTE: You must follow all of the new instructions in order to successfully install the Camera Raw Plug-in for Photoshop Elements.
    1. Exit Photoshop Elements
    2. Open the download file and double-click CameraProfiles.exe and follow the on-screen instructions
    3. Open My Computer
    4. Double-click Local Disk (C:)
    5. Navigate to the location designated by your version of Photoshop Elements: (Please read directory carefully)
    a. Photoshop Elements 6.0: Program Files\Adobe\Photoshop Elements 6.0\Plug-Ins\File Formats
    b. Photoshop Elements 7.0: Program Files\Adobe\Photoshop Elements 7.0\Plug-Ins\File Formats
    6. Move the existing Camera Raw.8bi plug-in to another location (for example, a new folder on your desktop). Ensure you keep this version in case you need to revert back.
    7. Copy the Camera Raw plug-in, Camera Raw.8bi, from the download into the same folder as Step 5.
    8. Launch Photoshop Elements

  • PS 12: cannot open Raw files from Canon 70D

    PS 12 öffnet nicht die RAW-Dateien meiner Canon 70 D. Wer kann mir helfen?

    Camera Raw 8.2 is required. You probably have Camera Raw 8.0 installed with PSE 12.
    In PSE 12 try Help > Updates to update Camera Raw.

Maybe you are looking for