I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

I just put a solid state hard drive in my mac book pro and used super duper to copy the hard drive and move the data over to thew new ssd, but most of my music isn't in iTunes when I turned it on? How do I get my music to show up in my new drive?

Many thanks lllaass,
The Touch Copy third party software for PC's is the way to go it seems and although the demo is free, if you have over 100 songs then it costs £15 to buy the software which seems not a lot to pay for peace of mind. and restoring your iTunes library back to how it was.
Cheers
http://www.wideanglesoftware.com/touchcopy/index.php?gclid=CODH8dK46bsCFUbKtAod8 VcAQg

Similar Messages

  • I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac

    I want to take files from my PC (using a Seagate external hard drive) then plug this Seagate External hard drive into my Mac Book Pro and move the files from the Seagate External Hard drive onto my Time Capsule. I do not want to put these files on my Mac. How do I do this? Where do I put these files on my Time Capsule? Will it affect the functioning of my Time Capsule?

    Mixing files with data is not always great idea.
    See info here.
    Q3 http://pondini.org/TM/Time_Capsule.html
    Why not just connect the PC directly to the TC by ethernet and copy the files over?
    It is hugely faster and much less mucking around.
    In windows load the airport utility for windows.. if you have not already as this will help you access the drive.
    There is more info here.
    http://support.apple.com/kb/HT1331

  • I have just had to replace my hard drive on my mac book pro and can now not sync my iphone which contains all my information onto the new drive, any ideas?

    I had to replace my hard drive on my mac book pro as it had died. Since getting laptop repaired I have been trying to sync my iphone with the new hard drive but it will not allow me to do this without first wanting to wipe the phone clean and put info on the hard drive onto the phone, of course there is no info on the hard drive at all. Any help will be greatly recieved.

    https://discussions.apple.com/docs/DOC-3141

  • Just replaced my hard drive on my Mac book pro. Photoshop will not open error 150:30

    Just replaced my hard drive on my Mac book pro. Photoshop will not open error 150:30

    This is more of a Photoshop question than a Mac question. I typed the error into Google and there seems to be multiple threads about it in the Adobe forums. Here is one:
    Photoshop Error 150:30

  • I am trying to upgrade my hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far, just before cloning may start and receive an "error 254" and can go no further.  Any idea what this error is?

    I am trying to upgrad the hard drive in my mac book pro using the disk utility in an attempt to clone my old hard drive.  I can only get so far throughj the process where its about to start cloing when I get a message " error 254".  Any idea what that means and how do I get around this issue so I can use my new hard drive?  Thanks for your input.
    Vince

    Connect the HDD to your MBP.  Open Disk Utility>Erase and drag the HDD icon inrt the Name field.  The format should be Mac OS Extended (Journaled).  Click on the Erase button.
    Then try the clone process again.  You may use Disk Utility>Restore or a third party cloning application such as Carbon Copy Cloner or Super Duper.
    Ciao.

  • I just had to get a new hard drive for my mac book pro and I have the old one saved onto a hard drive, how do I get all my saved info back onto the new hard drive?

    My hard drive on my mac book pro went so I had to get a new one. I had everything saved onto my external hard drive and I don't know how to resynch it to the new hard drive so my computer will have everything on it that it used to. does anyone know how to do this?

    Are you recovering Lion or later Time Machine backup with a Lion or later machine?
    If you are, then use this article:
    http://support.apple.com/kb/HT4718
    Other Time Machine restore options are here:
    http://support.apple.com/kb/ht1427
    Note, if recovering from a PowerPC Mac (iMac G5, PowerMac, Mac Mini G4, iBook, Powerbook), this tip is important:
    http://discussions.apple.com/docs/DOC-2295
    Otherwise use the recommended restore option with whatever backup software you used initially.

  • My hard drive on my Mac Book Pro failed last week.  I replaced the hard drive today and had to use my snow leopard disc that came with the computer to get teh thing going.  I was running Mt Lion which I had purchased last year on the old dr

    The hard drive on my Mac Book Pro failed last week.  I just put a new Samsung SSD in this thing and had to load the Snow Leopard OS that came with the computer.  I had Mt. Lion on the old drive that I had purchased last year but no boot disc made.  I have made several attempts to get the Mt lion soft ware on the computer but the Apple store does not have it only mavericks but my Snow Leopard version is too old for it so I cant get it either.  How do I get something to run the software that I had on the old drive?

    Unfortunately I lost my life and am trying to rebuild.  Isn't the technical era great.
    Backup, backup, backup
    As a minimum, use 3-2-1 (or even more)
    3 copies of your data (original copy counts as 1)
    2 different backup utilities/storage formats (protects from bugs in the software)
    1 copy off-site (protects against theft, fire, and natural disaster)
    More backup copies are even better.
    Backup disks are cheap compared to the lost of personal data that does not exist anywhere else.

  • I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

    I need a operating systems from my mac book pro. I will like to change my hard drive, I need a operating systems from my mac book pro. I will like to change my hard drive

    To reinstall the original OSX in your rMBP, boot the MBP using the COMMAND-OPTION-R keys.  The display should show a picture if the planet earth and you will be connected to the Apple servers.   Make certain that you have a solid Internet connection and follow the instructions.
    For SSD options look at this link:
    http://eshop.macsales.com/shop/SSD/OWC/Air-Retina/Apple-MacBook-Pro-Retina-2012- Drive-Internal-Flash
    Ciao.

  • Have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair files and i needed to format hard drive and start again. now nothing works

    have a mac book pro that crashed. ran disk utility to repair. comp booted and ran for short time. then crashed. ran repair again. disk utility said it could not repair disk and needed to format and start again.
    comp said it could not unmount disk and now when comp trys to boot all i get is a question mark on the screen. help

    Erase and Install
    1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
    4. Quit DU after formatting completes and return to the installer. Install Snow Leopard.
    5. After restart into Snow Leopard download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Can't connect my external hard drive to my Mac Book Pro. Any thoughts?

    I have a 2.0 TB WD Mybookessential as an external hard drive to my Mac Book Pro and I'm getting a "The disk you inserted was not readable by this computer" message every time I try to remount it. Any thoughts?

    Thanks for the suggestion, Cattus, it is in fact a formatted disk with a lot of valuable data, so I do not want to reformat the disk.
    I followed your advice, however the repair failed because of an "invalid B-tree node size".
    This is the log:
    2011-12-27 17:03:33 +0000: Error: Filesystem verify or repair failed.2011-12-27 17:03:33 +0000:
    2011-12-27 17:03:33 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
    Filesystem verify or repair failed.
    2011-12-27 17:03:33 +0000:
    2011-12-27 17:06:35 +0000:           Name :           WD My Book 1110 Media
              Type :           Disk
              Partition Map Scheme :           GUID Partition Table
              Disk Identifier :           disk1
              Media Name :           WD My Book 1110 Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           574D415A4131363338333935
              Device Tree :           /PCI0/EHC1@1D,7/@2:0
              Writable :           Yes
              Ejectable :           Yes
              Mac OS 9 Drivers Installed :           No
              Location :           External
              Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
              S.M.A.R.T. Status :           Not Supported
              Disk Number :           1
              Partition Number :           0
    2011-12-27 17:06:35 +0000:
    2011-12-27 18:22:01 +0000: Verify and Repair volume “disk1s2”
    Starting repair tool:  2011-12-27 18:22:01 +0000
    2011-12-27 18:22:01 +0000: Checking Journaled HFS Plus volume.
    2011-12-27 18:22:15 +0000: Invalid B-tree node size
    2011-12-27 18:22:15 +0000: Volume check failed.
    2011-12-27 18:22:15 +0000: Error: Filesystem verify or repair failed.2011-12-27 18:22:15 +0000:
    2011-12-27 18:22:15 +0000: Disk Utility stopped repairing “disk1s2” because the following error was encountered:
    Filesystem verify or repair failed.
    2011-12-27 18:22:15 +0000:
    2011-12-27 18:31:57 +0000:           Name :           WD My Book 1110 Media
              Type :           Disk
              Partition Map Scheme :           GUID Partition Table
              Disk Identifier :           disk1
              Media Name :           WD My Book 1110 Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           574D415A4131363338333935
              Device Tree :           /PCI0/EHC1@1D,7/@2:0
              Writable :           Yes
              Ejectable :           Yes
              Mac OS 9 Drivers Installed :           No
              Location :           External
              Total Capacity :           1.8 TB (1,999,696,297,984 Bytes)
              S.M.A.R.T. Status :           Not Supported
              Disk Number :           1
              Partition Number :           0
    2011-12-27 18:31:57 +0000:

  • How do I transfer files from an external hard drive to my mac book pro

    How do I transfer files from an external hard drive to my mac book pro?

    What files are they? Is it a clone, a TM backup, or simply drag 'n drop?
    If it's the latter, simply drag them back. If something else, please post back with detailed info.

  • Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Hi guys. Just a quick question. My wife has a Mac Book Pro and when she is browsing the web she can use a two fingered gesture to go back to her previous page (by swiping from right to left). Is there any way to set that up on my iPad Mini. Many thanks.

    Not in the Safari browser she can't. That is not supported on the iPad. There are other mobile browsers that do have that functionality - one is iCab Mobile.
    https://itunes.apple.com/us/app/icab-mobile-web-browser/id308111628?mt=8

  • How do I copy a home made HD video file (MP4 codec) of 10 GB from an external hard disk to my Mac Book Pro? Thanks

    How do I copy a home made HD video file (MP4 codec) of >10 GB from an external hard disk to my Mac Book Pro? Thanks

    I will never know if the problem was one of transfer or format compatibility.  The movie would not copy from one external hard diask to another, both attached to my MAC. But when the movie (which was in mpg by the way) was downloaded directly (without any other intermediary) into my external disk from the computer (a PC) where the movie was originated, the file did copy. And when I attached that external hard disk to my MAC, i could see it  using the MPEC streamclip app.
    Thank you anyway!

  • What is error code 0? Trying to copy a pro res.mov file to thumb drive connected to Mac Book Pro (2010 vintage).

    What is error code 0? Trying to copy a pro res.mov file to thumb drive connected to Mac Book Pro (2010 vintage).

    Problem solved! Thanks roam.

  • Hello, how would I go about using my time capsule as an external hard drive for my Mac book pro?

    Anybody know if I can use my time capsule as an external hard drive for Mac book pro?

    Just recognise the following.
    Store files on the TC.
    https://discussions.apple.com/message/24380694#24380694
    This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
    The TC is not suitable for network file server.. but many people having no choice press it into service as such.
    It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
    Major issues.
    1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
    2. The TC cannot be partitioned and mixing TM backups and data is not great.
    3. The drive is slow to spin up and quick to spin down.. there is no controls.
    4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
    5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
    6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
    7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
    Read pondini for some work arounds.
    Q3 here. http://pondini.org/TM/Time_Capsule.html

Maybe you are looking for

  • Unable to update apps on iPad mini. I have even restored the iPad and now I can't download any of my previously purchased apps.

    Can someone help me. I am using an iPad mini with iOS 7.0.4 with wifi connection. Have had no problems until recently when I was unable to update apps and then noticed that some apps would open but no data would be available in apps like intelicast a

  • External Disk Drive not ejecting

    I have a MacBook Air which doesn't have a disk drive built in so I bought an external one. I put a DVD in it, it all worked perfectly normal, once finishing the DVD I shut down the computer like I would normal but I forgot to eject the disk.  Its nev

  • Trouble with new episodes appearing

    My XML - http://www.baseballprospectus.com/feeds/fantasypodcastrss.xml I see the new content in the feed, and Podtrac has picked up the new episode just fine. 10 hours later, iTunes is still not showing the update. This used to happen rather instanta

  • PPR in custom services method

    Hi folks, I implemented a simple custom data service method in my view object (**ViewRowImpl), exposed it so that I can see it in the data control and dragged it to the form as a command button. In this custom data service I simply inserted a new rec

  • Linksys X3000 does not work properly in bridge mode

    Hi there. I have some trouble with my X3000, and I am not able to figure out what's wrong. This is the case: I have an ADSL-connection. I am going to use the X3000 as a modem only, and connect a router to it in bridge mode. Seems simple enough, but s