I just loaded Lion oxs 10.71 and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem
I just loaded Lion oxs 10.71 on my I-mac computer, and now my Logic 9 software wont show up it says its not compatible also i cant find my macintosh harddrive icon that is usually shown on dektop and device browser column can anyone help me with this problem.
Mike,
I had a similar issue with Photoshop when I upgraded to both Snow Leopard and Lion. it turned out to be Rosetta is no longer present in the newer OS. Once I upgraded to Lion, Appleworks stopped working after all these years.
Similar Messages
-
Hi, I'm using a white iPhone 4s with 16gb memory and having some problems. Whenever I use earphones the sound will be heated when the volume is at the highest if I turn it down any lower all I hear is static. Can anyone help me with this problem as I would appreciate it much.
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
No data is lost due to a reset. -
my ipod nano 7th generation won't play anything and when i click "radio" it says to plug in headphones when they're in. Can anyone help me with this problem?
Get a flashlight and make sure there is no obstruction/dirt/debris in the Nano headphone jack. Be sure you plug the headphones all the way in, the plastic on the headset jack should be flush with the body of the Nano.
-
the flashing light next too the camera is stays on,can anyone help me with this problem.thanks
Basics from the manual are restart, reset, restore. Have you tried these?
Have you read the manual? -
Can anyone help me with this problem?
Okay, here's the deal. My girlfriend's Toshiba laptop fell off her nightstand, and took a 2.5 foot fall to her hard wooden floor. It landed on the right side, which as you all probably know has both the hard drive and DVD drive. Setting aside the fact that it happened, let me explain the dilemma.
It powers up, but won't boot windows 7. I immedately think the hard drive is f*cked, but I'm not sure. It shows the Toshiba screen for a couple seconds, where you can enter BIOS. After that, it goes to a black screen with a blinking underscore at the top left hand corner. It then stays that way indefinitely, with the underscore eventually going away to where it's nothing but a black screen (but lit up, not black like when it's turned off).
I am convinced it won't pass POST. However, I'm not sure if it's the hard drive or the DVD drive. Here's why:
When I enter BIOS, I tried switching the primary drive check in the Boot tab, to where it checks the DVD drive first. Then when I restarted it, it would give me a message saying "drive failed to boot (dvd drive name here, can't remember off the top of my head)'". Does this mean the DVD drive is now defective, or does it fail to boot because of a lack of connection from the hard drive, which might be defective? If I keep the hard drive set as the primary drive being checked during bootup, I don't get that message. When I see her again, I will see if I can swap out her hard drive with the one from my laptop, assuming they have the same sockets.
I'm wondering, can a defective DVD drive keep a computer from loading the OS, or is it just the hard drive? I'm an amateur when it comes to computers, so these are the questions I don't know the answer to. One other thing to mention, is I disabled the DVD drive in BIOS, and it still wouldn't load windows 7. That's why I'm leaning towards a defective hard drive.
But, I'm not certain. I'm at a loss as to which it could be, or if it's even one of the two drives. Any help or other recommended procedures to do an at-home diagnostics check would be greatly appreciated. The model is a Satellite a665.
Thanks in advance, I really do appreciate any input!Reasons for Drive Failure
Hard drives are mechanical devices with moving parts, so they are subject to expected wear and tear, and can potentially fail mechanically at any given time. But most manufacturers will label their product with an expected average lifespan (usually provided in total expected number of functioning hours). But if a part is faulty or there are some manufacturing defects, a drive's lifespan can be over in as little as a day. Other factors are primarily external in nature. Power surges can cause drive failure, as can fire or water damage, along with a number of computer viruses. Exposure to high levels of magnetism can disrupt the normal functions of a drive, along with sharp impacts. If dust gets into a drive, it can become the catalyst for an eventual failure.
You could try to boot with this. It will test your HD!
I would say your HD is toast!http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Read more: http://www.ehow.com/about_5087073_causes-hard-drive-fail.html#ixzz2aOMvlQ8w
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
Everytime I connect my Iphone to my computer, it syncs, then soon after disconnects, then reconnects, and so on....Does anyone know why it's doing this? It makes it hard to back things up and charge it. I checked and my iTunes and iPhone software are updated and my computer is only 6 months old....help please!
Reasons for Drive Failure
Hard drives are mechanical devices with moving parts, so they are subject to expected wear and tear, and can potentially fail mechanically at any given time. But most manufacturers will label their product with an expected average lifespan (usually provided in total expected number of functioning hours). But if a part is faulty or there are some manufacturing defects, a drive's lifespan can be over in as little as a day. Other factors are primarily external in nature. Power surges can cause drive failure, as can fire or water damage, along with a number of computer viruses. Exposure to high levels of magnetism can disrupt the normal functions of a drive, along with sharp impacts. If dust gets into a drive, it can become the catalyst for an eventual failure.
You could try to boot with this. It will test your HD!
I would say your HD is toast!http://www.seagate.com/support/internal-hard-drives/consumer-electronics/ld25-series/seatools-dos-ma...
Read more: http://www.ehow.com/about_5087073_causes-hard-drive-fail.html#ixzz2aOMvlQ8w
I Love my Satellite L775D-S7222 Laptop. Some days you're the windshield, Some days you're the bug. The Computer world is crazy. If you have answers to computer problems, pass them forward. -
My art work isn't matching the song on my ipod 5, can anyone help me with this problem
I have the Ipod touch 5 and my art work isn't matching the song that's being played. For example if Im listening to Jay-Z, Fantasia's art work will appear. Has anyone else experienced this problem? If so how did you resolve it?
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device. -
Can anyone help me with this problem?? Internet and Picture mail stopped working?
I just got my blackberry curve (8330) about a month ago, and about two weeks ago, my internet and picture mail just stopped working. I get the message with the picture in it, but it says I cannot retrieve it. And then when I try to send a picture message, it always fails. As for my internet, it will take f o r e v e r to load, then it will say there is a connection error. And I went to manage connections and it says that I'm not connected to the blackberry internet or enterprise server. I've tried "provisioning it" because that is what the person I talked to on the sprint website said to do, but it loads for a few minutes and then says "Provisioning cancelled..."
Has this happened to anyone else?? How do you fix it?Hi and Welcome to the Forums!
I suggest the following steps:
1) Register HRT
Homescreen > Options > Advanced Options > Host Routing Table > BBKey (it does not matter which line is current) > Register Now
2) Resend Service Books
KB02830 Send the service books for the BlackBerry Internet Service
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code -
The airplay option is not longer available in my device preferences. Can anyone help me with this?
I can no longer connect to apple tv or my airplay device. The option in settings to allow access to airplay devices is also missing. Does this have a fix? I have a Macbook OS X 10.9.4 (13E28)
Hi Beverley2u,
If you are having issues with AirPlay not being available, I would suggest you troubleshoot using the steps in this article -
iTunes: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS5209
Thanks for using Apple Support Communities.
Best,
Brett L -
my 6th generation nano plays the same song over and over even though the repeat is not on.
It sounds like the repeat setting has been enabled. See page 21 of your iPod's User Guide for instructions on turning it off.
http://manuals.info.apple.com/en_US/iPod_nano_6thgen_User_Guide.pdf
B-rock -
I have money on my itunes account but it will not let me make a purchase.
Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
* Edit > Preferences > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
* Edit > Preferences > Privacy > Cookies: "Show Cookies" -
Is there anyone have the same problem?
Actually, if I read the release announcement correctly, it is available on "new" purchases." So even if you had a 5 from before the announcement, I'm not sure you would qualify.
-
i have an iphone 3gs and everytime i try to restore it on itunes it just keeps saying an unknown erroe has occured (29) can anyone help me with this??
Hello Laura,
Thank you for posting in the Apple Support Communities. I found an article that has information about Error 29:
Error 20, 21, 23, 26, 28, 29, 34, 36, 37, 40
These errors typically occur when security software interferes with the restore and update process. Follow Troubleshooting security software issues to resolve this issue. In rare cases, these errors may be a hardware issue. If the errors persist on another computer, the device may need service.
Also, check your hosts file to verify that it's not blocking iTunes from communicating with the update server. See iTunes: Advanced iTunes Store troubleshooting—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > Mac OS X > The hosts file may also be blocking the iTunes Store. If you have software used to perform unauthorized modifications to the iOS device, uninstall this software prior to editing the hosts file to prevent that software from automatically modifying the hosts file again on restart.
You can find the full article here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/ts3694
Best,
Sheila M. -
I just received photoshop elements 10 that I bought used thru Ebay, for my OSX Mac 10.5.8. I put the discs in my computer and nothing happens to help me download it. Can anyone help me with this instillation challenge?
Does your mac have an intel processor or PowerPC processor?
System requirements | Adobe Photoshop Elements
Did you insert the disk that is labeled mac os?
After you insert the disk, it should show on your desktop.
If you double click on the the disk icon on the desktop, does anything happen?
more info about the included disks:
FAQ: Installing Elements 10, or What do all these disks do? -
hi i cannot download ios 6.1.2 on iphone 5 , i tried to reset the setting and restart it but just cannot download. can anyone help me with this ?
First, plugged into a wall power socket.
You go to
Settings > General > Software Update
to update the new IOS 6.1.2
Maybe you are looking for
-
'This happens after a FF session is ended and am back on my desktop screen. If I then try to go back online a message says that FF is already running but is not responding. To open a new session you must first close the existing process or restart yo
-
Installation of hp laserjet 100 color MFP M175a on windows 8.1
During the printer setup, using the provided windows CD or via the Internet, after requesting for printer connection through the USB cable, the progress indicator stops at 99 percent and gives "fatal error". What do I do?
-
Problems with processing outbound IDocs in background processes
Hello everybody, I have a question for working with ABAP-PSS Ports. The behvaiour is that I want to send master data, for example customers, to a function module. This function module works like an converter which process and writes the files in the
-
Can a remote window be closed when the subvi is finished executing?
I am dynamically calling subvi's from a main vi with the but when the remote user closes the browser window, it is causing problems with the connection. I would like to be able to programatically close the web window when the called subvi is done run
-
Hi, I have a header material A-MRP type -PD. independent requirements maintined in MD61 for 25 qty. I have a bom compoennet B directly below A -MRP type -M1. Now when multilevel MRP is run for A using MD02 , i see no dependent requirements are gener