I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?
I just bought a new Mac mini and can't remember my password to get into the computer. Is there anyway I can unlock my computer without loosing all my files, especially all my photos?
Hi Jeff,
Reset Password 10.7, 10.8...
http://reviews.cnet.com/8301-13727_7-20087723-263/how-to-run-the-password-reset- utility-in-os-x-10.7-lion/
Then Reset your Keychain...
http://support.apple.com/kb/TS1544
Similar Messages
-
I just bought a new mac mini and an external DVD burner. I want to burn a DVD video and it will not play on the TV but only on the computer? Need this figured out for tomorrow. Can anyone help me?
Congratulations on the new Mini. Are you saying you tried burning and it does not play, or do you want to burn it only for the computer to be able to play it?
OS X Mountain Lion: Burn a CD or DVD may help. -
I have just bought a new mac book, and I want to start from scratch by syncing the content of my iPhone, but each time I try it wants to delete everything on the iPhone and replace by what's on the new iTunes library, i.e. nothing! can I do the reverse, i.e. importing all my iphone's stuff on the new computer?
You need to copy some files and your iTunes folder to the new computer. Do you have a backup of your old computer (or still have the old computer?) Was the old computer a Mac or PC?
MacWorld - Move an iTunes library from a Windows PC to a Mac
Back up your iTunes library by copying to an external hard drive
iTunes- How to move your music to a new computer -
Just bought a new mac mini, wireless keyboard, and track pad. My track pad will not synch. All advise I have been given is to change items in the setting menu, but I cant because I still have to get through the setup!!
The power button for the Trackpad is on the right hand end of the battery case. Press that button to initiate the pairing process. On the top of the Trackpad just above the power button is a tiny green light (you probably cannot see it unless it is lighted). That light will indicate ehther or not the Trackpad is discoverable. If the Trackpad has discoverable the green light will blink on and off. If it does not pair within 3 minutes you will have to press the power button again to re-initiate the pairing process. Once your Trackpad has paired, you can just leave it on and it will pair automatically when you reboot your Mac.
If you are having problems pairing, try turning off any other Bluetooth devices within 30 or so feet of your Mac mini. That includes other Computers, iPhones, iPads, etc. that may be in the area. Once your Trackpad has pairedwith your mini, you don't have to be concerned about other Bluetooth devices.
One other hint, I find that although the Wireless Trackpad does not eat batteries as fast as the Magic Mouse it still uses more than the Wireless Keyboard. It is a good idea to keep a supply of AA batteries around. I have used Apple's Rechargable batteries, but found they did not last that long before needing to be recharged. I have had the best battery life from Duracell Quantum batteries. -
I just got a new Mac Mini, and now when I try to import photos into Lightroom, iPhoto ties to load them first, then Lightroom can't find the files. Big problem. What to do?
Simple:
File -> Export to get your photos out of the iPhoto Library. In the Export dialogue you can set the kind to Original and you'll get back exactly what you put in.
Apps like iPhoto2Disk or PhotoShare will help you export to a Folder tree matching your Events.
Once exported, you can then trash the iPhoto Library - just drag it from the Pictures Folder to the trash and empty it.
After that, if you're entirely neurotic about it, just put the iPhoto app in the trash and empty it.
Regards
TD -
I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?
Bluetooth: How to set up your Apple Wireless Keyboard
-
I am exhausted just getting to the point of being allowed to ask my question. I recently decided to upgrade from an old PowerBook G4 that we have used for years, and am using now. I bought a new Mac Mini and a reconditioned Apple A1267 Monitor that was working beautifully when hooked to a slightly newer PowerBook in the store. Both the Mini and the monitor are plugged in, and attached to each other but I feel light a dolt. I cannot even figure out how to turn them on or even get a power light to come on. Can someone help me?
How is the Mini coonected to the momitor?
Does the power button n the mini not work? -
I have just bought a new Ipad Mini and I cant use it
I have just bought a new Ipad Mini and all I can get it Siri telling me to tap everything twice and we still don't get what we want
Try triple-click the Home button to disable VoiceOver (do it fast)
-
I just bought a new iPad min and it will not complete the initial up its been hooked up to me computer 2 days no results how can i send a photo of what it is doing apple almost complete white bar but won't go 100% ?
Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M. -
Just got a new mac mini and I can't figure out how to authorize it. Help!
Just got a new mac mini and cannot figure out how to authorize it. Help!
mLink your phone number and Apple ID for use with FaceTime and iMessage
-
I just purchased a new mac mini and would like to use my old dell monitor. I tried a HD to VGA adapter converter,it plugs in, but nothing shows on the monitor. Any suggestions?
What do you mean by "HD to VGA adapter converter"?
Do you mean have an HDMI to VGA adapter connected the the Mini's HDMI port?
Or maybe you plugged n the the included HDMI to DVI adapter and then connected a DVI to DVI adapter?
In either case that will not work since VGA is analog and the Mini's HDMI port is digital only.
You need to purchase a mini displayport to VGA adapter. It plugs into the Mini's Thunderbolt port.
http://store.apple.com/us/product/MB572Z/B/mini-displayport-to-vga-adapter
Make sure you get a name--brand one. I purchased some el cheapo, no-name ones and they did not work -
Hello, I just bought a 2013 Mac mini and I cannot get the sound to output to my Dell U2713HM monitor. I went to sound output but even though my Dell shows up there when I select it there is no sound output to it. I am using a mini DP to DP cable...Any ideas? Thanks
Hi Alxx911, and John Hammer1. After reading John's reply - " You can plug something into it's headphone jack. though" . I thought i'd try out of curiosity. I plugged in some headphones. I didn't expect anything to happen and nothing happened. The audio jack is for the Dell soundbar which is optional.
Here's a direct copy and paste from the users manual: Section About Your Monitor.
Attaching the Soundbar AX510 / AX510PA (Optional) CAUTION: Do not use with any device other than the Dell Soundbar. NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar AX510/AX510PAonly. To attach the Soundbar: 1. Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor. 2. Slide the Soundbar to the left until it snaps into place. 3. Connectthe Soundbar with the DC power connector. 4. Insert the mini stereo plug from the back of the Soundbar into the computerís audio output jack. For HDMI/DP, you can insert the mini stereo plug into the monitorís audio output port. If there is no sound, check your PC if the Audio output is configured to HDMI/DP output.
This monitor has no speakers. (Like John Hammer1 mentioned). The no speakers feature was one of the reasons I chose this monitor.
Good Luck ! -
I just received my new Mac Mini and want to migrate files from my Time Machine. I assume the old OS is on Time machine and I don't want it to supersede the new Yosemite OS. Do I have to Do anything special?
Using Migrations Assistant will only move the data and other things over, it will not bring over a previous version of the Os since the 2014 model can run anything earlier than Yosemite.
-
Just bought a new IPad mini and trying to transfer game center files from Ipod. How do I do this without losing level progress?
Restore from your backup of your iPod on your computer.
-
i just bought a new ipad mini and cannot figure out how to sync it to wi-fi, can you help me?
Tap Settings > WiFI. Look for your WiFi access point and tap that. Enter your password. Done.
Maybe you are looking for
-
Change a drop down list from read only/invisable on a radiobutton value
Hi All i am new to all this and need a few pointers? I have a form which was made using Livecycle Designer 8. On this form are a set of radio buttons (yes/no/NA). Is there a way to change the state of a drop down list from read only or invisible and
-
How do i transfer individual photos or albums from my iPhoto to my iPhone?
I have photos that I imported to iPhoto and tinkered with them on there. Now I want to put them onto my iPhone 5s to ultimately post them to Instagram. However, when I go into iTunes and attempt to sync the photos from that it just says that my photo
-
I have just update from FF4 to FF5 and normally I don't have any problems, but the robofrom extension (7.3.0) no longer works (RF version 7.2.8). How can I go back to FF4 until the extension works with FF5? Roboform is more important to me than FF5.
-
Dear All, I got a doubt b/n select and cursor. I read in one oracle book that select into clause will actually tries to get the data twice, Whereas the cursor will query only ones. Is this the case in Oracle 10g or both the select and cursor will fet
-
Premiere Pro CS5 and After Effects CS5
Hi I'm fairly inexperienced when it comes to Adobe products. I was wondering whether Premiere Pro CS5 and After Effects CS5 can be used together, for instance Premiere Pro to do the basic editing and After Effects to do some more advanced stuff befor