I just did update of software and i lost all of my picture and songs from itune which is un usual .could any one tell me how could i get iphoto working again?
i just did update of software and i lost all of my picture and songs from itune which is un usual .could any one tell me how could i get iphoto working again?
What did you update with what? Are we talking a computer? A device like an iPhone? You updated iTunes? You updated the operating system?
If you updated the iOS on a device, I believe it warns you it will erase the device and you should make a backup first. Restore from the backup.
iPhoto is an application pretty much separate from iTunes. There is an iPhoto forum if you are having problems with that application.
Similar Messages
-
I updated to ios 5 and I lost all my video, pictures and anything I had written in Pages on my iPad2
I updated to ios5 on my ipad 2 and lost all my videos, pictures and things I had written in Pages, they are on Cloud , but I don't know how to get them back onto my ipad?
in order to restore your songs and apps, you should just reconnect to itunes and sync your data. your phone ran a backup before it upgraded, and you can also do a restore. but the key is still to go to your itunes and sync back to your phone what you wanted there in the first place.
-
I have an ipad 2, yesterday I updated my ipad going in to settings software update, then the ipad went into resore mode saying it needs to connect to itunes. I did that and itunes said it was goingo to do a resotre and I lost all my info, pictures, contacts. Is there a way to recover all my info?
You should be able to reconnect to iTunes and then you should see an option to restore to your ipad from your last back up in iTunes.
-
My iMessages don't work since updating. It says the Messages database is being upgraded, please wait while it finishes or Quit Messages and relaunch it later. How do I get them working again?
Back up all data.
Quit Messages if it’s running. Force quit if necessary. Relaunch it and test after each of the following steps. If the problem isn't resolved, quit again and go on to the next step.
Step 1
Make sure you know the ID and password you use with iMessage. Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Select the login keychain from the list on the left side of the Keychain Access window. If your default keychain has a different name, select that.
If the lock icon in the top left corner of the window shows that the keychain is locked, click to unlock it. You'll be prompted for the keychain password, which is the same as your login password, unless you've changed it.
Right-click or control-click the login entry in the list. From the menu that pops up, select
Change Settings for Keychain "login"
In the sheet that opens, uncheck both boxes, if not already unchecked.
From the menu bar, select
Keychain Access ▹ Preferences ▹ First Aid
If the box marked
Keep login keychain unlocked
is not checked, check it.
Select
Keychain Access ▹ Keychain First Aid
from the menu bar and repair the keychain.
From the Category list in the lower left corner of the window, select My Certificates. Look carefully at the list of certificates in the right side of the window. If any of them is marked with a red "X" as expired or invalid, delete it. Also delete all items with "iMessage" or "com.apple.idms" in the name, whether valid or not.
From the menu bar, select
Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Log out and log back in.
Step 2
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. Move the following items from the Library folder to the Trash (some may not exist):
Containers/com.apple.corerecents.recentsd
Caches/com.apple.Messages
Caches/com.apple.imfoundation.IMRemoteURLConnectionAgent
Containers/com.apple.iChat
Containers/com.apple.soagent
IdentityServices
Leave the Library folder open. Log out and log back in.
Step 3
Go back to the Finder and move the following item from the open Library folder to the Desktop:
Messages
Note: you are not moving the Messages application. You’re moving a folder named “Messages.”
If Messages now works, delete the Messages folder on the Desktop. Otherwise, quit Messages again. Put back the folder you moved, overwriting the newer one that may have been created in its place.
Step 4
In the Preferences subfolder, there may be several files having names that begin with any of the following strings:
com.apple.iChat
com.apple.ids
com.apple.imdsmsrecordstore
com.apple.imessage
com.apple.imservice
Move them all to the Desktop. There may also be a file with the name "com.apple.imagent.plist". Move that to the Trash.
Also in the Preferences folder, there's a subfolder named "ByHost". Open it and do the same thing.
Log out and log back in. Test again. This time Messages should perform normally, but your settings will be lost. You may be able to put back some of the files you moved to the Desktop in this step. Relaunch and test after each one. Eventually you should find one or more that causes Messages to malfunction. Delete those files and recreate whatever settings they contained.
If the issue is still not resolved, quit Messages again and put all the items you moved to the Desktop back where they were. You don’t need to replace the items you moved to the Trash. Stop here and post your results.
If you later decide that you don’t like the results of Steps 3 and 4, you can undo them completely by quitting Messages and restoring the items you deleted in those steps from your backup. -
I Connected My IPad 1st Generation To The Computed To Have It updated And I Lost All of My Pictures, How Do I Get Them Back?? Help, Please!
Did you backup the iPad first? If you did - restore from the backup in order to restore the photos in the Saved Album on your iPad. If the photos were synced to the iPad, then sync them back again via iTunes.
How to backup and restore from a backup
http://support.apple.com/kb/HT1766
If you did backup first, you will be restoring your most recent backup and you should be OK. But know that when you restore from a backup, you restore everything that is in that backup onto the iPad .... All documents, device settings, all data and so on. You cannot just select photos to restore to the iPad. It's all or nothing. -
my iphone 4 is stuck in restore after updating the lasted version. It was working fine before.How do I get it working again?
Hello, fschris.
Thank you for visiting Apple Support Communities.
When experiencing issues updating or restoring an iPhone, here are the best articles to go through. If you received a specific error number when restoring, see the section labeled Get more help in the second article below.
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Resolve iOS update and restore errors in iTunes
http://support.apple.com/kb/ts1275
Cheers,
Jason H. -
I had a trouble with my lap top and had to format hard disk and install all soft ware again. could any body tell me how to transfer the application and data in my i phone back to itune.
You can't. It still thinks that your iPhone is synced with another iTunes library (the one that you had before you reformatted the hard drive.
-
I was attempting to backup my iphone 5 getting ready to update it to ios 7 and i accidentally restored it to the settings of my last phone which was an iphone 4s and it erased all my new pictures and info off my new phone and was wondering if anyone knows how i can get them back and restore it back like i has it? Thanks
That means you have not a backup before accidentally restore your new iPhone 5.
So you should recover your new pictures and info with a third recovery tool.
This blog has a useful tool to meet you.
http://easy-iphone-recovery.blogspot.com/2013/09/iphone-recovery-resource.html
In step 1, you should choose 'Recover from iOS Device' in the main interface and then following the steps to get your pictures and info back.
Good Luck. -
My itunes has stopped responding how can I get it working again
My itunes has stopped responding how can I get it working again?
I have a related issue (I think, hard to know for sure from the short frustrated post above).
Since the last update of iTunes (11.0.5), it kind of freezes while checking for and downloading new podcasts. Processor load goes to 100% (sometimes above! figure from Swedish OSX "Aktivitetskontroll" which I can imagine is something like "Activity Control" or "Activity Manager" in English OSX) and stays there for a few minutes, 3-5 minutes is common. During that time the mouse pointer turns into a spinning ball when moved above iTunes. Other apps work ok meanwhile. (Four processors)
Have a fixed connection to the internet, which I have tested while iTunes is frozen. We acheive above 100 Mbit/s downstream, 20 Mbit/s upstream, so the connection shouldn't be the problem.
Any ideas on what to do?
iTunes 11.0.5 (Swedish)
MacOSX 10.8.4 (Swedish)
iMac 27", late 2009 http://support.apple.com/kb/SP576 -
I lost all of my pictures and videos as a result of upgrading to IOS 5. Can I recover them?
OK, so I lost all of the pictures and videos from the camera roll on my wife's ipod touch. This occured after upgrading it to IOS 5. I did a system recover in itunes and that didnt help. I downloaded iExplorer and went through the folders; found nothing. I have a feeling that all hope is lost. I'm not tech-savvy and should have known better by backing stuff up before upgrading. Just didnt think about it, because after every other upgrade, nothing disappeared. Well, just thought I would post here in case anyone else had any other suggestions. Thanks.
If you have a Mac this may work.
How To: Recover iPhone app data after a clean restore (OSX) | iSource
Otherwise, you did all you can. -
i backed up my ipod and i lost all my music. And its not letting me put my music back on my iPod and i also tried to buy a song from iTunes but it didn't download to my IPod. So now i dont have any music on my ipod now
What exactly happens when you try to sync?
Does iTunes see the iPod?
Was the iPod previous synced to another iTunes library/computer?
Have you successfully synced from this iTunes library/computer before?
If so have you done anything like update iTunes on the computer since it last successfully synced?
Do the songs play in iTunes?
Does any media now sync to the iPod?
Do you have the right boxes checked to sync?
iTunes: Syncing media content to iOS devices and iPod
Try syncing using the manual method
Managing content manually on iPhone, iPad, and iPod -
Could any one tell me what is the difference between swfloader and module loader?
Hi All,
Could any one tell me what is the difference between SWFLoader and Module Loader in Flex3 in detail?Hi,
ModuleLoader is a kind of strange API that is really just intended to look like SwfLoader for modules that contain a single visual component, and hides most of the module loading infrastructure, which is all about class factories.
What I mean by "only loaded once" is that if you have several places in the code that call the ModuleManager.getModule("url").load() call, it will only ever get loaded over the wire and interpreted once, subsequent "loads" will just re-dispatch pseudo-load events to the new client. In other words, the class factory is a singleton for a given url. Unloading is a totally different story. As you note, not everything is truly unloadable, because there may be lots of references to stuff in
the module that will keep it alive and un-GC'ed.
I suggest playing with the low-level API so that you understand the backing implementation, and this should help you understand the limits of ModuleLoader.
The main difference between modules and applications is that modules have lower overhead, and they only ever get loaded once, no matter how many times you load them. If you're using the ModuleLoader API, keep in mind that you're losing about half the functionality of the module system. I will assume that you are, because otherwise it would be obvious where to expose methods. You might want to play around with the lower level ModuleManager API just to get a hang of what's going on - ModuleLoader is a pretty thin veneer over the lower API.
Basically, what you want to do is to have your module implement an interface, say IModuleWhatever.
Also try and refer to this link which was previously discussed in this forum..
http://forums.adobe.com/message/74404
Thanks,
Bhasker -
My iphone was restored to its original state and I lost all of my contacts and applications... any ideas how I can get it back??
Why did you restore without transferring your music to your computer?
If you are in the U.S., then you can use the newly released beta version of the cloud to get your music. -
Can any one tell me how can I move to a different folder pictures, that I've cloned, without them staying aggregated? They all come together to the other folder and I don't want that… thanks
There's more to it than that.
Folders in Aperture do not hold Images. They hold Projects and Albums. You cannot put an Image in a Folder without putting it in a Project or an Album inside that Folder.
The relationship between Projects and Images is special: every Image must in a Project, and can be in only one Project.
Images can be in as many Albums you want. Putting an Image in an Album does not move it from the Project that holds it.
You can make as many Versions from a Master as you want.
What you want to do may appear simple to you, but it still much adhere to how Aperture works. I still can't tell exactly what you are trying to do (specifically: Images don't live in Folders; moving an Image from a Folder is non-sensical).
It can be very confusing (and frustrating) to get going with Aperture -- but it does work, and can be enormously helpful. If you haven't, take a look at the video tutorials on Apple's Aperture support site.
I feel as though I haven't helped you much -- but we need to be using the same names for interface items in order to get anything done -- and my sense is that you still haven't learned the names of the parts. -
HT5622 My apple I'd has been disabled. How do I get it working again.
My apple id has been disables. How do I get it working again?
Here's a knowledge base article that tells you what to do:
http://support.apple.com/kb/TS2446
Maybe you are looking for
-
I moved my iTunes library over to another hard drive, and had to resync my playlists. My voice memos are now all on my computer and showing up in iTunes but they're not on my iPhone 5. I'm running Windows and iTunes 11 (latest version). I keep che
-
SSRS Export to text and NOTHING BUT TEXT!
Is it possible to export a report to text only format? When I export my report to csv and then use the old DOS command to "type" the exported csv file there is a horrible little character at the beginning of the file. I need to export just as text a
-
MathType 6.7e with InDesign CS6 on Mac OS 10.6.8
We have created an equation as EPS/None format by using the MathType version mentioned above. The same equation was imported into InDesign CS6 and found that there was an extra space that occurred around the equations. But we did not give any additio
-
Datagrid display scrolling bug?
Hello, I'm developing an AIR application using the 4.1 SDK and have come across inconsistent display behavior from a datagrid when scrolling. My datagrid has three fixed columns created in MXML with the DataGridColumn tag. When the datagrid fires a
-
Xperia Z2 with Google Camera Photosphere only produces Crap Pics Help or suggestions needed.
Hi, I have the same problems with my Sony Xperia Z2 I hope somebody has found a solution for this. I really like the phone and it would be a pity to have to sell it again because i use Photosphere a lot. Actually, I was completely satisfied with the