I just bought a Logitech Extreme 3D Pro Joystick but after plugging it into the USB Port of my MBP 17" 2.7GHZ I get an error stating that too much energy is being drained from that USB Port... It should be working though... Please Help...
I used to have the same one before and had used it this mac with success! So I don't understand why this is happening!
I used to have the same one before and had used it this mac with success! So I don't understand why this is happening!
Similar Messages
-
My screen wont light up. Its just blank on my iphone 4. I tried to plug it into the wall but that didnt make it light up it still wont turn on. Then i plugged it into the computer but the screen is still blank. Help me please i need my phone!
Restart your phone by holding the sleep/wake button and the home button until it starts back up.
-
My iPhone 5 Bricked after plugging it into the USB port on my AT&T car charger
I plugged my factory USB cable from my iPhone 5 into the USB port on my AT&T car charger and it killed the iPhone 5 dead. I guess I thought since Apple is making a 30 pin converter and that all of my other apple products work this way that it should work...I guess I was wrong!
Not Charge
- See:
iPod touch: Hardware troubleshooting
iPhone and iPod touch: Charging the battery
- Try another cable.
- Try another charging source
- Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
- Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar
Volume problem:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
I just purchased a new iPhone and I am not able to get into my iCloud. When I plugged it into my computer, I used iTunes to get my phone up and running. Well it gave me my old apple ID as my info. Now I cannot get into anything because I don't remember my old password and when I go to the website to recover my password it is of no help cause I don't remember any security questions(over 8 years old) and that email account don't even exist anymore. Now when I go to try I cloud on my new phone all it keeps doing is trying to verify my old iTunes and won't let me use my new apple ID to sign in it keeps sAying to type in my old password from my old apple ID that I just don t have. Can anybody help me?
Hello Timmy790
Try the suggestions in the article below to resolve the issue of seeing your old Apple ID on your iPhone.
iOS 7: If you're asked for the password to your previous Apple ID when signing out of iCloud
http://support.apple.com/kb/ts5223
Regards,
-Norm G. -
I'm really upset for ipod 4g.. After I update version 6.1.3 my facebook, safari and some other apps crash a lot.. I seriously need help... Apple i really love your products but ipod is breaking my satisfication.... Any solution.. oh and i didn't jailbroke it cause didn't want to detouch from apple...
See:
iOS: Troubleshooting applications purchased from the App Store
Contact the developer/go to their support site if only one app.
Restore from backup. See:
iOS: How to back up
Restore to factory settings/new iPod -
I can't drag and drop songs onto my iPod from iTunes. (Manual transfer is not working.) Please help!
Normally, I just select songs and I'm able to drag and drop them from my library onto my device. I have an iPod Touch and an iPhone 4. I want to drag and drop my songs from the library onto my iPod Touch. I have already selected manual upload instead of automatic sync. I tried suggestions from the Mac message board (since other people seem to have had a similar issue), and their solutions didn't work for me. I have restarted both iTunes, my computer, and reconnected my iPod multiple times. I don't know what's going on, and I can't find a fix anywhere in iTunes help. If anyone knows what to do, or has any suggestions, please let me know! Thanks.
Update: I seem to have fixed the problem! I went to the "summary" section of my iPod after clicking on the device on the left side of iTunes. I checked the box that allowed me to "manually manage music and videos" and applied this option. The songs are syncing! And, yay, they're playing on my iPod now! Hopefully, this helps anyone else who might have this problem. There might be other issues, but this is working for now.
-
I bought a new battery for my MacBook today. I put it into my computer, but when I click on my battery icon it says no battery availble. I would like to know why?
Hi....
Try restarting your Mac ...
"Keep in mind that once the new battery is inserted, you will need to press the power button to start up the computer."
From here > MacBook Pro: How to remove or install the battery
If it restarts ok the battery icon should be available from the status menu bar. -
my 160gb ipod just deleted its whole contents and keeps error-ing when i try to upload more songs to it! is there some way i can get them back, i dont have 2/3 of them stored as backup! hellpppppp!?!
You may not have a backup of those files, then. Have you checked for backup according to this knowledge base article:
http://support.apple.com/kb/PH1779 -
I Just bought a used 6th gen nano and when I plug it into the usb it says on my itunes page "an ipod has been detected but cannot be identified properly". I have already registered it. What am I doing wrong? Is it a faulty one?
The following document might be worth a try with that:
iPod nano: Error message saying that iPod 'could not be identified properly' -
I just bought a new mac book pro. I would like to access all my purchased games for mac that I made on my iMac. How do I do this?
Use the Migration Assistant(it'll put the data into a different user account if you've already created one), or drag them and their data through Ethernet, wireless, Target Disk mode, or through an external drive, or reinstall them from the original source.
(100927) -
I have just bought a new Mac book pro and I want to transfer my iTunes (including music, photos and apps on my iPod touch) from my old windows computer to the Mac... any tips? Is this possible?
(iPod touch 4, Mac Book Pro (osx lion))In Addition to the post by ds store...
You may find these Links helpful...
Move iTunes Library from PC to MAC
http://www.macworld.com/article/146958/2010/03/move_itunes_windows_mac.html
Download Past Purchases
http://support.apple.com/kb/HT2519
Also see this Excellent Link by Pondini on Transferring Old to New...
http://web.me.com/pondini/AppleTips/Setup.html -
Just bought an AirPort Extreme which requires a Airport Ulitity update. The update needed is not supported on my HD. It requires OSxV10.7.5 which I do not have. What can I do??
Options:
Update your operating system to 10.7.5 (Lion) or 10.8.x (Mountain Lion)
Use or borrow another Mac that is running 10.7.5 or 10.8.x to install the AirPort Extreme
Use an iPhone or iPad for the installation -
I just bought and installed logic pro x. and after instal it is asking for synapse audio DUNE registration.. where do I get that?
http://www.synapse-audio.com/
-
Just bought new AirPort Extreme did everything on manual and light still flashing amber , it is connected to an Arris TM822 from optimum cable company , help please
Any luck with the suggestions mentioned by Bob Timmons?
I am having pretty much the same issue.
Got a new modem Arris SB6141 and a new Airport Extreme ME918LL/A. Activated with my ISP (Comcast). Worked with a savy tech who knew the modem and Airport Extreme. Ensured all items were correct from the ISP side.
I follow the instructions as indicated for Airport Extreme by it fails to detect the internet and dns servers. Comcast suggested I call apple. Reading posts above I will:
-Reset the airport extreme
-Unplug the modem for 30min
Airport Utility 6.3.4 (634.17)
Airport Extreme ME918LL/A Firmware Version 7.7.3
MBP - Yosemite Mid 2012
Appreciate the assistance folks. -
Just bought a used Oct '13 MacBook Pro and I can't sign into the App Store as it still displays the old owners user ID in the login box (in fixed grey text). Any ideas of how I what I could do? Thanks.
The first thing you should do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. How you do that depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc, which you can get from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. I suggest you install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. If you don't have the media, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. You will need the Apple ID and password that you used to upgrade. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted from the disc, the USB device, or Internet Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive, which is what you should do.
After partitioning, quit Disk Utility and run the OS X Installer. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
You should then run Software Update and install all available system updates from Apple. If you want to upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it under your ID. In that case, contact iTunes Support.
Maybe you are looking for
-
2 DVI sources, but only 1 DVI port on my television
I have the 2009 Mini. I already confirmed that the DVI input on the back of my Sony CRT television gives a beautiful picture for the Mini (with the help of the supplied adapter). BUT, i also have a stand-alone DVD player with DVI that i have hooked u
-
Relinking all files in a document...
Hi all, I'm running InDesign CS6 on Mac (Mountain Lion). I am working off site from my office for a while, so I've copied all the files from our server onto my desktop. All of the filenames, folders are identical to those on the server. The problem
-
I am burning my mini dvs to one step idvd.Some dvds have no audio..don't know how to fix it
I am burning my mini dvs to one step idvds.Some of the dvds have no audio while others have...how to fix this audio problem?
-
Hi all, I am a recent convert ... trying to say goodbuy to my windows box. In the windows world, I'm a Sony Vegas user ... great product. Its easy to use, give the ability to use multiple audio and video tracks, and so on. As my new mac is a MacBook
-
Hi hope someone can help with this,I have created a number of sequences and have saved them as projects, I dont think i had an option to save them as a sequence. I need to assemble my projects/sequences to make my film but can only open 1 at a time,