I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green

I just got my cable company to switch my wireless router to a wired one considering now I have the wireless airport device (the newest one) but now I can't get a wireless signal. The router works when directlyplugged in,the aiport wireless device is green. I've tried going through my new MacBook Pro settings and it the diagnostics check, it says network changes detected, I tell it that it "yes" does connect to a cable modem, it tells me to restart it, after I do it asks if there are any other devices hooked up ( firewall) and when I say no it tells me that it can't fix the problem.
Now I know that I probably have a new IP address because of the cable company switching the boxes but it was working fine with the other box, now there isn't a signal to be had on it!
Please anybody out there that can help!!!??

Any time you change networking hardware it is always a good idea to perform a complete power recycle with the new equipment. Check out the following AirPort User Tip. Please post back your results.

Similar Messages

  • I add the google too;bar, but it never shows up. The box is checked in views-toolbars, but it I can't get it.

    I add the google too;bar, but it never shows up. The box is checked in views-toolbars, but it I can't get it.

    I'd first try downloading an installer from the Apple website using a different web browser:
    http://www.apple.com/itunes/download/
    If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

  • Can I get a 'timetable' of what labview does when it runs the program?

    Can I get a 'timetable' of what labview does when it runs the program? i.e. how long it spends doing each sub vi, and what order it does them in.
    Cheers 
    Solved!
    Go to Solution.

    Execution Trace Tool kit is an add-on. If you don't have it your pack of disks, ... maybe try a demo version?
    NI Spy get loaded with LV (or one of those things).
    Start >>> Programs >>> National intruments >>> NI Spy ?
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • HT201320 How can I get TRASH to show on my 5S when I slide the email to the right? I see more & Archive

    How can I get TRASH to show on my 5S when I slide the email to the left? I see more & Archive

    Hi SCAnn!
    Here is an article that can explain that feature for you:
    iOS: Understanding Gmail Archive
    http://support.apple.com/kb/ht4207
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • HT1414 My iphone 4 is stuck. master reset did not work. won't slide to unlock and if do get to the passcode screen, it won't recognize my entries.  I have tried connecting to itunes through a pc, but since I can't unlock my phone it won't let me do it the

    Iphone 4 is stuck.  I have tried a master reset and it didn't work.  it won't slide to unlock or power off.  I did somehow get to the passcode screen but it didn't let me enter anything.  I have also tried on a pc through itunes but since I can't unlock it, it won't let me do that either.

    http://support.apple.com/kb/ht1808

  • Can't get back to my mac to work when on the road. Have you?

    Read all the Back to my mac and how easy it is to set up and use. NOT!
    It only works when you have the laptop and the G5 right next to each other. Which is of no use!
    It does NOT share at all and the apple supt and store were no help. I' m able to print just fine anywhere in the house or even outside on my network. It will not share when I connect my laptop to another network. The G5 is on. I only have NAT enable on the 2wire.
    I have the 2Wire with the wireless enable and disabled it doesn't work either way. The only reason I got the airport and assoc card was to be able to use back to my mac when I am only the road.
    ANYONE ELSE ABLE TO GET IT O WORK.
    That problem one two is about networking with a windows computer that my brother has doesn't work either!

    Get help with multiple-NAT configurations for Back to My Mac
    If you have issues using Back to My Mac
    Set up and use Back to My Mac
    Set up security options for Back to My Mac
    Setting up and using Back to My Mac with AirPort Express, Extreme or Time Capsule

  • I have been purchasing songs on itunes for a year. I just got a new computer and I synched my iphone to it. I had over 100 songs, now I have only 10. Where did my music go and how can I get it back?

    I have been purchasing songs from itunes for the past year. I have over 100 songs. I recently got a new computer and I synched the iphone to it. I can't find 90% of my music. Where is it and how can I get it back? I checked itunes under purchased and it only shows 13 songs. Please help.

    You can only sync with one computer. When you synced to the new computer it would have erased it and synced what was on the new computer.
    You always need to have a backup, an iPhone is not a storage device.
    When you get a new computer you need to transfer your library before syncing
    If you don't have a backup you may be out of luck
    The only thing would be if you're in the US and have access to the iCloud beta to reload purchases
    http://support.apple.com/kb/ht2519

  • How can I get real time updates in multiple views when scrubbing through the timeline?

    I am using After Effects CS 5.5 on Windows 7. When I use the mouse to click / drag / scroll through the timeline, one view updates in real time, this is great! If I open a second view, it only updates that view when I finish scrolling.
    I would like to be able to scroll back and forth through the timeline, and have two different compositions update in real time (live update)?
    Is this possible?
    Thank you!

    The long answer is: No. It's not even a performance issue, it's how AE evaluates time, since time is fluid and can be mangled in a million ways from time-remapping to expressions...
    Mylenium

  • All of the font on my webpages is in italics. How can I get it back to normal? I tried going through the Troubleshooting steps, and opening it in Safe Mode; that did not fix the problem.

    I went through an Adobe update and when my computer rebooted, the default font for everything was in italics. For example, when I go to Yahoo.com, the headings for all the news articles and tabs are in italics. I tried going through the Troubleshooting steps to no avail. I am frustrated because I followed the advice of checking the default font under Tools, then I opened the browser in Safe Mode, then I checked to make sure all the fonts were available. So how can I get my fonts back to normal? The italics gives me a headache.

    The usual cause of that issue is a corrupted or missing font that Firefox replaces by another, in this case a bold, font.
    As a test you can try to disable the default font and choose a few different fonts (Arial, Verdana, Tahoma, Times New Roman) to see if you can identify the culprit.<br />
    you will have to reinstall that corrupted font.

  • HT4623 I upgraded to the iOS 7 and now I have a moving blue box jumping around my screen that I can't get rid of. How do I make it go away?

    I upgraded to iOS 7 and now I have a moving blue box jumping all over my screen. How do I make it go away?

    Settings>General>Accessibility>Switches>Switch Source
    Turn it off!

  • How can I get an ad hoc network to remain when I restart the device? I have to re-create it everytimerestart

    We use mac mini's in various mobile applications and its impossible to create an adhoc network and have it automatically sign back on with it when we restart or turn the mac mini back on. We use them in airplanes and the unit does not stay powered once the airplne finishes its trip. So we hae to train the pilots to turn it on and setup a new network and its very pesty. Any thoughts on how to fix this. We have already tried to create a new location and mive thr adhoc network to the top of the heirarchy list but it still wont work.
    Thanks

    Hmmm - I may be misreading your problem, but try this.
    Create the network. When you have the computer connected to the "server" computer, make an alias of the server computer and place it on the desktop. You can try putting the alias into the computer account "log in" items.
    Restart. The computer should execute the log in items and join the network if its available.

  • How can I get an flv video to stop playing when I exit the page it's on?

    The audio continues to play no matter where I navigate on the site.
    Thanks

    You want to stop the audio from playing and also downloading more video/audio if it is still downloading when you go to a new keyframe where the video display/component or mp3 player is removed from the stage because it's keyframe ended or do not exist anymore but you still hear the audio.
    Add an event listener to your video playback component that calls a function when the flash player tries to remove the video plaer from the stage that stops the netstream or at least stops/pauses the video playback.
    [link removed]
    //sample NetConnection and NetStream classes when the video player is removed from the stage tell the NetStream to stop playing or downloading the content with .close();
    var connection:NetConnection = new NetConnection();
    connection.connect(null);
    var stream:NetStream = new NetStream(connection);
    addEventListener(Event.REMOVED_FROM_STAGE, videoRemovedFromStage);
    function videoRemovedFromStage(e:Event){
       stream.close();

  • I can't get my headers to appear on pdf when i convert the file from numbers

    I have recently created an invoice document using Numbers and when I export it to a pdf document the headers and footers don't appear on the pdf document. I am using OSX 10.9.4.  How do I get the headers and footers to appear on my pdf document?
    I also get blank additional pages in my pdf document and I don't know how to get rid of these either.
    Any help greatly appreciated
    Thanks

    Hi Bootface,
    Instead of Export to PDF, Try Menu > File > Print...
    That will open Print Setup where you can see and edit the Page Headers and Page Footers.
    Click on Print... (bottom right of the Print Setup panel) then in the Print Dialogue click on the PDF Pop-Up (bottom left).
    Choose Open PDF in Preview or Save As PDF
    Your Page Headers and Page Footers will be included.
    Regards,
    Ian.

  • I can't get any sound! Doesn't work with headphones or the connector thing in my car and it used to! Help?

    I have a seventh generation nano whihc has stopped providing sound out of the blue.  It showa that it is playing on the screen, but no sound! I have tried re-setting it, different headphones and the adapter cord in my car and nothing works.  Any suggestions? Thanks!

    I'm having the same issue with my iPhone 4S.  I was hoping to find a solution around here somewhere. 

  • Somebody stole my iphone :| .. and i used someone else's apple ID i also have find my iphone but i don't have an apple ID (i use someone else's) So how can I get my phone back?? If i go to the apple store...can they find it for me without hesitation?

    IT WAS AN IPHONE4s

    Apple can't find it for you.  You have to go to icloud.com on a computer and sign into the iCloud account that was used on the phone, then see if you can track it as described here: http://help.apple.com/icloud/#mmfc0f2442.  If you don't know the password for your iCloud account you won't be able to sign in to track it.
    If it was stolen, contact the police and your carrier, and change your passwords.

Maybe you are looking for

  • There is no solution to Win 32

    I have been on the phone with Apple ipod for 2 hours. The problem is not Apple it is Windows and they can not fix it. So either your stuck with this piece of crap or you can return it and get a MP3 player, because Cory the "higher up guy" in Apple sa

  • Stored Procedure used as a data source for an Apex report

    Just wondering whether anyone has used a Stored Procedure as the data source for an Apex report. An option to select Stored Procedures(s) as the data source does not appear within the IDE (only displays Table, Views, Functions). Do you have to return

  • My iTunes is in Chinese won and not $. I've changed everything to us. Why?

    My address includes province and not cities as well

  • Apple help me please I dont have a Apple Device

    I went to login on iCloud.com using my (Apple ID) and it said you must use a Device to activate it, to I downloaded iCloud Control Panel and it says: Your Apple ID is valid but is not a iCloud Account WHAT DO I DO!!!

  • Significance of ResultSet.setFetchSize()

    We are using Oracle 8i as DB Server, WebLogic 6.1 as App Server and IIS 5.0 as Web Server on the different physical m/c. We are using OCI8 Driver. We have a utility that will act as a cache manager. We have to provide a query, it will hold the result