I just bought the new PowerShot G1X. Aperture cannot read the raw files. Is there a fix for this?
I just bought the new PowerShot G1X. Aperture cannot read the raw files. Is there a fix for this? I am using Aperture 3.2.2 with a MacBook Pro.
I don't know -- sorry. I don't think it matters -- once your camera is supported, you can easily force a re-processing of the Masters. If you can import them as RAW+JPEG pairs, I would. Set the JPG as Master until Aperture can convert the RAWs.
I don't use RAW+JPEG. Can someone who does offer some suggestions .
(Added:)
And _always_ back up your files. In this case, if you have to, you'll be able to re-import them.
Message was edited by: Kirby Krieger
Similar Messages
-
I just bought a new Mac mini but cannot complete the set up, as I could not pair my apple wireless keyboard with mac min. Can someone help?
Bluetooth: How to set up your Apple Wireless Keyboard
-
When I open iPhoto 9.2.1 it says that my library needs to be upgraded but when I upgrade the library I am trying to open (33 GB worth of pictures from 2006) the new application says it cannot read the files and how to find them on the system to reimport?! and then I'd like to erase the original files since the space requirement is huge!!!! Why is upgrading software iPhoto such a pain. I've gotta get a presentation done and all I get for my money is roadblock!!!
hello, it sounds like the library is damaged.
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. -
I use floating time zone with all of my iCal entries. But then the times of the entries do not print when printing month view. Is there a fix for this?
Sorry to have repeated this question as if I were answering it. Just a mistake. I'm just now learning how to use this site.
-
I am running Snow Leopard and have run the Keychain repair a few times to no avail.
Is there a fix for this or do I have to find another email program?This is frequent, not just occasionally. All cancel does is stop the email from coming through until I provide the password.
I thought about it being on the provider's end but it never happened when I was using Entourage, I just don't particularly like that program.
I don't understand why this problem has gone on so long without Apple doing something to fix it but I will continue to look for alternatives to the Apple Mail program. If I find a good one I will let all know through avenue.
Thanks again to all who tried to help. -
my iMac with os x allowed me to edit my administrator in preferences with my info and i didn't select the administrator priv. box now my mac has no administrator is there a fix for this or does it need a re-install
Apple support article:
Startup Grey Screen
You can try to check your hard drive.
Apple Hardware Test doesn't catch everything, so even if it doesn't find a problem, you could have one.
Apple Hardware Test -
When in dark mode, I'm unable to see the definitions on the screen when I'm looking up a word. Is there a fix for this?
Looking up definitions on the screen using Apple Dictionary? What application? Using shift+command+4, capture what you are referring to, and then use the camera icon in this posting toolbar to include it in your response.
-
Once I accept a calendar invite on my iPhone, I cannot delete or otherwise modify it. Even when it is updated or deleted by the invitor, it does not change on my iPhone.
My husband and I both have iphone 4's and we both have this same problem. I have an open ticket with apple, but so far they haven't been able to figure this out. First, they told me the problem was the mail server I was using. So, I tried sending/receiving invites from gmail and yahoo which they told me should work. Neither did. It doesn't matter whether the original invite was created in iCal or in Outlook or Google, once I open the invite in my mail and hit "add to calendar" the event is locked into my calendar. If the originator sends an update or cancels the meeting, I will receive an email with the new info, but the event doesn't change in my iphone calendar. This is completely lame. Why bother putting a calendar app on the phone if it can't handle basic functions?
Did you ever get a response from anyone or figure out a workaround? I'll post if I hear back from Apple with a fix. -
Aperture cannot read T2i RAW files
Another frustration withe the Apple software...
Why should i risk my health due to the Aperture developing team negligence?
If i don't have this issue resolved easy and fast, it's gonna be another complain to the BBB.
Thank you for your further contribution to resolve the issue.Supposed to be supported in Aperture 3:
http://www.apple.com/aperture/specs/raw.html
You have Aperture 3 and all the updates? -
I use task manager to kill firefox when it hangs.
A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox -
I just bought a new ipad 2, but cannot use it as it only shows the itunes logo and a cable. This means it's telling me to connect to itunes. I've done this and performed sync, still no way out. I have been told by friends to "unlock" it. Please how?
Have you already activated the iPad? That is what the screen is telling you to do - connect to the computer with the supplied cable and run iTunes while connected - and iTunes should guide you through the set up process. If you have already set up the iPad and you are still getting thos screen message - restore your iPad. You must be running iTunes 10.5 on your computer as well.
Restore iPad
If you can't restore this way, you will need recovery mode.
Unable to Restore -
I just bought a new Motorola modem. Do I need to reconfigure my Airport Express? For some reason we have WiFi even though the amber light is blinking.
Typically, when changing out networking hardware, it is always a good idea to perform a complete power reset of all of your networking equipment.
I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Continue with step 2 in the first set of steps.
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results. -
Hi, Just bought an ipod classic 160gb and i notice that when I turn the volume down all the way, music is still heard, i.e. I cannot turn it down lower than a certain volume. Is there a fix for this? Thanks
I've got a feeling that's the way it is. I know that if I turn the volume down all the way, I can still hear the music very softly -- which is great for listening when I have a migraine!
-
i just bought a new ipad mini and cannot figure out how to sync it to wi-fi, can you help me?
Tap Settings > WiFI. Look for your WiFi access point and tap that. Enter your password. Done.
-
I have cs5 and bought new camera olympus e-m1 photoshop does not open raw files is there a patch for it?
Familiarize yourself with these tables
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Camera Raw-compatible Adobe applications
The E-M1 was first supported by Camera Raw 8.3 which is only compatible with CS6 and CC. It is not compatible with CS5 or lower and never will be.
Some options:
Upgrade to CS6
Join the Cloud
Download the free Adobe DNG converter, convert all the Raw E-M1 files to DNGs then edit the DNGs in CS5
Camera raw, DNG | Adobe Photoshop CC
Maybe you are looking for
-
IPod video gives itunes the can't read or write error
I bought my iPod Video through the apple store shortly before Xmas. Since i was sepnding the holidays with my GF, she uses ugh windows. I formatted my ipod with windows, and got some songs on it and started using it. When I came back, around 3 weeks
-
Time machine problems w/ external hard drive and airport extreme
Time machine is keeping backup for only 6 days + the hourly backup. When I open time machine preferences, though, it appear that time machine is off. When turning it on it does not show my external hard drive (however, the backup has been running as
-
Chart doesn't display in Tabbed application
I am beand new to Flex Builder and am running into a problem that I just can't seem to figure out. I created a view-based application following the process outlined by Michael Chaize in his Flex 4 Dashboard video (with the exception that I am retrie
-
Enable scrolling instead of single page view (as default)
I have ebooks that open using "single page view", which is where you can't scroll DOWN the pages, it just automatically goes to the next page if you scroll the mouse down. I want to enable scrolling automatically. I can do this by going: View >P
-
Hello, I have been a mac user for about 3 months. I have around 3600 images in my iphoto library. I have noticed over the past week or so that it seems to be dropping images. I see grey boxes instead of thumbnails, and it keeps creating a directory c