I just purchased a hp laser jet printer m1217 with AirPrint, i am unable to get it to connect to my time capsule wirelessly, i am currently using WPA2 personal any suggests

I Just puchased a HP laserjet printer M1217, i am trying to print wirelessly , the printer doesnot recognise my network, i am using a apple timemachine using WPA2 personal, anyone have any ideas

Don't know if you ever figured this out but here is the answer...
I just spent the last two days on this and have finally sorted it out. It actually isn't that hard to do but for some reason, no one has consolidated the information in one place!
First and foremost, make sure that you have all the latest and greatest firmware updates for your printer, your computer and your mobile devices.
Next, you need to connect your printer to your network via an ethernet cable, this is the only way to get in to the printer softare to configure it for your wireless network.
Navigate the printer menus on the keypad to Reports>Config Report and print this report. It will provide you with the IP adress and IPv4 address for the printer.
With the printer connected to your network and powered on, point your browser to the IP address of the printer. If this doen't work (it didn't for me) use the IPv4 address.
This will open the configuration panel for the printer and will let you configure the wireless for the printer so that it can join your wireless network. You will see various tabs across the top. Select network. Then along the left you will see wireless. Choose that. Now you should see a list of wireless networks available including your very own home network. Choose that one, enter your password and hit apply.
Disconnect the ethernet cable and you should be ready to Airprint from all devices. This worked for me, I can't imagine it won't work for all...then again...

Similar Messages

  • HT1444 I just bought an HP deskjet 3510 printer. I have a MAC OX X 10.5.8. I can't install it unless it is version 6. Any suggestions as to what I can do?

    I just bought an HP deskjet 3510 printr and I can't install it.  It tells me I have to have MAC OX S version 6.  How can I upgrade to this version?

    Found a way to utilize the HP Deskjet 3510 with the MacBook OSX 10.5.8!
    As you may know, there is NO existing HP printer driver useable between this printer and the OSX10.5.8 (you need OSX 10.6 or higher)  However, it IS possible to use the printer and even print from it - however, it is a bit complicated.  Read the PROS vs. CONS and see if you want to proceed OR...if you can, return it and get your money back.  Unfortunately for me I didn't have this option - if I returned it, I will lose 55% of what I paid for return shipping and restocking! .
    PROS: You can print documents, photos, files, etc.
    CONS: You can't print it directly as you would a normal printer. It will not work either with USB or via wireless. It must be sent as a document via e-mail (more explained later!)
    PROS: Copy/Scan-To-Print function works without needing a driver installed. 
    CONS: Scan-To-Computer function will not work because there is no driver compatible.
    PROS: Documents sent to you via email (on a personalized HP email address) will be printed out automatically when received.  You don't even have to be there to receive the email!
    CONS:  It WILL print automatically.  You can turn off this function but you will have to remember to turn it on everytime you need to print.
    OKAY.  Here it goes.  This model of HP Printer (Deskjet 3510) has a function called ePrint (you can find more info at http://www.hp.com/global/us/en/eprint/). Basically it is a wireless function on the printer that as long as you have Wifi at your home or business, you can connect this printer virtually.  This ePrint works with any computing devises, including MacBooks, Mac Desktops, iPhone, iPad, and iPad Mini - it will NOT work with iPods or any devise that does not have internet/wifi capability.
    This is what you need to do: Set up the Deskjet 3510 as if you would any other printer. That means, remove it from the box, unpack it, plug it in, follow instructions on the mini-screen (for date, language, etc), install cartridge, print test sheets, scan test sheet, etc.  Make sure that the machine actually works!
    Then comes the tricky part:  You will notice three buttons on the bottom.  Left one is the Power Button.  Right side has two buttons: first is the Wifi button, second is the ePrint button.  Before ePrint can be set up, you need to set up the printer for Wifi.
    CLICK on the Wifi Button (a flashing blue light) and look on the bottm left.  There is a menu section with 'Settings" - CLICK the button left of that menu (above the power button) you will see the wireless menu.  Make sure the Wireless is "On" and Wireless Direct also "On".  Use the arrows on the right of the screen to go up and down the menu, "OK" button to select it.
    At that same menu, scroll down to "Print Report" and click "OK".  Select the second option "Configuration Page" and print out the page.  If everything went smoothly with the Wifi connection, you will be able to see information.  Look for the URL(s) for Embedded Web Server on the page, either on the top by the General Information or under Wireless Direct.  You need the Server address for the next step.  Mine looked like this:
    http://192.168.223.1  (last four digits of yours may differ)
    Go up to your Airport Wifi menu and look for something like "HP-Print-44-Deskjet 3510 series".  Select that from the Wifi menu (from this point, you will NOT be on the internet).  Once you see the Wifi signal pop in, on the address bar of your web browser, type in your Server address in the address bar (http://192.168....).
    Then you will see a web page of inner workings of your computer.  It's quite amazing actually!
    Look for a section that shows Wireless Setup Wizard and follow to make sure you're set up to your network and connected to the internet.  Choose your wireless network name, put the password in. It should connect to your network.  Do the same for the ePrint section.
    Switch back to your Wifi network (via Airport so you would have internet access), go to https://h30495.www3.hp.com/c/46324/US/en/ to set up your printer with HP for ePrint.  This is where you get that private email address at HP (you can personalize it as well) so that any device that can email you can send documents, photos and files to be printed directly.
    SO the trick to printing with a MacBook OSX 10.5.8 with the HP Deskjet 3510 is this: Once you set up your private email address (let's say it's [email protected]) you can send attachments via email as if you were writing yourself (both the email AND the attachment will print!) or when you are about to print a file or a photo, select from the Print menu, the PDF section where you have an option to Mail PDF.  It will connect with Mail Program, send it to [email protected] (or whatever your private email name is : **********@hpeprint.com) and it will print the file without printing an email header.
    PRINTING NOTE: If you are printing a photo, you can set your presets to Photo print so that it will come out nice.  If you happened to be by your computer during the printout, you can install the photo paper (flush it to the right side) or else it will just print on normal paper.
    NOTE:If at any step the printer won't recognize the Wifi connection or ePrint, turn off the printer, count 30 seconds and restart it.  Mine worked fine after that!
    Whew~! Hope this was clear and was helpful!  Best wishes!

  • Can i use the laser jet printer P1102w with the i pad2?

    Can i use the P1102w printer with my i pad or i phone?
    This question was solved.
    View Solution.

    Hi,
    Your printer is Airprint Compatible with the latest firmware.
    Make sure your iPhone / iPad have iOS version 4.2 and above to support Airprint.
    Upgrade the printer firmware from your PC by using the tool below, by using the tool for your OS:
    Windows / Mac OS
    Then you will be able to print from the iOS built in Print function as long they are connected to the same network as your printer,
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • Laser Jet Printer P1007

    HI.
    I have installed Laser Jet Printer P1007, since about a month it is not accepting paper for printer.  First it accepts but subsequently stops and retry message comes though the paper is always full.  Please provide solution

    Welcome to the HP Forums paperunloading,
    I read your post, which indicates that the printer won't pull the paper in.
    I can help you with this.
    Make sure the paper tray isn't over filled.
    I have provided a document to go through the steps to see if that will resolve the issue.
    Attention Light Blinks on the Control Panel When a Paper Jam Occurs.
    If you need further assistance, just let me know.
    Have a wonderful day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • HP2420 Laser Jet printer only printing black pages

    I have an HP2420 laser jet printer that is only printing black pages.  I have tried 3 different toner cartridges so the cartridge is not the issue.  I saw that there are maintenance kits.  Could these help solve my problem and if so, how do I use them?
    Many thanks

    Okay, now where was the paper jam located? Was there any paper torn off when you cleared the jam? As I stated before, almost sounds like a voltage problem, might be one of the contacts might be having an issue. Also, since the machine is new, I would suggest contacting HP, the machine should still be under warranty, if it is in fact new, and see if they can either provide service for it or just replace it. That is of course if you do not get it resolved.

  • My HP 3015 laser jet printer is 220V. How can I run it on household 110V ?

    I got a brand new HP P3015 laser jet printer.  Because they are a fast printer, they pull a lot of power to keep the fusers happy.  In fact, the printer I got is a 220V model and it is not happy on just 110V household current.  How can I convert it to 110V?  Or, how can I feed it 220V worth of power at home?

    Hello @ReggieWagstaff ,
    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at http://h30499.www3.hp.com/hpeb/ .
    I hope this helps!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • Where can I download an user guide for a HP laser jet printer p2055dn ?

    Where can I download an user guide for a HP laser jet printer p2055dn ?   [email protected] 
    This question was solved.
    View Solution.

    Hi,
    You may not be able to find the manual for it but this is the manual for the P2050 series:
      http://bizsupport1.austin.hp.com/bc/docs/support/S​upportManual/c01461642/c01461642.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I find email address for my M1212nf MPF laser jet printer

    How do I find email address for my M1212nf MPF laser jet printer

    Hi,
    Same post:
      http://h30434.www3.hp.com/t5/Printer-All-in-One-Install-Setup/M1212nf-MPF-laser-jet-printer-finding-...
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • How do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    how do I get the driver for an HP 1005 laser jet printer now that I have changed my operating system

    Did you look on the HP website?
    Click the picture to go to the page.

  • I've just purchased an ipad2 and have synced it with outlook to get all contacts.  I've also set up my earthlink mail account and it sends/receives fine.  IS there a way to sync it so I get all of the legacy emails sitting in the OUtlook inbox?

    I've just purchased an ipad2 and have synced it with Outlook to get all contacts, etc.  I've set up the mail account and it is working just fine.  The sync doesn't pull over legacy emails from Outlook and my Outlook has been set up to remove them from the webmail server therefore they aren't available from webmail anymore.  Is there anyway to pull them over to the iPad? 

    But is there a way (simple or not-so-simple) to find
    out EVERY SINGLE FILE that's referenced on a
    timeline? (I have lots of stuff imported into the
    project that I know isn't used on any timeline, but
    I'm afraid of moving or deleting things for fear of
    never finding it again.)
    I'd love to get some sort of "printout" (a list or
    something) of every single file.
    There is, go to browser and cntrl click on any one of the columns,
    and select - show/source. A new column named "source" will pop up and will show where everything "lives". Click on the header at the top and it will justify the column as well. You'll notice this won't show anything for your seq.'s. of course, but will show stills/audio/motion files...
    Once you have the new column, you can drag it next to the "name" column and get a grab of it and print it if you like, or whatever.
    If you want to do this for just 1 seq., then can create a new bin and double click it to open it. Cntrl-A (select all) in your main seq. and just drag all into the new bin. You will see only what's in that seq. with the "source" column right next to it.
    From what I've read, you seem to get the MM thing and it's obviously what you'll need to do to archive as the guys said. But what your missing is a file path system to where everything resides.
    Hope this helps and that I've read you properly,
    Peace
    P-Book 1.5, 17" 2gsRAM   Mac OS X (10.4.4)   FCStudio

  • I have just purchased 2 songs and I went to sync my Iphone 3G and I get an error 13019.. the iphone "my name" cannot be synced. I have tried.. removing voice memos (I have none) remove all music.. syncs fine.. if I choose to sync music I get the error

    I have just purchased 2 songs and I went to sync my Iphone 3G and I get an error 13019.. the iphone "my name" cannot be synced. I have tried.. removing voice memos (I have none) remove all music.. syncs fine.. if I choose to sync music I get the error help..
    I have tried everything and now I dont have one song in my Iphone since it doesnt want to sync music because I get this error...
    by the way I have tried this
    http://support.apple.com/kb/TS2830
    and I have tried restoring the iphone...

    I translated..
    El problema -> El itunes me dijo que habían como 12 canciones que tenían mejor calidad. yo decidí intercambiar las canciones que tienen mejor fidelidad en itunes.
    Itunes me pregunto si quería que ponga las canciones que iva a remplazar en “desk top” a lo cual yo respondí que si. El itunes hizo algo.. no puso las canciones viejas en el desk top pero cuando fui a sincronizar recibí el error 13019.
    La solución para los usuarios de Windows.. busca todas las canciones *.m4a que se han modificado en tu compu durante el día del incidente.. toma nota de los nombres de las canciones.
    En itunes busca estas canciones y deselecciona las canciones.. (con suerte veras que las canciones están seleccionadas dos veces.. deselecciona todas las canciones que fueron modificadas en ese día. Al final asegurase que tienes seleccionado la opción de solo sincronizar las canciones que están seleccionadas en tu lista.) y trata de sincronizar con itunes..

  • I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    I have a wireless network at home. I run my iphone and ipad on it with no problems. Just purchased a MacBook Pro, and now my wi-fi keeps disconnecting and i get an error message saying another device is using the same IP address. What does all this mean?

    Hello AKCamus
    To give you some ideas of what to do next, I have provided a few articles that will give some troubleshooting Wi-Fi connections and recommended Wi-Fi settings.
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/kb/HT4199
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/kb/ts1398
    Troubleshooting Wi-Fi issues in OS X Lion and Mac OS X v10.6
    http://support.apple.com/kb/HT4628
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Will a CP1518ni color laser printer work with airprint with my iPad?

    will a CP1518ni color laser printer work with airprint with my iPad?

    Hi Ijergen,
    Yes you can use AirPrint as long as the printer is on the same network as the iPad.
    You can also try Google cloud, I will be giving you links below on how to go about it.
    AirPrint
    http://www.apple.com/support/ipad/assistant/airprint/
    Cloud print
    http://androidadvices.com/how-to-print-from-androi?d-phone-with-google-cloud-print/
    http://www.google.com/support/cloudprint/
    Thanks
    Josh.C
    Click on the BLUE KUDOS button on the left to say "Thanks"
    Although I am an HP employee, I am speaking for myself and not for HP.

  • I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

    Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
    iTunes: Advanced iTunes Store troubleshooting

  • Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested i

    Have got a Windows Vista basic and had run a a trial version of LR4 on it - just purchased an LR5 without checking out the complete system requirements. Can I get a complete download of LR4 so that the money I've spent is not wasted. I am not interested in upgrading to Windows 7 currently.

    There are still retail packs of LR 4 to be found out there - for example, on EBay. It's just important to be careful whether it's a full version, an upgrade, or a student + teacher version. And to be certain it's genuine, and has a serial number which has never been activated before. The serial number that you get with that, should work with any 4.x version of LR, on either MacOS or Windows. And it will almost certainly be heavily discounted compared with the previous price direct from Adobe.
    Of course the other way is to upgrade to Windows 7 SP1, which should also be available discounted, and thus eke out the life of an older PC (I personally would not go to Win8 in such a case). Maybe pick up some RAM also, if that's a problem, provided you can do so cheaply (since that will be simply thrown away in due course, when you get a newer PC),
    Using LR4 instead of LR5 you do miss out on a few nice features, as well as potentially the Raw support and lens profiles for more recent camera equipment.
    LR 4 is obsolete as far as Adobe is concerned. They will not sell a Serial Number for it.

Maybe you are looking for

  • BPM Process chain takes long time to process

    We have BI7, Netweaver 2004s on Oracle and SUN Solaris There is a process chain (BPM) which pulls data from the CRM system into BW. The scheduled time to run this chain is 0034 hrs. This chain should ideally complete before / around 0830 Hrs. <b>Now

  • I can no longer buy, download, or update apps/iTunes without being asked for apple ID and billing information to be declined

    I can no longer buy, download, or update apps/iTunes without being asked for apple ID and billing information. Even if apps are free or updating I'm asked for billing information. It's been like this for a couple of weeks after the purchase of a movi

  • Instrument I/O Assistant (sending command from labview to arduino)

    Hi, I am a beginner in Labview. I would like to control the intensity of AC loads using labview. In this case, i would prefer to use instrument I/O assistant. The instrument I/O assistant in labview will have to send a command to Arduino. The intensi

  • Problem exporting Video to mini dv tape, Audio OK

    Help! The video portion of my movie is not exporting back to a mini dv on my Canon GL-2, which is the camera I shoot with. The camera is recognized, and the audio gets recorded, but no video, just a black screen. I was able to export to mini dv on my

  • InvButton error

    I have built a banner ad in Flash 5 using the timeline (150 frames). The finish product runs great until I was sent a template to add an invButton with actionscript (below). I was told to just copy and paste. I get errors when this is added (See bott