I just bought a new 4s and I can't activate using cellular connection, what is wrong?
I just bought a new 4s and I can't activate it using cellular connection and Wi-Fi and also I can't seem to get the iTunes connection option from my phone as well. What can I do?
posted in error.
Message was edited by: Radiation Mac
Similar Messages
-
I have aperture 3.2.4 on my laptop and have the serial number, but just bought a new MAC and I can't get the Ver 3.0 link to work. Anyone know how to move it from my laptop to our new mac?
I am talking about the Ver 3 download link that came with the purchase email.
That link is no longer available. Use "Migration Assistant" to copy your Applications from your old mac to the new Mac, then immediately run software update. Aperture Version 3.2 will not run on your new mac with Mavericks, you will have to Upgrade to version 3.4.5 at least - you can download this update from the Support page: Aperture 3.4.5
Then launch Aperture and enter your registration key and try now too update from version 3.4.5 to 3.5 from the AppStore. The AppStore will change your Aperture registration to an AppStore version, so you will able to reinstall by downloading from the AppSTore in future.
If you want transfer only Aperture and no other applications, do it manually: You will have to copy not only the application but folders from the libraries as well:
/Applications/Aperture.app
/Library/Application Support/Aperture/
~/Library/Application Support/Aperture/
Leonie -
I just bought a new laptop and my ipod nano will not stay connected to my computer. When I first connect the ipod it starts to sync on my ipod but not on itunes. The ipod is initially connected to my computer, I can see it when I look on devices in my computer. However, when it finishes syncing it is no longer detected to my computer. I cannot transfer any of my songs to my new laptop because of this. I have tried to reinstall itunes, reset my ipod and use a different port. None of these things worked. Any ideas?
rubicon53 wrote:
I just bought a new laptop and my ipod nano will not stay connected to my computer.
I cannot transfer any of my songs to my new laptop
How to use your iPod to move your music to a new computer -
I just bought a new 4s and I can't send or receive texts. Also when anyone calls it comes up as "unknown" but I transferred all my contacts. Is this a device issue or a carrier problem?? I've tried everything. Reset the network and some a hard reset but no changes.
I believe the root cause is IOS5.01. same problem on my iphone4s with IOS5.01. Now I have a expensive I-touch! wake up steve.............. I suggest you change your sim cark from 64k to 128k. or just waiting next generation IOS.
-
Just bought a new iPhone and I can't back up to iCloud.
Just bought a new iPhone and I can't back up to iCloud. The error message says "Not enough storage". When I go to Settings>iCloud, it gives me 2 devices, my old iphone 4s has 3.5GB, the new 4s has 0KB. When I go to delete the old backup the warning says "Do you want to turn off backup and delete all backup data from iCloud?" That is definitely not what I want to do. How do I keep my data from my old phone? All I am backing up are contacts and calendar, my photos have never been backed up on iCloud. Don't get why that is taking up all the storage.
Deleting the backup from your old phone only permanently deletes the backup from iCloud. It doesn't do anything to the data on your phone, or the iCloud data your are syncing with iCloud. If you no longer need the backup of your other phone you can go ahead and delete it to free up space in your iCloud account.
-
I have just bought the new iPad and am keen to use face time. How can I automatically download my adress book from Gmail in to my contacts? I am very new with this. Thank you
Using FaceTime
http://support.apple.com/kb/ht4319
Trouble-shooting FaceTime
http://support.apple.com/kb/TS3367 -
I just bought a new iMac and now I amtrying to use it as a screen for my Macbook pro, but it don’t have a MiniDisplayPort the new model only have Thunderbolt which my Macbook don’t have. Isthere any way to connect this two mac’s anyway??
Screen sharing setup in 10.5, 10.6 are described by the links by operating system. 10.7 is fairly similar to 10.6.
And if both Macs have Firewire, you can setup a Firewire over IP network for fast communication between machines. Note if you have two different Firewire ports a 6 pin to 9 pin Firewire cable does exist. There are no Firewire to USB cables. -
Just bought a new printer and download the software
Hi,
I just bought a new printer and I need to be able to print all of my homework assignments off but i tried to come to the website on several occassions, the site is always down. So what do I need to do next? Do I call someone about the problem or do I just take the printer back and buy another one from another company. And I do not have a CD drive for my small laptop.Hi,
What is your printer and the Operating system of your small laptop ?
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I have just bought a new computer and downloaded itunes. I plugged in my iphone and upgraded to the newest itunes/ synched etc. Now have no music or apps on the phone. Contacts, texts, photos all fine. Just all itunes content that is missiing. It isn't showing in my itunes account on my computer or on my phone. Any idea how to get it back? (No point synching with itunes on my computer as it isn't there either!)
I suggest copying your entire iTunes library to your new computer, also you might want to copy the photos you want to save. Then sync your device to the new iTunes and copy over your music, documents and photos that you want.
If you are no longer going to use the old computer you should open up iTunes on the old computer and use the menu to deauthorize it. Be sure to use the same iTunes menu on your new computer to Authorize the new one. -
i just bought a new ipad and i am trying to install i cloud on my pc but it says my apple id is correct but wont allow me to log into i cloud
Did you already activate iCloud on your iPad, Settings > iCloud.
Then on your computer you can go to https://www.icloud.com/ -
Just bought a new iPhone and am having trouble with iTunes and App Store. I can log in to Cloud, iTunes, and app store but once I try to download, it says "Youe apple id has been disabled". I've reset my password three times and have no issue on my Pad.
Hi FuzzyDunlopIsMe,
Welcome to the Support Communities!
It's possible that resetting your password multiple times has triggered this security. Click on the link below for assistance with your Apple ID Account:
Apple ID: Contacting Apple for help with Apple ID account security
http://support.apple.com/kb/HT5699
Here is some additional information regarding your Apple ID:
Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
http://support.apple.com/kb/ts2446
Frequently asked questions about Apple ID
http://support.apple.com/kb/HT5622
Click on My Apple ID to access and edit your account.
Cheers,
- Judy -
I just bought a new Mac and migrated my CS6 over. Now when I open it, I'm told I'm running a trial version of Cloud. Why can't I use my CS6 version that I purchased? I don't want to pay for something I've already bought.
Here's how to convert the Trail to Permanent:
On receiving Trial/Trial Expired screen
Make sure that you are online
Click on license this software
Perpetual product owners: Log in with adobe ID and enter product serial number
Product should be licensed successfully -
I have just bought a new computer and downloaded the latest version of itunes. It has all installed fine, but when I plug my ipod and sync it, the music library shows all the songs and videos that are on there, but won't let me play them. Also, I can't add any new songs to the same library. It saves them elsewhere. I have had the previous version on another computer and it worked just fine. I have been online trying to find an answer but nothing. Hope someone can help me. Thanks
Installing iTunes does not cause content to magically appear on the computer.
Your media is only where you put it.
iOS devices are not backup devices.
Copy the media from the old computer to the new computer. -
I just bought a new Iphone and when I connected it to itunes and I downloaded the backup from my last device, now I can't pass this step and every time I connect it to itunes is the same thing. And I can't download any app because problems with my account regarding the credit card but the information is correct and it says it is not!!!
You'll have to contact iTunes store support regarding your credit card information problem: http://www.apple.com/emea/support/itunes/contact.html. I'm not clear on what you're saying about your backup. Are you saying that when you connect to iTunes it's asking you to restore from backup even though you already have?
-
I just bought a new iMac and cannot get my old HP Officejet G85 printer to work. What can I do to get it to print from the computer?
JCThe list of supported printers is below. Yours isn't on it.
OS X: Printer and scanner software available for download
Maybe you are looking for
-
Deep iMovie question: I accidentally deleted various EVENT files from my iMove EVENTS folder. Yes, they are really gone ... this is NOT a matter of restoring them from the trash. The projects are still there ... I can still watch the projects as lon
-
Oracle Resource Adaptor for Geronimo
For Apache Geronimo 1.1.1, an Oracle Resource Adapter was not available, so we had to write a ʻproxyʼ between the JMS queue and the Oracle Advanced queue. Is there an Oracle Resource Adapter available for Geronimo 2.1.3? I actually want a JMS interfa
-
WRT54G as an access point BY ITSELF
I am a college student. In my room at school, I have a Linksys wireless access point that I plug into the wall. Any computer that connects to the access point wirelessly gets an IP assigned by my college. This is what I wanted because I wanted to be
-
CALL TRANSACTION won't execute report, keeps returning to program
Good day to you! I have the following code: CALL TRANSACTION 'FPO4' USING bdcdata MODE 'A'. The last line in my bdcdata is to simulate pressing the Execute button (OK_CODE = '=ONLI'). However, instead of running the rep
-
Sending Purchase Order by Email
Hi, I need to send the purchase order by email, I've done that, but the vendor has multiple email address, let's say one for their financial dept, and another for the sales dept, I need to send the PO to the sales dept, but the PO is being sent to th