I just got the mid 2011 macbook air and it does not have ilife or iPhoto on it...isnt it supposed to come with it? and if it does then how do i get it on the mac without having to pay for it in the app store?

I just got a macbook air and i thought that it was supposed to come with ilife already installed? But there is not ilife apps...how do i get it on the laptop without having to buy them all from the app store if it was supposed to come with it?

From the iPhoto Licence:
3. Transfer.
A. Apple Software obtained from the Mac App Store is not transferable. If you sell your Apple-branded hardware to a third party, you must remove the Apple Software from the Apple-branded hardware before doing so.
B. For any preinstalled Apple Software, you may make a one-time permanent transfer of all of your license rights to the Apple Software (in its original form as provided by Apple) to another party, provided that: the Apple Software is transferred together with your Apple-branded hardware; (ii) the transfer must include all of the Apple Software, including all its component parts, printed materials and this License; (iii) you do not retain any copies of the Apple Software, full or partial, including copies stored on a computer or other storage device; (iv) you have not associated the Apple Software with your Mac App Store account as set forth in Section 2B; and (v) the party receiving the Apple Software reads and agrees to accept the terms and conditions of this License.
If the previous owner accepted the preinstalled software (iPhoto, etc) to the AppleID, it cannot be passed on to a new owner. Even if the previous owed would use her or his Applied to install it for you, you would never be able to reinstall it or to update it.
In that case buy your own copies of the software.

Similar Messages

I got a mid 2011 macbook air 13 with 128gb ssd is it possible to upgrade my storage?

i got a mid 2011 macbook air 13 with 128gb ssd is it possible to upgrade my storage?

It is entirely possible, as many have known from day one (as ifixit's first teardown revealed). Unlike the unupgradeable memory, the SSD is a discrete expansion card that is removeable with just one screw, after removing the case cover. It is however debateable as to whether such an expansion is worth the possible risk of making demonstrable changes to the MBA whilst still under warranty. So you may want to stave off consideration for a while.
I made the upgrade recently on my older 2010 MBA, and it was easier than upgrading the HDD on my old MacBook Pro.
Here OWC/Mac Sales has kits and instruction videos.

Getting Windows 7 on the Mid 2011 MacBook Air EASILY *TESTED*

Greetings!
As this is my first post, I wanted to make it count. Thus I have decided to compile a simple guide on EASILY getting Windows 7 installed on to your mid-2011 MacBook Air.
I have been following the many threads around here regarding the trouble people are having getting Windows 7 installed on to their Mid-2011 MacBook Air's. I have read complaints of Windows Support Software (drivers) downloads taking too long, of not being able to save the Windows Support Software correctly to a USB key, etc, etc.
The following process is relatively simple, but not as simple as it should be. I'm quite certain as Lion matures, some of the Bootcamp issues we have been having will be remediated.
This procedure has been tested on the following platform:
Mid-2011 11" MacBook Air ~ 1.6GHz i5, 4GB RAM, 128GB Flash (SSD) HDD
What's Wrong?:
1. On the MacBook Air platform specifically, users are expected to have a Windows 7 ISO before beginning. Some users have stated that this can be accomplished easily using the DISK UTILITY ISO CREATION FEATURE. THIS WILL NOT WORK. THE MOST IMPORTANT ASPECT OF PUTTING THE WINDOWS 7 ISO ONTO A USB KEY IS MAKING IT BOOTABLE! You need to make the USB key you're installing to bootable, plain and simple.
2. I tested the Windows Support Software drivers after downloading them and the Intel HD3000 GPU and Sound Drivers do not install properly.
3. Creating a Windows 7 Startup Disk through Bootcamp hangs.
What You'll Need:
1. A Windozzze box
2. A DVD-ROM Drive
3. Internet Access (for downloading a Win7 ISO in case you don't have a Win7 install DVD and other necessary utilities)
4. ISODisk - http://www.isodisk.com/ - 100% FREE
5. Windows 7 USB/DVD Download Tool - http://download.cnet.com/Windows-7-USB-DVD-Download-Tool/3000-18513_4-10972600.h tml- 100% FREE (you may also acquire this tool from Microshaft)
6. A little patience
7. A LEGAL Windows 7 license to activate Windows 7 after 30 days.
8. 2 FORMATTED USB DRIVES.
NOTE: Technically you only need 1 USB drive, however, you will need to get the Bootcamp drivers from OS X onto a USB key. To make this easy, the Windows 7 USB/DVD Download Tool will format one drive as an NTFS partition and the other drive should be formatted as a simple MS-FAT partition (can do this through DISK UTILITY, if you don't know how, Google it, very simple).
Let's Get'r Done:
1. Boot up your Windoze box.
2. Insert your Windows 7 Install DVD into your DVD-ROM.
3. (OPTIONAL) This step may be performed in lieu of step #2 if you don't have a Windows 7 Install DVD, download a Windows 7 ISO (don't download illegaly) from Microsoft. You may skip to step #6 if this is how you're to proceed.
4. Download and install ISODisk.
5. Create an ISO of your Windows 7 Install DVD - Select the DVD within the ISODisk app, choose a name and save location, create your ISO. *This takes a bit to complete*.
6. Download and install the Windows 7 USB/DVD Download Tool.
7. Open the Windows 7 USB/DVD Download Tool, ensure you have inserted the USB key you intend to use for Windoze 7, once the ISO has been created from step #5 or you already have one from step #2, select the USB button and create your USB/Windows 7 ISO Disk (all this does is place the necessary Windows 7 boot files on the USB key so that the Windows 7 ISO may be booted from the USB key).
8. Once complete, safely eject your Windows 7 USB key and move on over to your beautiful Mac. Place the Windows 7 USB Key aside for the time being.
9. Once booted, place the second USB key (the USB key you intend to use for your Bootcamp drivers) into your beautiful Mac. Ensure that it's formatted as MS-FAT, you can do this via DISK UTILITY, Google it if you don't know how.
10. Navigate to Mac HD --> Library --> Application Support --> Bootcamp --> Here you will find a BootCamp DMG file, this is a large file that contains the necessary Windoze 7 Drivers for the MacBook Air, DOUBLE-CLICK IT TO MOUNT IT, a FINDER window will appear revealing its contents. Perform a Shift-A to select all files, RIGHT-CLICK and select COPY.
11. DOUBLE-CLICK your MS-FAT USB key, PASTE the files from step #10 onto the drive. You now have your Windows 7 Driver disk. Place the Bootcamp Drivers USB Key aside for the time being.
12. Open the BOOTCAMP ASSISTANT, this is located in your Mac HD --> Applications --> Utilties Folder.
13. IMPORTANT!!!
Uncheck "CREATE A WINDOWS 7 INSTALL DISK"
Uncheck "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE" - At least for now to get you up and running.
14. Ensure that "INSTALL WINDOWS 7" is SELECTED and click continue.
15. Insert your Windows 7 ISO USB Key into your beautiful Mac.
16. Partition your drive accordingly, create the Windows 7 partition (the Windows 7 USB Key needs to be in the Air for this).
17. As soon as the partition is created, your air WILL REBOOT, the Windows 7 install will begin.
18. You will be prompted that the BOOTCAMP parition is not NTFS and needs to be in order to install Windows 7, THIS IS FINE.
19. Click FORMAT, the BOOTCAMP partition will be formatted as NTFS. Select the same partition number and continue. NOTE: The Windows install IS VERY fast on your beautiful SSD equipped Mac.
20. Once the installation completes, insert your USB Bootcamp key.
21. Navigate to the Setup.exe file on the key and double-click.
22. Sitback and let the Bootcamp drivers load. Windows 7 will reboot.
23. Install your Windows updates and reboot.
24. Reboot again and HOLD THE OPTION KEY, this will allow you to get back into your Mac.
25. Once in OS X, click settings and STARTUP DISK, select OS X (unless you want to mainly run Windoze).
26. Finished.
Please let me know if you should have any questions.
You should now have a fully functioning Windows 7 Bootcamp install with all drivers properly installed. You can check this by navigating to Device Manager within Windows and ensuring that you have no yellow exclamation marks.

Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN

How do I update iMovie from 08 to 11 without having to pay for 11 at the app store?

I have a pretty old Mac laptop, probably 1st or 2nd generation and I had to bring it to an Apple store for them to upgrade my operating system. Now my Mac version is 10.6.8 and I'm still using old programs on it like iPhoto 08 and iMovie 08. When I open up up iMovie, a message always comes up about iLife 11 which I would like to download as a whole so I can use the updated programs but I can not find the webpage where I can easily download iLife. All I really want is to upgrade iMoive from 08 to 11 but the only option I'm getting is to buy the app for about $15 from the app store. I already have iMovie and I shouldn't have to pay for the same app which just an updated version. Can someone show me step by step where to go and how to get the update for iMovie 11 or iLife 11 alltogether?

You have to pay because iLife is only free when you buy a new Mac. Its not part of the operating system.
$15 is a bargain for what you get.
Geoff.

I downloaded a ringtone yesterday and set it as my default ringtone. Today it is gone and I need to know how to find it or download it again without having to pay for it for a third time......

I downloaded a ringtone yesterday and set it as my default ringtone. Today it is gone and my ringtone is the standard default that came with the phone. I cannot find the ringtone in my settings and I don't want to have to pay for a ringtone for the third time. The ringtone does show up in my purchased file in itunes. How do I download it again?

http://support.apple.com/en-us/HT204076

Can you upgrade your mid 2011 macbook air ram?

Yes you can upgrade the ram of the mid 2011 macbook air, today I just asked an apple genius and they said they can but they cant do it in stores, they said it will cost approximately $200 but if you do it, it will be cheaper.

The guy also said that he upgraded his. He also asked other workers about upgrading the RAM and they said yes you can, but maybe he thought I was talking about a macbook pro. I think what he meant was to change the logic board.

Can my mid 2011 macbook air be upgraded to wifi 802.11ac?

Can my mid 2011 macbook air be upgraded to wifi 802.11ac? I am considering replacing my 802.11n router with the 802.11ac time capsule. Will this effect my download speed on my 802.11n macbook air (mid 2011)? can it be upgraded?

No, you cannot change the Wi-Fi hardware in your Mac. The Time Capsule is still worth it due to its ability to make backups of your Mac via Time Machine.

HT1727 i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

i bought some ringtones on my iPhone, later on i sync my iphone to my old computer now i have a new mac pro desktop and i only have 2 ringtones on my phone but not the rest of them how can i get them back without having to pay for them again?

If you bought them on your iPad then you will need to connect your iPad to your computer's iTunes and do File > Devices > Transfer Purchases to copy them over to the Tones part of your computer's iTunes library and you can then sync them to your iPhone - ringtones are a one-time only download, so you won't be able to redownload them directly on your phone.

I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again

I have a CS3 for windows and I switched to a mac. Can I get a mac version without having to pay for the suite again?

No.
Adobe only offers a Platform Swap on current software: Order product | Platform, language swap
CS3 is also too old to have an "upgrade path" and is no longer sold or supported by Adobe.
You do, as a CS3 owner, qualify for a 40% discount on your first year of a Creative Cloud Subscription though: Creative Cloud pricing and membership plans | Adobe Creative Cloud
If you don't want to go with the subscription service, Adobe does still offer CS6 (4 versions away from current & no longer receiving updates) as a "one time payment/download" perpetual license: Creative Suite 6

Mid 2011 macbook air. command key has popped off and is now missing the 2nd metal bar. can this be replaced?

The command key popped off my mid 2011 macbook air. It is meant to have two metal bars but can't find the 2nd one. I have clicked it back into place but if I press the button at the bottom the top pops up and I'm worried that if I don't fix the problem I may end up losing the key altogether!
Can you buy replacement metal bars? should I just remove the other bar completely?
Thanks in advance.

Sorry, must have been the crackpipe I smoked last night! LOL
You won't see anything in the Application Support --> Bootcamp folder unless you have previously downloaded the Windows Support Software. Good find.
ADDENDUM STEP:
This step should be placed between 9-10.
Open Bootcamp Assistant. Uncheck everything BUT, "DOWNLOAD THE LATEST WINDOWS SUPPORT SOFTWARE FROM APPLE". You will be prompted to burn the image to a CD/DVD or save to a USB Key. Save the image to a USB key. This will format your USB key properly in preparation for the files. The download commences and if you're lucky, the files will simply be saved to your USB key without having to manually copy them over to the key using the steps above.
IMPORTANT - Even if the support software hangs when its being saved to the USB key, you should now be able to navigate to the directory and see the image. Follow the steps above.
Apologies for missing this.
Best,
WBN

Mid 2011 Macbook Air - Yosemite keyboard and trackpad stopped working, the only button that worked was the power button, only one USB port works.

I have a Mid 2011 Macbook Air.
Upgraded to Yosemite last week.
Three days ago I was using my Macbook Air for the first time since upgrading to Yosemite. I had been using my Macbook Air for approximately 30 minutes, I was using safari and the keyboard and trackpad stopped working (would not respond). The only button that worked was the power button.
I rebooted and they were still not working. I plugged in a USB mouse and external USB keyboard, only one USB port would work (the Left USB port if looking at the screen) so I had to swap between keyboard and mouse.
After logging in there is a bluetooth icon at the top of the screen with a sawtooth line through it. Bluetooth is unavailable and the bluetooth icon is missing from the system preferences menu.
If I run a hardware test by holding D (on USB keyboard) at startup it says that no problems are found and at the conclusion of the test the keyboard and trackpad start working again. When I log on the bluetooth is working again.
I shut down the Macbook Air and when I started it again the keyboard and trackpad and right side USB ports were all not working again. I logged in using the USB keyboard and mouse and the bluetooth not available sawtooth icon had returned.
I ran the hardware test again and at the conclusion of the test the trackpad and keyboard started working again.
I have tried deleting com.apple.Bluetooth.plist and com.apple.Bluetooth.plist.lockfile from /Library/Preferences/ and tried resetting SMC and Power Functions but this did not fix the issue. The only thing that seems to work is running a hardware test - obviously I don't want to do this every time I use the computer.
I do not believe any hardware is faulty/damaged - I think it has something to do with bluetooth/Yosemite.
I do not have the Macbook with me at the moment, if you have suggestions that I can try or additional checks/info you require please let me know and I can get back to you.
Thanks,
John

Hi!
I have exactly the same problem, and I can't find any solution.
I can't even track down the root of the problem: the Bluetooth/Wifi module? The trackpad? The keyboard/top case? The logicboard?
I've tried all the usual: SMC/PRAM reset, clean install, kext cache clearing.
Any suggestion is greatly appreciated!

Endless Boot loop on the new 2011 MacBook Air

Has anyone experienced the Endless Boot loop syndrome on the new 2011 MacBook Air?
Mine is the 13" 4/128 model.
Tried the SMC reset but to no avail!
Am I the first one on earth?
Please help, Apple world!

It's not a hard core gaming rig, but it plays all the FPS games I like, quite well. It handles hi-def video, just fine. I use it for Photoshop, and it is quite fast. For web browsing, it has no equal. The 2010 maxed out 11" would do it all, except for some hi-def video (1080P), which it would stutter. But my new 2011 maxed 13", is perfect for video (1080P=no problem).
I really don't think a MBP will give you as much, on a daily basis. It (the MBP) has only a few advantages, and except for the built in optical drive (which you can still go external, if need be), none of the advantages you will miss even slightly.
I think the MBP would only serve me, if it spent most of the time deskbound, but I would still need an SSD. Once you have had an SSD, you can't go back. Then, you would have a really pricey MBP.

My Mid-2011 Macbook Air becomes extremely hot when installing apps from the Mac App Store and when deleting apps

My Mid-2011 Macbook Air 13-inch (OSX 10.8.1 Mountain Lion) becomes hot to the touch when trying to delete large documents, watching videos after waking it from sleep-mode and when installing applications from the Mac App Store. This has also been happening with OSX Lion before I upgraded it to Mountain Lion.

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
What needed to be done the day that you set up the new Mac was go into the Mac App Store (MAS), sign into your iTunes/MAS Apple ID, go to the Purchases pane and Accept the iLife apps that would have been there in a special section. That would have sent you Mac's unique identifier code to Apple's servers and verified that this Mac was eligible for the bundled iLife suite and then registered these apps into your MAS account.
You might try going to ~/Library/Caches/com.apple.appstore/adoption.plist, delete the adption plist, restart the Mac and then go to the Purchaes pane and see if you can Accept the apps into your account.

How do I return my mid 2011 MacBook Air to Factory Specifications? Can I use the built in Lion recovery and wipe my data from the hard disk by reformatting it?

I want to trade in my old mid 2011 MacBook Air for a new MacBook Pro. After I have transferred my data to the new MacBook Pro, how do I reformat the hard disk to wipe all my data and return it to Factory specifications? Will the built in Lion recovery allow me to do this? I am currently running OS X Yosemite. Has the upgrade to Yosemite damaged or removed the original Lion recovery partition?

Click here and follow the instructions.
(124038)

The [~] key on mid 2011 MacBook Air

I've got a mid 2001 Macbook Air with US keyboard (long left [Shift] key, horizontal [Enter] key, the [\] key above the [Enter] key):
http://files.itproportal.com/wp-content/uploads/photos/MacBook-Air-11in-mid-2012-3_original.jpg
In Remote Desktop Connection 8.0.15 for OS X, pressing the [~] key (the key to the left of the [1] key) does the same as pressing the [\] key (the key above the [Enter] key): when pressed alone, it produces the "\" symbol, when pressed along with
the [Shift] key, it produces the "|" symbol.
I don't need two backslash keys, I need the tilde key! What should I do?

Hi,
Please try to reinstall the app and check. Apart if there is any key mapping you can remap and try. Also In the "Input Menu" of "International" system preferences< scroll down and make sure US is the only keyboard checked.
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

I just got the mid 2011 macbook air and it does not have ilife or iPhoto on it...isnt it supposed to come with it? and if it does then how do i get it on the mac without having to pay for it in the app store?

Similar Messages

Maybe you are looking for