I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

I just downloaded an iphoto update and when I tried to share my photos was asked for email and password.  I must have typed in the info wrong because I keep getting an error message.   I don't see how to change the info to the correct mistake..

I too added 2nd apple ID when I tried to get Free app from apple store just to get to NONE on the credit card needed. It said it sent confirmation email to my new apple ID email that I have to confirm. Problem is I can not get to the new apple ID email account.  On my ipad it logs into my original email account and I see no where to log into another email account.  If I go to my laptop, the new apple ID I created does not let me log into email where apple said it was sent to.  It did not send to back up email account either.
Can I log into 2 email accounts on my ipad where it says mail at bottom?
Can I have 2 apple ids?
If I created a 2nd apple id to get to NONE on credit card needed, can't I log into it also on another laptop in gmail?
(won't let me)
If I used my original apple id I created when I got my new ipad, it will not let me get free app without credit card, there is no where it says NONE needed. I am too new to apple to start with credit cards etc until I get use to it.

Similar Messages

  • HT201209 If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If I have redeemed my my gift and the balance is updated in the App Store and I still can not down load apps...what could the issue be?  I keep getting this error message "Your Purchase Could Not Be Completed". Then it refers me to apple support.

    If you haven't already contacted iTunes Support then you can do so via this link and ask them why the message is appearing (we are fellow users here on these forums, we won't know why) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi.

    I am trying to download the latest version of iTunes to my PC (windows XP) and I keep getting an error message or two. One is that it can't uninstall the previous itunes version, the other is that it can't find itunes.msi. I have tried removing  the old version in add/remove programs, but it says the same error. I tried deleting every thing that has itunes in the file/folder/etc and it didn't help.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out.  Any ideas how to fix this?

    When trying to download the new iPhone version, I keep getting an error message that my network connection has timed out.  Any ideas how to fix this?

    This is asked and answered many time each day.  The forum search bar is on the right side of this page.
    Disable your firewall/security software and try again.

  • I have changed my apple password three times because I keep getting an error message that my password is wrong when I try to log into the App storer

    I have changed my apple password three times because i keep getting an error message when i try to loggin to App Store.

    You may want to. I know that I've activated a few iPhones that belonged to other people on my own Mac and for some reason, no matter what they did, it always asked for my account password. I have no idea why this happens though.

  • Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"

    Im trying to download Final Cut Pro from the App store but I keep getting an error message when I hit "buy app"
    The error message reads: We could not complete your request, please contact Itunes support to complete this option.

    You are almost there:
    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • I am trying to update the new OS however, I keep getting an error messaging saying to have my connectivity checked since it is not connected. I ran a diagnostics test and everything passed. Any ideas on how I can to make sure a connection is established?

    I am trying to update the new OS system on my iPhone 4, however, when I connect to iTunes and try to download, I keep getting an error message that says the connection is not established. I ran a diagnostics test and everything passed, however, I'm not sure why I keep getting an error message when the software is at the end of downloading.
    Any tips?

    Disable your firewall/security software.

  • HT201263 HELP!! I am trying to do a restore and update on an iPod... I think it is the first generation.... I keep getting an error message. Done all the troubleshoots.... still nothing!

    I tried to do an update. Was prompted to do a restore and update. I am getting an error message. It will not restore OR update. I have tried all of the troubleshooting and it won't work now!

    Disable your firewall/security software.

  • Just did the iTunes update that iTunes said was available now iTunes won't open, keep getting Runtime Error message.  R6034 An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.

    Just did the iTunes update that iTunes said was available, now iTunes won't open.  I just keep getting a Runtime Error message. 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    Is anyone else having this problem?
    I tried to re-install and got the following message:  iTunes was not installed correctly.  Please reinstall iTunes.  Error 7 (Windows error 1114)
    Does this mean I have now lost everything?

    I just had the same error: 
    R6034
    An application has made an attempt to load the C runtime library incorrectly.  Please contact the apps support team for more info.
    I went to http://support.apple.com/kb/ht1925 and did a complete removal and reinstallation of iTunes. You MUST follow the directions here exactly...it's more than just iTunes that must be removed, and it MUST be done in the order in which the support article says.  I followed the exact instructions, and iTunes is back on my machine (no more C runtime error) and you do NOT lose your music...it's all in my library, as it was before.
    Good luck!

  • What did I do wrong? I used to have iTunes installed on this computer and lost it when it crashed. No I can't get past a certain point in the installation point. I keep getting an error message stating that I need to verify that I have access to this file

    Help!! What's going wrong here. I used to have iTunes installed on this computer but lost it when it crashed. I've tried re-installing it numerous times but I keep getting the same error message. "Error writing to file: C:\ProgramFiles\iTunes.Resources\es.lproj\iPadLicense.rtf. Verify that you have access to that directory." I know I have access to that directory because on a different computer I can sync my iPad and iPhone. What am I doing wrong? What do I need to go in and authorize or turn on? Any help greatly appreciated. Thank you.

    That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
    XP instructions in the following document: How to perform disk error checking in Windows XP
    Vista instructions in the following document: Check your hard disk for errors
    Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
    Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
    Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards?

  • I just made my apple account today and when i tried hen i to install a app my email and my password didn't work it just said like '' this apple id has not yet been used before in itunes store''

    i just made my apple id today abut when i tried to install a app from my iphone it didn't work it just said  '' this apple id has not yet been used before in itunes store'' i hope u can help me ...thx

    If you haven't already created an account in the app store:
    Scroll down to the bottom of the FEATURED page touch APPLE ID and CREATE ACCOUNT
    If you have already created an account in the app store:
    First of all, double check you're spelling the password right.
    If you're sure it's not the password, scroll down to the bottom of the FEATURED page in the App Store on your iPhone, touch APPLE ID: and then VIEW ACCOUNT and make sure you have the correct card details and billing address on your account.
    Also, connect your iPhone to your computer, then log in to the iTunes store in iTunes on your computer and check all your details. After you've updated your details sync your iPhone.
    If you still can't get it to work, book an appointment with a genius at your nearest Apple Store. They should be able to solve whatever the problem is.

  • I am trying to install current Firefox 3.6, as I am currently running an older Firefox on my Windows ME, but I keep getting this error message: "Setup has caused an error in SETUP.EXE Setup will now close."--Please help?

    I have downloaded all IP changer Privacy software I have purchased and am trying to install it, and although it is made to work with WindowsME that I am currently using on my computer, it now says it requires Firefox 3 or above to be able to install the software. Therefore, I am trying to update my Firefox to current 3.6 but once Firefox 3.6 downloads it doesn't install. Instead I just keep getting the same error message: Setup has caused an error in SETUP.EXE. Set up will now close. Several times, I have also tried restarting the computer as the error message also recommended But I just still keep getting the same error message when I try to update/install Firefox 3.5. Please help/advise on how I can fix this problem. Many thanks in advance!

    Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME.
    You can get it from here, but you are better off using K-Meleon (derived from Firefox) or Opera instead an old version of Firefox:
    [ftp://ftp.mozilla.org/pub/firefox/releases/2.0.0.20/win32/en-US/]
    You can try KernelEx to get Firefox 3+ to work, but it would be very slow with an old PC of less than 750Mhz. 3.5 and later supposedly doesn't work.
    http://sourceforge.net/projects/kernelex/

  • Im trying to upgrade to the 4.3.4 but keep getting a error message 3259 down load time out ?? can any one help

    I'm trying to upgrade to the 4.3.4 when im downloading it states that it has 32 hours download time ( has Apple cheged this )  but keep getting a timed out error message err=3259, is there anything i can do  (beside buy a mac)

    You cant try this
    Slide to Unlock Several users have been able to fix this issue by simply sliding the “Slide to Unlock” button on their iPhones before attempting the update.
    Disable antivirus software. If you are using Windows, try temporarily disabling antivirus software before applying the update.
    Disable firewall. Instructions for Windows XP, Windows Vista and Windows 7.
    Update router firmware. Check your router manufacturer’s website, and download and install any new updates for your wireless router. Alternatively, try plugging the ethernet cable directly into your computer.
    As last resort download separately 4.3.4 http://appldnld.apple.com/iPhone4/041-1923.20110715.BnATg/iPhone3,1_4.3.4_8K2_Re store.ipsw and use Shift + Restore button on itunes. Then restore your settings and etc. from backup.
    Remember to Beackup first, because Shift + Restore will make factory restore.

  • I am trying to download an App in the iTunes Store but I keep getting an error message that reads: "Could not sign in - An unknown error has occured." Why?

    I've downloaded the latest iTunes, set the DNS to 8.8.4.4, set the search domain to google.com, reset my Apple ID and password, restarted iPhone 4, closed out of the iTunes Store App, reset the router, reset the internet connection etc. etc. with no luck still. Everything else on the iPhone and internet connection is 100% functional with the exception of me being able to connect to the iTunes Store to download an app. Why? How do I fix it? Thank you for any and all responses.

    Ok..
    Installing the Mac OS X 10.6.8 Update Combo may help this.
    Restart your Mac after installing the combo then try downloading Lion.
    It's ok to install the combo even though you are already running v10.6.8
    BEFORE you do this make sure your Mac meets Lion's requirements:
    Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
    2GB of memory
    OSX v10.6.6 or later (V10.6.8 recommended)
    7GB of available spare
    From here > Apple - OS X Lion - Technical specifications
    Read this article before upgrading to Lion > Lion upgrade questions: Apple Support Communities
    And here >  What applications are not compatible with Mac OS X 10.7 "Lion"? What upgrade or substitute options are available for common incompatible applications? @ EveryMac.com

  • I Have an Iphone 4 and I am having constant hassles with facetime, I was wondering if anyone else is experiencing the same problems. I keep getting an error message saying bad connection. I have the latest updates installed on my Iphone.

    I have constant messages of Poor connection coming up on my phone when I facetime, I am at home and I am using my home wi-fi, Why is this happening.

    FaceTime uses Wi-Fi, so you have a weak Wi-Fi connection message. Your Wi-Fi needs to be upgraded.

Maybe you are looking for

  • How to fetch the BCC address using java mail

    Hi, I want to extract the mail address given in the Bcc address field of an email which I fetch it from the IMAP store !! I will be very much thankful if this problem is solved !! Thanks!!

  • How do I upload a Pages document (resume) to a website?

    How do I upload a Pages document, my resume, when it only gives the option to choose a file, no copy and paste option? And when I click choose file, pictures are the only thing that come up. Thank you for your help!

  • Acquisition & saving with smart camera

    I couldn't find an example about saving sequence images to hard disk with Ximea smart cameras.  I have a RL50C smart camera. I want to acquire and save images to hdd. Since I don't have LabVIEW installed in this camera, I need to program it in a deve

  • Smartforms & Scripts

    Hai can anybody tell me answers for these Questions...... 1.What is the difference between a script & a report ? 2.What are the components/elements in sap script ? 3.Can you create a script with out a main window ? 4.How many main windows can be crea

  • Database open for read-only access ORACLE

    while building a universe with a dblink betweens oracle databases, i try to create a derived table in the form select field1 from table@db_to_db2 but i get the following message: Exception: DBD, ORA-16000: database open for read-only acces State N/A.